Categories

Best Tap Handles

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

  • ...ble Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for.
  • USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation.
  • Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter.
  • 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern).
  • Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach.
  • BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage.
  • Transparent hose is FDA approved 21CFR 175.300 PVC.
  • KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and bacteria that could otherwise make their way into the spout of the faucet ....
Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

  • Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Ratcheting t wrench works with GEARWRENCH pass thru socket system.
  • Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
  • Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.
Check Stock

Hanson 1765542 1/4-20 - 1/2-13 Pts SAE Set for Tap Die Extraction 12 Piece

  • Tap and die set includes: Fractional: 1/4" - 20 NC, 5/16" - 18 NC, 3/8" - 16 NC and 1/2" - 13 NC.
  • Also includes 1" die stock, die spacer, small and medium adjustable tap sockets and a T-bar.
  • Handles allow more comfort and control when threading.
  • The ergonomic handles on the drive tools allow more comfort and control when threading.
Check Stock

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank

  • For removing Machine Screws and Broken Hand Taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank

  • For removing Machine Screws and Broken Hand Taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

LitKiwi 2Pcs Beer Tap Handle,Premium Wooden Faucet Rustic Black Classical Style Handle,3/8 -16 Thread for Most Standard American Draft Beer Faucet,Homebrew,Kegerators And Bars

  • ★【Great Marterial】This beer tap handle is made of lotus wood, strong and durable, wear-resistant, suitable for long-term use.Abd the thread part....
  • ★【General Size】The Length is 10cm/3.93inches,both the thread is 3/8''-16 which suit for most American Beer Faucet.It can replace your old tap....
  • ★【Wide Application】Adapt to conventional taps and standard bar taps, including kettles, wooden barrels and pumps,widely applied at brewing....
  • ★【Classic Design】Beer tap handle is an important part of your tap both in function as well as aesthetics.The classical shape design gives the....
  • ★【Package Include】2pcs Rustic Black tap handles.If you are not fully satisfied with our product, we are always here for you..
Check Stock

Hi-Spec 39 Piece SAE & Metric Tap & Die Set. Complete M3 to M12 \\/ #4 to 1\\/2in Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece SAE & Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE SAE & METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. SAE & Metric Tap and Dies: 16 thread sizes from M3 to M12 and #4 to 1/2in with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

Chalkboard Beer Tap Handle for Kegerator with Monogrammed M, Perfect For Home Bar, Laser Engraved Keg Tap Handles, Craft Beer Gift, 8 Inch Tall Walnut Wood

  • Size: approximately 8″ L X 2″ W X 1″ T. They all have the standard 3/8 ” – 16 UNC threads..
  • Included: One monogrammed ‘M’ chalkboard tap handles.
  • Weight: 0.9 Pounds(Faucet is not included).
  • These chalk beer tap handles are laser engraved with monogrammed letter and features a chalkboard section to write the current brew..
  • Perfect brew beer gift for beer lover’s kegerator, breweries, bars, pubs, restaurants and homebrewers.
  • Chalkboard: Easily write any custom message with traditional Chalk! Simply erase with a damp cloth..
Check Stock

EdgeStar Full Size Dual Tap Built-in Black Stainless Steel Kegerator

  • Interior LED lighting. Unit is designed for indoor use only..
  • Surface-mounted drip tray, guard rail, & black stainless steel top cover included.
  • Black cabinet & black stainless steel door.
  • Two (2) 304 stainless steel "D" Sankey couplers.
  • Two (2) 3/16" ID x 7/16" OD PVC beer lines.
  • One (1) stainless steel air-cooled triple tap beer tower.
  • PLEASE NOTE: Delivery will be curbside, inside delivery is not available. A valid phone number is required for delivery purposes, please ensure the correct phone number is provided in your shipping information when placing this order..
Check Stock

Chalkboard Beer Tap Handle (2 Pack) For Homebrew Kegerators | Beer Tap Handles White Chalk Marker Included! | The Perfect Gift for Him | THE Tap Handle to never forget which beer you crafted again!

  • ✅ THE PERFECT CHALKBOARD KEG TAP HANDLE SET to never forget your newest homebrews again! Use the included white chalk marker to quickly and easily label your beer keg handles newest concoction..
  • ???? RENAME YOUR NEWEST SEASONAL BREW IN SECONDS! To wash off the keg handles chalkboard surface, simply follow the instructions that we put in the ‘Description’ portion of this listing to ensure the best results when switching out the name on your beer handle to your new brew!.
  • ???? A GREAT GIFT FOR HIM! This keg handle set is a great birthday or father’s day gift. Your homebrewer will love you forever when you give him this chalkborad beer tap handle set..
  • ???????? PREMIUM QUALITY AMERICAN BLACK WALNUT WOOD! This 8″ long premium quality keg handle looks great and will accent your home kegerator perfectly..
  • ????100% RISK FREE MONEY BACK GUARANTEE! – We want you super happy and excited about your beer tap handle set! If you aren’t, they’re on us.
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • ... portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
  • Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
  • Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock