Gates 1310 1.1/4 Taper-Lock Bushing, 1-1/4\ Bore, 1.0\ Length, 1.3\ Max Bore
- For use with Taper-Lock sheaves, sprockets and pulleys (not included).
- Carbon steel for strength and resistance to wear.
- Allows precise selection of number of drive teeth or grooves in adjustable speed applications.
Check StockGates SS 1108 .3/4 Taper-Lock Stainless Steel Bushing, 3/4\ Bore, 0.8\ Length, 1.1\ Max Bore
- For use with Taper-Lock sheaves, sprockets and pulleys (not included).
- Stainless steel for strength and resistance to corrosion.
- Allows precise selection of number of drive teeth or grooves in adjustable speed applications.
Check StockGates 2012 1.15/16 Taper-Lock Bushing with Shallow Keyway, 1-15/16\ Bore, 1.2\ Length, 2.0\ Max Bore
- For use with Taper-Lock sheaves, sprockets and pulleys (not included).
- Carbon steel for strength and resistance to wear.
- Allows precise selection of number of drive teeth or grooves in adjustable speed applications.
Check StockPETZL - OK, Climbing Carabiner for Pulleys and Ascenders, Screw Lock
- INTENDED USE: The OK carabiner is optimal for loading devices with a wide section such as pulleys, ascenders, and progress capture pulleys..
- SIZE AND STRENGTH: This midsize carabiner (22 mm gate) has a major axis strength of 25 kN..
- EASY TO USE: The H-shaped profile is designed to offer a better grip with gloves on and the fluid, oval-shaped interior limits the risk of a catch point and allows for easy rotation..
- LOCKING SYSTEMS: Choose between three locking systems: Screw-Lock for occasional use or dirty environments, Triact-Lock for frequent manipulation, or Ball-Lock for frequent manipulation with the added benefit of a lock indicator..
- NO MORE SNAGGING: Petzl's Keylock system helps avoid accidentally snagging your carabiner on your gear..
Check StockGarage Door Extension Spring Pulley Sheave Kit +SAFETY CABLES & INSTRUCTIONS (1set）
- Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
- PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
- INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
- INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check StockGarage Door Extension Spring 27x48x220 for 8' High Doors 220LB Green (Qty 2)
- Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
- PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
- INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
- INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check StockTB Woods 2517 TL25171 Taper Lock Bushing, Cast Iron, Inch, 1\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 3020 TL302050MM Taper Lock Bushing, Cast Iron, 50 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL2517138 Taper Lock Bushing, Cast Iron, Inch, 1.375\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1008 TL100858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1108 TL110822MM Taper Lock Bushing, Cast Iron, 22 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL251758 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL2517238 Taper Lock Bushing, Cast Iron, Inch, 2.375\ Bore, 1200 lbs/in Torque, Standard Design, Shallow Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check Stock
