HighFree 13PCS Boring Head, Boring Bar CNC Milling Tools, 2 inch R8 Shank Holder Boring Head Tool for The Milling Machine
- Qualified for precise tool alignment and squareness.
Check StockChicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit Black Oxide Finish #3 Morse Taper Shank 118 Degree Conventional Point 1 Size
- General-purpose geometry for drilling in.
- Manufactured from premium high-speed steel.
- Taper shank made to American National Standard (Morse) dimensions for use in corresponding Morse taper holders.
- Black oxide finish for increased wear resistance and added lubricity standard from stock.
Check StockChicago Latrobe - 53140 110 High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #2 Morse Taper Shank, 118 Degree Conventional Point, 5/8\ Size
- General-purpose geometry for drilling in a wide range of operating conditions and materials.
- Manufactured from premium high-speed steel.
- Taper shank made to American National Standard (Morse) dimensions for use in corresponding Morse taper holders.
- Black oxide finish for increased wear resistance and added lubricity standard from stock.
Check StockChicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit Black Oxide Finish #4 Morse Taper Shank 118 Degree Conventional Point 1-1/4 Size
- General-purpose geometry for drilling in a wide range of operating conditions and materials.
- Manufactured from premium high-speed steel.
- Taper shank made to American National Standard (Morse) dimensions for use in corresponding Morse taper holders.
- Black oxide finish for increased wear resistance and added lubricity standard from stock.
Check StockJacobs 33363 JK 130-1/2 Industrial Grade Keyless Chuck 1.0 to 13.0 Millimeter Capacity with 1/2-Inch 20 Threaded Mount
- High Grip Torque- Self-Tightening Feature Automatically Increases The Grip In Proportion To The Increase in Torque During Drilling..
- Wide Application- Threaded Mounts For Professional Portable Drill Machines And Taper Fit For Stationary Drilling Machines..
- Medium Duty Design For Various Applications.
Check StockPrecision Twist R51 High Speed Steel Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 29/64\ (Pack of 6)
- Long length (also called taper length) drill bits have longer flutes and overall lengths than jobber drill bits.
- 118-degree conventional point angles good for general drilling applications.
- Round shanks can be used with a variety of tool-holding systems.
- Uncoated (bright) finish, economical and useful with a wide range of drilling applications.
- High-speed steel (HSS), for use on a wide variety of materials.
Check StockHSS 1\ MT3 Taper Shank Drill
- Black Oxide finished for general purpose drilling in a wide range of materials, equipment and operating conditions.
- 9/32" Diameter ( 0.2812"), 6-1/4" Overall Length.
Check StockSHOP FOX M1036 Micro Milling Machine, Small
- Item may ship in more than one box and may arrive separately.
- Motor: 0.2 HP, 2A, 110 Volt, single-phase.
- Table size: 3-1/2-Inch by 8-Inch.Low speed range:0-3600,High speed range: 0-500.
Check StockPrecision Twist 5ATL High Speed Steel Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Conventional Point, 1.70mm (Pack of 12)
- Long length drill bits, also called taper length, have longer flutes and overall lengths than Jobber drill bits.
- 118-degree conventional point angles good for general drilling applications.
- Round shanks can be used with a variety of tool-holding systems.
- Uncoated (bright), economical and useful with a wide range of drilling applications.
- High-speed steel, for use on a wide variety of materials.
Check Stock
XINGYHENG 5 Piece High Speed Steel Hole Saw Drill Bit Aluminum Plate Hole Saw Cutting Kit Drill Bits Opener Cutter Tool Drilling Bit Set 16mm 18.5mm 20mm 25mm 30mm
- 1.Different Size: 16mm/0.62'',18.5mm/0.73'',20mm/0.78'',25mm/0.98'',30mm/1.18'', interval for each specification), total length 65mm/2.55''..
- 2.Cutting edge strictly symmetrical: Surface anti-rust treatment, smoother drilling and chipping.beneficial and efficient cutting, avoid offset drilling. Big space for chip removal, big space for chip removal, the chip resistance is small, the chip discharge is smooth, the heat generated by the hole is small, and the drilling is reduced..
- 3.Extraordinary cutting edge sharpness: Hex shank, titanium plated on the surface, high temperature quenching to improve hardness. The cutting edge of the drill bit is sharper than before, which can reduce the cutting force, reduce the drilling rate and improve the quality of the hole wall..
- 4.Made tungsten carbide bits, Using hard alloy (tungsten steel) material, with high hardness, high wear resistance, high strength, bending resistance, resistance to damage and other characteristics, complete specifications..
- 5.Fit for: There are a wide variety of drills to meet different application needs. All parameters of the milling cutter, such as core thickness and core taper, have been carefully designed and effective. Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling....
Check StockHillman 1087 Aluminum Round Head Slotted Wood Screw 8 x 1 in. 30-Pack
- Wood Screws Are To Be Used When Joining Two Pieces Of Wood.
- Wood Screws Also Taper Along The Threaded Portion Optimizing The Screws Holding Power In Wood.
Check StockHillman 1001 Aluminum Flat Head Slotted Wood Screw 8 x 1 1/2 in. 16-Pack
- Wood screws are to be used when joining two pieces of wood.
- Wood screws also taper along the threaded portion optimizing the screws holding power in wood.
Check StockHillman 1164 Brass Oval Head Slotted Wood Screw 6 x 3/4 in 48-Pack
- Wood Screws Are To Be Used When Joining Two Pieces Of Wood.
- Wood Screws Also Taper Along The Threaded Portion Optimizing The Screws Holding Power In Wood.
Check Stock
