Categories

Best Taper Shank Drill Chucks

IRWIN Drill Bit, 3-Cutter, Self Feed, 2-Inch (3046010)

  • Drill bits have 3 cutting edges that are hardened for durability and long life in tough materials.
  • Replaceable screw-point tip pulls the drill bit fast for clean, true holes.
  • 7/16-inch hex quick-change impact shank reduces slipping in standard chucks.
  • IRWIN drill bits are compatible with most 7/16-inch impact drills.
Check Stock

IRWIN SPEEDBOR Tri Flute Wood Drill Bit 1/2' X 6'(3041001)

  • IRWIN SPEEDBOR drill bits use a tri-flute design for faster chip ejection and less binding.
  • This 1/2-inch drill bit has cutting spurs with 3 cutting edges for faster, cleaner holes.
  • A full screw tip allows the drill bit to self-feed for ease of drilling.
  • The grooved hex shank helps prevent slipping in the drill chuck or bit extension.
  • Fits virtually any standard 1/4-inch quick-change chucks, including impact drills.
  • A fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection.
  • Fits all standard 1/4-inch quick change chucks.
  • Full screw tip allows the bit to self feed.
Check Stock

LANTRO JS MT1 to MT2 Morse Taper Drill, Taper Drill Sleeve Reducing Adapter for Lathe Milling Industrial Supplies

  • MATERIAL: The taper drill sleeve is made of high-quality high-speed steel, which is hard and not easy to break, bringing you a better experience.
  • QUENCHING: The product has been quenched as a whole, which has higher hardness and wear resistance.
  • POLISHING: The taper bit sleeve is finely polished, and the excellent surface treatment makes it easier to use.
  • APPLICATION: The drill sleeve is specially designed for the use of Morse taper shank and taper shank drill bits.
  • PACKAGE INCLUDED: 1pc MT1‑MT2 Morse Taper Adapter.
Check Stock

Gizhome 13Pcs of M35 Cobalt Drill Bit Set Steel Extremely Heat Resistant Metric Drill Bits with Straight Shank to Cut Through Hard Metals

  • Manufactured from High Speed Steel Twist Drill Straight Shank Cobalt Twist Drill Hand Drill Hole Drill Set.
  • No center punch is needed - the 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander".
  • must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
  • Material: Drilling Steel, Stainless Steel, Metal and Iron. Particularly successful in cutting through wood, rubber, bamboo and plastic. DO NOT suggest to cut hard metals such as hard metal ,stainless steel and cast iron.
  • Package: Includes 13pcs of steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm.
Check Stock

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

3PCS 1/4 Inch Hex Shank Keyless Drill Chuck, Quick Change Adapter Converter Impact Drills Bits, Electric Tool Accessories (0.3-3.6mm/0.3-6.5mm)

  • [Package Included]: 3PCS 1/4inch hex shank keyless drill chuck, include 1X 0.3mm-3.6mm drill chuck, and 2X 0.3mm*6.5mm dill chucks. Easy to use and install, fast, convenient and safe, it is an essential power tool accessory in daily life..
  • [Quik Change Adapter Converter]: Keyless design allows one to easily and quickly swap bits and wires, easy to load and unload. Can quickly switch tasks and maintain work progress, which simplified all your tasks. Hexadecimal drive power tools are allowed to be applied with most drill bits..
  • [Strict Quality Control]: Our mini adaptor drill chuck manufactured under strict quality control. Made of high qualitity metal meterial. Durable, well-made, they are good enough for most jobs. Small size and light weight, will not bring additional burden to the operation.
  • [Keyless Drill Chucks Design]: Keyless drill chucks can easily turn a cordless electric screwdriver into a drill or grinder.
  • Can be easily to adjusted to quickly switch tasks and maintain work progress. They are essential power tool accessories..
  • [Wide usage]: These drill chucks' specifications are 0.3mm-3.6mm/0.3mm-6.5mm, which suitable for most drills and cordless power screwdrivers. For repairers, model makers, DIY enthusiasts,It is an ideal tool to use in garag....
Check Stock

Irwin Tools 3046002 Speedbor MAX Self-Feed Wood Bit Extension, 12\ , Black

  • Adds 12 inches to SPEEDBOR Max Self-Feed wood drilling bits..
  • Forged in one piece from high carbon steel for maximum strength under tough drilling conditions..
  • Precision-milled shank eliminates run-out and wobble..
  • Drill bits have 3 cutting edges that are hardened for durability and long life in tough materials.
  • Drill bits feature replaceable screw-point tips that pull the drill bit fast for clean, true holes.
  • 7/16-inch hex impact shank reduces slipping in standard chucks.
  • IRWIN drill bit extension is compatible with most 7/16-inch impact drills.
Check Stock

LANTRO JS MT5 to MT2 Morse Taper Drill, Hardness Wear Resistance Taper Drill Sleeve Reducing Adapter for Lathe Milling

  • MATERIAL: The taper drill sleeve is made of high-quality high-speed steel, which is hard and not easy to break, bringing you a better experience.
  • SPECIFICATIONS: Accuracy: 0.015mm, Hardness: 50 HRC.
  • QUENCHING: The product has been quenched as a whole, which has higher hardness and wear resistance.
  • APPLICATION: The drill sleeve is specially designed for the use of Morse taper shank and taper shank drill bits.
  • QUALITY INSPECTION: Each product has been strictly tested before leaving the factory, and rejects defective products.
Check Stock

NEIKO 10197A Step Drill Bit Set 5 Pc Step Bit for Metal 50 SAE Sizes Total 1/8” – 1-3/8” SAE Titanium High Speed Steel Unibit Stepper Cone Drill Bit Two Flute Step Down Bits Step Up Drill Bits

  • HSS STEP BIT: Classic step drill bit set constructed of high-speed steel for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • MULTIPLE HOLE DRILL BIT: This versatile unibit step drill bit cone bit can replace 50 individual drill bits for metal with just 5 pieces in one box. Drill a range of different sizes and holes with a single bit without needing to change between bits..
  • STEP DRILL BIT SET INCLUDES: Four multipurpose metal dill bit in 1/4-inch shank and 3/8-inch shank and a red blow mold carrying case for easy convenience and storage in your car, garage or shop..
  • 50 SIZES IN 1: 5 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 9 step bit (3/8” shank.
  • 1/4" to 3/4"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

Flexible Drill Bit Extension Set, Includes 105° Right Angle Drill, Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, 3pcs Drill Bit Holder, Screwdriver Bit Kit

  • 【Complete Collocation】Package included 1pcs bendable drill bit extension, 1pcs 105° right angle drill extension, 3pcs 1/4 3/8 1/2" universal socket adapter set, 3pcs Drill Bit Holders, 10pcs screwdriver bit set. These extension kit work great, when you have limited access..
  • 【1/4" 105° Right Angle Drill Attachment】105° Angle 1/4 inch Hex Drill Bit Screwdriver Socket Holder Adaptor,which is quick change compatible and fits most power drill, rechargeable drill, manual wrench and driver chucks..
  • 【Impact Driver Bit Set】1/4 Hex Shank Socket Adapter Impact Set Square Nut Driver Drill Bit 1/4" 3/8" 1/2" ,connect to the standard hex nut drivers, impact hole saws, spade bits and more..
  • 【Drill Bit Holders】1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • 【Flexible Shaft Drill Bit Extension】Length: 29cm/11.42" (Approx.).
  • Features: for Electronic Drill, Connecting Link, Flexible..
Check Stock

Mini Center Finder With 1/4 Diameter X 7/8 Long Shank

  • Finally! A round stock center finder that fits Our Line of Micro Mark Precision Drill Presses..
  • Special Indicator Locates Drill Chucks Exactly On Center.
  • Never drill off-center holes again...use our Center Finder to quickly and easily position your drill press chuck directly above the exact center of a....
  • And this smaller version of our 3/8” shank finder is 50% smaller in length so it makes small length drill bits able to reach the object to be....
Check Stock

TRUPER BC-12M 12 Professional Bit Brace

  • DIMENSIONS - Include 1pc 15/64 inch(#6) countersink with 3/32 inch twist drill, 1pc 5/16 inch(#8) countersink with 7/64 inch twist drill, 1pc 3/8....
  • APPLICATION - Ideal for wood, plastic, drywall etc.Suitable for bench drill, hand drill and conventional electric drill. The item is not “Impact....
  • MATERIAL - Made of high carbon steel material, high hardness and durable..
  • FEATURES - Two side application, one is drill and the other one is screw bits. Up to 3 Times Faster and More Efficient than Standard Drilling &....
  • Ideal for plugs or dowel buttons, the 1/4" hex shank can be used with power drills and quick-change chucks.
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, 4-Piece (DW5204)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Three flats on shank eliminate bit slipping in chuck.
  • Innovative tip reduces walking and increases accuracy.
  • Used primarily to drill holes for mechanical anchors, fits standard 3/8-inch and 1/2-inch chucks.
Check Stock