1 Set Taper Gage High Precision Stainless Steel Wedge Feeler Hole Taper Gauge Ruler Measuring Tool

  • CONVENIENT TO MEASURE: Taper welding gauge is made of stainless steel, small size and light weight which is easy to carry. Simply structure, convenient to measure. You can place the gauge on a hole and read the measured value..
  • PRECISE RULER SCALE: Accurate figures and increments are etched into surface, easy to read.
  • DIFFERENT GAUGES: There are several different gauges in one set that can meet your different need..
  • APPLICATION: Taper gage set suitable for the measurement of inner diameter, aperture measurement, groove diameter and so on..
  • MEASURING RANGE: 1~7mm, 8~14mm, 15~21mm, 22~29mm.
Check Stock

Gaosi Tools conical Stainless Taper Welding Gauge Test Ulnar Inch Metric (45-60mm)

  • Welding taper gauge:3-16mm (0.12-0.63 inch).Accuracy: 0.1mm/1/64" .The total length 195mm(7.68 inch) inch.
  • Made of high carbon stainless steel, miniature and light weight, pocket size. durable.New design..
  • Accurate taper throughout the length of the gauge makes it convenient for measuring diameters of small holes, slots etc..
  • With imperial scales on one side , this is an ideal tool for die makers, machinists and on inspection floors..
  • Polished, bright and clean without burr, rust laser engraved line and will not rub off . For accurately measuring of cylindrical bores, helping you to get the correct size for repair/replacement of wall wart cords, etc..
Check Stock

Ruifan 4Pairs Black Plated Surgical Steel Gauge Ear Screw Taper Tunnel Expander Stretching Kit Plugs Piercing 4 Styles Same Size 4g(5mm)

  • There have 8G(3MM),6G(4MM),4G(5MM),2G(6MM),0G(8MM)sizes available,please choose your size..
  • The stretching kit Comes with:1 pair stainless steel straight taper + 1 pair single-flared tunnel + 1 pair double-flared ear gauge tunnel plugs + 1 pair screw tunnel.
  • All styles are individually packaged according to size and style..
  • Package Included: 4 pairs (1 pair for each style) taper plugs, come with one free gift velvet bag..
Check Stock

PiercingJ 4pcs 12G-00G Black Stainless Steel Tapers Stretcher + Ear Single-Flared Tunnel Gauge Ear Stretching Kit

  • Material: Surgical Stainless Steel + Rubber O-Rings.
  • The stretching kit Comes with: 1 pair stainless steel Taper + 1 pair Single-flared Tunnel.
  • Taper & Tunnel Gauge: 12G=2mm, 8G=3mm, 6G=4mm, 4G=5mm, 2G=6mm, 0G=8mm, 00g=10mm . Please choose suitable size..
  • Each taper and tunnel size is individually packaged and size verified..
  • Easy and comfortable to stretch your ears.
Check Stock

MICROJIG GRR-RIPPER TJ-5000 Microdial Tapering Jig For Table Saws, Yellow

  • The Most PRecise, Versatile Tapering Jig.
  • The MICRODIAL gauge locks in exact incremental taper angles.
  • Precision tapered cutting as accurate as 1/8 of degree.
  • Works with the GRR-RIPPER 3D PUSHBLOCK system for ultimate safety and control.
  • Set your taper angle by degree or rise and run for last cutting.
Check Stock

Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand..
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common..
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence..
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks..
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instru....
Check Stock

NewkeepsR 18G 1.0mm 316L Steel Calor Style Taper Insertion Pin for Ear/Nose/Eyebrow Stretcher Body Piercing Stretching Kit Assistant Tool

  • Size: 18ga(1.0mm),2.0 inches length (50mm). The large end is hollow( "No Thread Inside" will NOT screw onto your externally threaded jewelry,Just....
  • Function:① Stretch/enlarge hole for gauge modification purpose,gauge up size from 20g to 18g.(Used some alcohol during this process) ② Used for....
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into....
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time....
  • Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the size that suits you best..
Check Stock

NewkeepsR 2PCS-16G(1.2mm) 316L Steel Calor Style Taper Insertion Pin for Ear/Nose/Navel/Nipple/Lip/Eyebrow Stretcher, Body Piercing Stretching Kit Assistant Tool

  • ... helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 18g to 16g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk a bit or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time to adjust. ③ Can be autoclaved and reused as steel taper more comfortable and durable.④ Why no thread inside the hole? as your external thread bar isn't made from our shop,I'm not sure if both end threads match,so holding bar will be better..
  • 316L Implant Grade Stainless Steel Material. Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the size that suits you best..
Check Stock

NewkeepsR 2PCS-14G 1.6mm 316L Steel Calor Style Taper Insertion Pin for Ear/Navel/Nipple/Lip/Tongue Stretcher Body Piercing Stretching Kit Assistant Tool

  • ... helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 16g to 14g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk "a bit" or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time to adjust. ③ Can be autoclaved and reused as steel taper more comfortable and durable.④ Why no thread inside the hole? as your external thread bar isn't made from our shop,I'm not sure if both end threads match,so holding bar will be better. ⑤ Can't fit to any threadless piercing jewelry..
  • 316L Implant Grade Stainless Steel Material. Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the siz....
Check Stock

Painful Pleasures Threaded Taper for Ears Piercing and Stretching Kit For Navel Nose and Other Areas Medical Grade Stainless Steel 1 Inch Long 1.2mm at Thickest Point 16g

  • MADE FROM STAINLESS STEEL - This threaded taper is made from polished, 316L ASTM F-138 Implant-Grade Stainless Steel. This helps to prevent irritation and can be easily cleaned..
  • SINGLE OR MULTIPLE USE - Sold individually. These ear tapers can be autoclaved for multiple insertions or disposed of after a single use. Each one is sealed and wrapped..
  • TAPER SIZE - Measures 1-inch long and 1.2mm at its thickest point. The taper gauge offers internal threading of 0.9mm. Can be used on navel, nipple, and other areas..
  • FOR THREADLESS OR INTERNALLY THREADED JEWELRY - Use the pin hand taper for a hassle-free install of 16g threadless or internally threaded jewelry in one, swift motion..
  • VERSATILE - Ideal to use as a piercing and ear stretching kit. Or to stretch out and change jewelry in existing nose piercings, nipple piercings, belly piercings, lip piercings and eyebrow piercings..
Check Stock

Beslands Dial Indicator Bore Gage Gauge, Stem Length 6'', Cylinder Dial Bore Gage with Carbide anvils (2\-6\ Range)

  • Dial indicator includes jewel bearing, including ABS storage box.
  • Ultra-precision bore gauge The deep bore gauge with a depth of 10 inches allows users to measure out-of-round conditions and cylinder taper without having to disassemble the piston-this gauge can reach critical wear areas of the cylinder block..
Check Stock

Body Candy Womens Ear Plug Gauges Organic Hand Carved Wood Nautical Anchor Hanger Plugs Stretched Ears 2G

  • Curved taper features a nautical anchor shape.
  • Sold as a set of 2 hand carved wooden nautical anchor ear plugs.
Check Stock

Painful Pleasures Threaded Taper for Ears, Piercing and Stretching Kit For Navel, Nose, and Other Areas, Medical Grade Stainless Steel, 1 Inch Long, 1.2mm at Thickest Point, 16g with 0.8mm Threading

  • MADE FROM STAINLESS STEEL - This threaded taper is made from polished, 316L ASTM F-138 Implant-Grade Stainless Steel. This helps to prevent irritation and can be easily cleaned..
  • AUTOCLAVE SAFE - These ear tapers can be autoclaved for multiple insertions or disposed of after a single use. Add 1” piercing needles to pierce and install internal jewelry in one motion..
  • TAPER SIZE - Measures 1-inch long and 1.2mm at its thickest point. The taper gauge has a 0.8mm x 2.0mm thread on the end and offers internal threading of 0.8mm. Use on navel, nose, and other areas..
  • FOR INTERNALLY THREADED JEWELRY - Use the hand taper to install 0.8mm thread pattern jewelry. Our bent and circular 16g internal is 0.8mm threading. Not suitable for 0.9mm Labrets and Straights..
  • VERSATILE - Ideal to use as a piercing and ear stretching kit. Or to stretch out and change jewelry in existing nose piercings, nipple piercings, belly piercings, lip piercings and eyebrow piercings..
Check Stock