Categories

Best Tap n lock Screws

TIME-SERT M8x1.25 Thread Repair kit P/n 1812

  • Time-Sert M8x1.25 thread repair kit P/n 1812.
  • Includes, Drill, conterbore, tap, install driver 5 inserts 11.7mm length.
  • The best thread repair on the market today!.
  • Solid bushing, self locking, positive placement repair.
Check Stock

Black Tap Lock for Perlick 630 and Perlick 650 Draft Beer Faucets

  • Protect your draft beer with our new Perlick 600 series heavy-duty aluminum tap lock. Simply slide this black tap lock onto a Perlick 630ss or 650ss....
  • This is a much better design than Perlick’s 308-40C wrap-around tap lock that is also used on the Perlick 630 faucet. This beer faucet lock is more....
  • VERY IMPORTANT: Look at the faucet lock guide chart in the pictures section to make sure your beer faucet is a Perlick 600 series and not a Perlick....
  • Note: This tap lock will not fit the following draft beer faucets: Intertap, MicroMatic, Perlick 500 series, Stout (Guinness-style) or European-style.....
  • All locks are keyed alike. Each lock comes with 1 key. Additional keys are available on Amazon. Search ‘Standard Tap Lock Keys.'.
Check Stock

GAZOZ PERFORMANCE Vacuum Tap Turbo Boost Gauge Sensor Adaptor Adapter for BMW F20 F30 316 320 N20

  • This auction is for VACUUM Tap Turbo Boost Gauge  Sensor Adaptor For BMW 320 328 N20.
  • This adapter installs between the boost sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection to a boost gauge..
  • Content: one piece of boost adapter and screws.
  • Required basic knowledge to installation boost gauges in cars.Feel free to contact with us to confirm car model.
Check Stock

Vito s Performance Idle Screw And Jamb Nut

  • Applicable:Yamaha Banshee and Blaster models.
  • Fit:1987-2006 Yamaha Banshee 350 YFZ350,1988-2006 Yamaha Blaster 200 YFS 200.
  • install a standard Mikuni idle adjuster into the carburetor body.
  • Kit includes:drill bit (# 6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts and instructions.
  • replacing part:BA01-0511 / BA01-0513 throttle kits.
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • ... immediately intuitive to have but become essential to your work once you have it. It does not matter if you are a mechanic, a craftsman, a metal or woodworker, or even a DIY enthusiast, a tap and die set would be remarkably useful to you. Taps and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
  • A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
  • Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
  • Instead of other kits which are made of low carbon steel, our kit are ....
Check Stock

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

  • 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
  • 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock

TAP BRACKET- Set of 4, Black, Easy No Drill Curtain Rod Brackets No Mess | As Seen on TV | Screwless No Nail No Drilling Curtain Rod Brackets Tap Into Frame | Hang On a Window Frame or Door + Pencil

  • FAST AND EASY, HANG CURTAINS IN SECONDS - Just tap on and you're done in an instant! Tap Bracket no drill curtain rod brackets create an instant curtain rod holder that's easy enough for anyone to install. Bundle includes 4 Black Tap Brackets and DQW pencil..
  • NO MEASURING, NO DRILLING, NO TOOLBOX NEEDED - Ditch the screws and nails. Why pay for an install when you can save time, money, and effort with professional looking results?.
  • HANG CURTAINS WITH CONFIDENCE - The reinforced steel design uses a locking pin and dynamic weight distribution to hold even the heaviest curtains up to 30lbs!.
  • NO HOLES OR DAMAGE TO YOUR WALLS - Prevent damage to your walls and molding. Tap Bracket hangs right on your window frames.
  • WORKS ON ALL WINDOW SIZES - Fits all standard sized curtain rods up to 1 1/8". Brackets can be spaced apart to fit any window frame and do not require any leveling or measuring.
Check Stock

TAP BRACKET- Set of 2, Bronze, Easy No Drill Curtain Rod Brackets No Mess | As Seen on TV | Screwless No Nail No Drilling Curtain Rod Brackets Tap Into Frame | Hang On a Window Frame or Door + Pencil

  • FAST AND EASY, HANG CURTAINS IN SECONDS - Just tap on and you're done in an instant! Tap Bracket no drill curtain rod brackets create an instant curtain rod holder that's easy enough for anyone to install. Bundle includes 2 Bronze Tap Brackets and DQW pencil..
  • NO MEASURING, NO DRILLING, NO TOOLBOX NEEDED - Ditch the screws and nails. Why pay for an install when you can save time, money, and effort with professional looking results?.
  • HANG CURTAINS WITH CONFIDENCE - The reinforced steel design uses a locking pin and dynamic weight distribution to hold even the heaviest curtains up to 30lbs!.
  • NO HOLES OR DAMAGE TO YOUR WALLS - Prevent damage to your walls and molding. Tap Bracket hangs right on your window frames.
  • WORKS ON ALL WINDOW SIZES - Fits all standard sized curtain rods up to 1 1/8". Brackets can be spaced apart to fit any window frame and do not require any leveling or measuring.
Check Stock

TAP BRACKET- Set of 4, Bronze, Easy No Drill Curtain Rod Brackets No Mess | As Seen on TV | Screwless No Nail No Drilling Curtain Rod Brackets Tap Into Frame | Hang On a Window Frame or Door + Pencil

  • FAST AND EASY, HANG CURTAINS IN SECONDS - Just tap on and you're done in an instant! Tap Bracket no drill curtain rod brackets create an instant curtain rod holder that's easy enough for anyone to install. Bundle includes 4 Bronze Tap Brackets and DQW pencil..
  • NO MEASURING, NO DRILLING, NO TOOLBOX NEEDED - Ditch the screws and nails. Why pay for an install when you can save time, money, and effort with professional looking results?.
  • HANG CURTAINS WITH CONFIDENCE - The reinforced steel design uses a locking pin and dynamic weight distribution to hold even the heaviest curtains up to 30lbs!.
  • NO HOLES OR DAMAGE TO YOUR WALLS - Prevent damage to your walls and molding. Tap Bracket hangs right on your window frames.
  • WORKS ON ALL WINDOW SIZES - Fits all standard sized curtain rods up to 1 1/8". Brackets can be spaced apart to fit any window frame and do not require any leveling or measuring.
Check Stock

TAP BRACKET- Set of 4, Silver, Easy No Drill Curtain Rod Brackets No Mess | As Seen on TV | Screwless No Nail No Drilling Curtain Rod Brackets Tap Into Frame | Hang On a Window Frame or Door + Pencil

  • FAST AND EASY, HANG CURTAINS IN SECONDS - Just tap on and you're done in an instant! Tap Bracket no drill curtain rod brackets create an instant curtain rod holder that's easy enough for anyone to install. Bundle includes 4 Silver Tap Brackets and DQW pencil..
  • NO MEASURING, NO DRILLING, NO TOOLBOX NEEDED - Ditch the screws and nails. Why pay for an install when you can save time, money, and effort with professional looking results?.
  • HANG CURTAINS WITH CONFIDENCE - The reinforced steel design uses a locking pin and dynamic weight distribution to hold even the heaviest curtains up to 30lbs!.
  • NO HOLES OR DAMAGE TO YOUR WALLS - Prevent damage to your walls and molding. Tap Bracket hangs right on your window frames.
  • WORKS ON ALL WINDOW SIZES - Fits all standard sized curtain rods up to 1 1/8". Brackets can be spaced apart to fit any window frame and do not require any leveling or measuring.
Check Stock

Wright Products - Standard Duty Pneumatic Screen and Storm Door Closer with TAP N GO White

  • IMPROVE YOUR DOOR SAFETY: Wright Products standard-duty pneumatic (air pressure) door closer is designed for out-swinging light-to-medium weight full....
  • TAP-N-GO: TAP N GO technology allows you to hold open the door with a simple tap of a button press.
  • This standard-duty-use door closer has a high....
  • ADJUSTABLE: Based on your preference, you can also easily increase or decrease the closing speed and force with a screw at the end of the pneumatic....
  • READY TO INSTALL: All installation hardware is included, no additional parts need to be ordered or added. Comes with seasonal latching adjustment....
  • CLEAN SUBTLE LOOK: Pneumatic tube and attachments come in a high-quality finish to blend in perfectly with the door and frame.
Check Stock

KTM Racing Tee Black M

  • Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job.
  • Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece.
  • Male Quick Disconnects will last for numerous wiring projects. Marine, automotive,....
  • Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently.
  • Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been....
  • Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out.
Check Stock

Tiny Home for Military Couple

  • ...ith faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, and restaurants, etc..
  • [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16" I.D. tubing, 1 beer tower gasket, 4 of M6 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower..
  • [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
  • [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. Directly installing on a kegerator dispenser would be easier, no drills needed..
  • [Upgraded Self-closing Springs & Keep Improving]: The package inclu....
Check Stock