Categories

Best Taper Shank Slotting Cutters

Freud 60-102 Slotting Cutter Arbor with 1/2 Shank

  • Specs: Arbor Dia. 5/16", Arbor Height 25/64", Bore Dia. 2-3/8", Shank Dia. 1/2", Stud Height 1".
  • The perfect complement to Freud's Slotting Cutters.
  • Compatible with any slotting cutter with a 5/16" bore.
  • Use in hand-held or table-mounted routers.
Check Stock

BOSCH 92813C 5/16 In Arbor for Slotting Cutters

  • Compatible with cutters 85526M, 85527M, 85528M, 88829M, and 92837.
  • Recommended for use with a routing guide.
  • May be used with router table for production work.
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 1-1/2” Dia 2+2 Carbide Inserts Slab Flattening Router bit Cutter Planing Bit Woodworking Milling Cutter

  • SIZE: The wood router bit shank 12.7mm（1/2"）.
  • Carbide Inserts: above part 14*14*2 mm(≈ 5/9*5/9*2/25"), 2+2 Insert Design.
  • Professional Spoilboard Surfacing Router Bit,not only can it be used for wood slab flattening.It can also be used for slotting/grooving..
  • UPGRADE:Compared with ordinary milling cutters, this cutter can be replaced with carbide insert.This is more suitable for professional woodworkers..
  • Surface bit cutting applications of Industrial Spoilboard, Rabbeting, Flycutter, Leveler, Surface Planer and Bed Insert Router include spoilboard, large surface planing and trapping on MDF, Balsa Core, hardwood, softwood and all artificial materials.
  • This professional 2+2 wood milling cutter 1/2" Shank Has better bottom clearing effect,finer surface finish and better clearance for 90° angles..
Check Stock

Whiteside 6700A Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing by Whiteside

  • Whiteside Slotting Cutter 6700A: 5/16"B, 0.062"CL, 3-WING.
  • Slotting cutters create a small slot in your project for various uses..
  • Made from solid alloy steel and micro-grain carbide..
  • Precision ground for proper balance at high RPM..
  • 6700A Whiteside Carbide Tipped Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing.
Check Stock

SpeTool 1/2\ CNC Spoilboard Surfacing Router Bits 4 Flutes 2\ Cutting Diameter Flattening Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • Precise, smooth, no burr edges - Tungsten steel tipped cutters are sharp enough, to slice smoothly into stock producing clean, splinter free..
  • Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
  • Suitable for woodworking engraving machine, trimming machine and more, using for hand making a drawer or other woodworking.
Check Stock

Annular Cutter JESTUOUS 3/4 Inch Weldon Shank 1-1/2 Cutting Diameter 2 Cutting Depth with Two-Flat HSS Kit for Magnetic Drill Press,1 Piece

  • 1 inch cutting depth, 8 pc Annular Cutter set.
  • Incudes 2 pcs pilot pins and 6 pcs Annular cutters.
  • Cutter diameter of each cutter: 7/16'', 9/16'', 11/16'', 13/16'', 15/16'', and 1-1/16'.
  • Pilot Pin Size:1/4" x 3" (overall length).
  • Cuts holes in steel accurately, quickly & safely.
  • Large holes can be drilled up to ten times faster than regular drills bits.
  • Make overlapping holes, slotting holes and edge cuts.
  • Machine-finish hole-no reaming needed when used with lubricant.
Check Stock

CNC Spoilboard Surfacing Router Bits,1/4 inch Shank 1inch Cutting Diameter plus 1/2 inch Shank 2inch Cutting Diameter , Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Perfectly forSurfacing, Rabbeting, Flycutter, Leveler, Surface Planer(Carbide) 2 pieces

  • ...mpact panels, laminate, acrylic and etc.it can easily cut the groove you want.Do not cut various metals and non-wood materials such as: steel, iron, sand, etc.This bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving.
  • [Perfect fit]Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc. Our slotting knives can easily fit most devices on the market, so you don’t need to worry about fit.Perfect choice of professionals and hobbies. PLEASE CHECK IF IT IS THE SIZE AND SPECIFICATION YOU WANT BEFORE PLACING THE ORDER..
  • [Perfect service] The support is not satisfied with the 100% refund service. If you have other questions, please contact us, and we will give you the perfect solution as soon as possible.[Perfect service] The support is not satisfied with the 100% refund service. If you have other questions, please contact us, and we will give you the perfect solution as soon as possible..
Check Stock

8pcs Carbon Steel Wood Plug Cutter Set,1/4” 3/8” 1/2” 5/8” Barrel Cork Tenon Hole Saw Cutting Tool Drill Bit for Woodworking

  • Wood plug cutter drill bit set: 8pcs wood plug cutter set include 4 standard plug cutters and 4 four-tooth chamfered cutters..
  • More Durable: Wood plug cutter set, diameter sizes include 5/8",1/2",3/8",1/4" (16mm/12.7mm/10mm/6mm), shank diameter: 0.37in/9.4mm..
  • High Quality Material: Straight and tapered taper cutting tool is made of high-carbon steel (45#)..
  • Wide Range of Applications: Can be used with bench drill and hand drill, for easy center, please use bench drill. Please note: it is easy to get burnt when it is running too fast..
  • Good After-sales Service: LYHLYA aim to provide good products and services for our customers. We have good and reasonable return policies. Do not hesitate to contact us if you need any help or have any question, we will be very happy to give you a satisfied solution in time..
Check Stock

HSS 1-1/4\ MT3 Taper Shank Drill

  • Size: 42.00mm, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/8, Overall Length: 17-1/8, Shank Size: 5MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 7/8\ HSS 3MT Taper Shank Drill Bit, DWDTS7/8

  • Size: 3/4, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 5-7/8, Overall Length: 9-3/4, Shank Size: 2MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock