Categories

Best Tapered Ball End Mill

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5Pc/Pack Tapered Cone 1/8 End Mills 0.5MM Cutting Radius 1.0mm Diameter 3D Wood Engrave CNC Router Bits Tools

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus 0.5MM, Flute Length:15MM, Overall Length: 1-1/2Inch, Single Side Angle 4.16°.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8 Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

Stainless Steel Food Mill with 3-Grinding Sizes, Dishwasher Safe

  • ...iscs for preparing foods of fine, medium and coarse textures. Fine disks work well for jellies, baby food, and sauces, medium for applesauce and vegetable soups, and coarse for chunky sauces and mashed potatoes. Spring-loaded lever with a suitable tension for easy disc exchange and assemble.
  • Non-Slip Hanldes & Round Ball: Stainless steel bowl with 2 non-slip handles allow you to place on a pot or a bowl, preventing staining and easily holds hot foods. Hand crank has a super soft rounded ball on the end of the handle, making it easy to hold and move the crank.
  • How To Use: Place food in the mill and keep rotating the handle clockwise to push food through the mill. When needed, reverse the rotation direction to reposition the food inside..
  • 100% Satisfaction: our convenient and easy-to-clean Stainless Steel kitchen mill is backed by our unconditional 30-day money back. If you are not 100% thrilled with your prograde food mill, we will offer you a full refund on the spot..
Check Stock

5PCS R0.5-3mm Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool End Mill Set Includes 5 Radius Sizes Of 0.5mm 1mm 1.5mm 2mm 3mm

  • Applicable Materials: ball mill bit usually used for steel（Carbon steel/Alloy steel/Hardened steel/Cast lron, etc.）.
  • Ball End Mill Specification -- Cutting Diameter: 1 - 6MM（1mm 2mm 3mm 4mm 6mm），Shank Diameter:4 - 6MM（4mm 4mm 4mm 4mm 6mm），Cutting Length:2 - 12MM（2mm 4mm 6mm 8mm 12mm），Overall Length:50MM.
  • Wide Compatibility: ball nose end mill set are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
  • High Quality:made from solid tungsten carbide (TC)，have a Titanium Nitride (TiN) surface to improve heat resistance and reduce wear..
  • Used it strictly for steel, it worked great for that, eats metal fast ，beautiful surface finish!Watch your stick out and travel speeds..
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 4mm and 15mm Cutting Length Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated

  • Brand name: JERRAY / Tapered Ball Nose End Mill / Cone Cutters.
  • Flutes: 2 Flutes / Tip Radius:0.25mm ,0.5mm,0.75mm,1.0mm.
  • Per Side Angle =6.65° / 5.71° / 4.76° / 3.81°(Approx.) (B).
  • Shank Diameter: 4mm ((d1) / Cutting Length: 15mm(L1).
  • Overall Length: 50mm(L) / Material hardness:0~hrc55.
Check Stock

SpeTool Tapered Ball Nose Router Bit 1/4\ X 3\ with 1.0mm Tip Diameter（0.5mm Radius） Ball Nose End Mill 4.82Deg for CNC Machine Engraving Carving Bits Woodworking H-Si Coated

  • Tapered angle Ball Nose End Mill / Cone Cutters.
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated.
  • Tip Diamter: 1.0mm, Radius: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg.
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8 3.175mm Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated

  • Brand name: JERRAY / Tapered Ball Nose End Mill / Cone Cutters.
  • Flutes: 2 Flutes / Tip Radius:0.25mm ,0.5mm,0.75mm,1.0mm.
  • Per Side Angle =5.09° / 4.15° / 3.20° / 2.25°(Approx.) (B).
  • Shank Diameter: 3.175mm ((d1) / Cutting Length: 15mm(L1).
  • Overall Length: 40mm(L) / Material hardness:0~hrc55.
Check Stock

Malted Barley Grain Mill for Homebrew Beer by Brew-Control

  • Includes a 7.7LB Hopper, 2 Stainless 12 TPI knurled Stainless Steel rollers, 4 Ball Bearing, wooden base with locator feet and crank handle..
  • The mill end plates are made from tough 1/2" aluminum plate to prevent the Stainless Steel roller from spreading..
  • Although the mill gap is adjustable, our grain mill is set to the right gap to start crushing grain right out of the box..
  • Our mill ships with a crank handle but it's just as easily to run with a 3/8" or 1/2" battery powered or electric drill - just remove the handle..
  • The sturdy wooden base has three locator feet to securely center on a 5 or 6.5 gallon (11.8-13.8 inch in diameter) brew bucket..
Check Stock