Categories

Best Tapered Chuck Reamer

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

4Pcs Drill Bridge/Construction Reamer Bit Set 3/8 1/2 5/8 3/4 with 1/2 Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole with Aluminum Box

  • What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
  • Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
  • Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
  • Includes: 3/8" (fits 3/8'' shank collets), 1/2", 5/8" and 3/4" (fits 1/2'' shank collets).
  • Design: Tapered point design allows reamer bits to enter irregularly overlapping holes, aligning bolt holes.
  • three symmetrically placed flats on shank provide a secure grip for portable power and air tools.
Check Stock

Starrett 162A Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0-0.040\ (1mm) with Tapered Collet, Knurled Rings, Nickel Handle

  • FINGER ROTATING DESIGN: The Starrett 162 Pin Vise features small handles that allow you to rapidly rotate between thumb and finger when filing small work.
  • HOLDS UP TO 1 MM: This model pin vise securely holds workpieces up to 0.040" (1mm) in diameter, including small stock, taps, drills, reamers, scribers, wire, small files, and other tools.
  • PREMIUM HOLDING DEVICE: Knurled rings and handle provide a secure grip, and the nickel plated handle and binding nut offer last-lasting durability and wear-resistance.
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces.
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface Measurements are 1-11/16" handle length, 3/16" handle diameter, and 3-3/32" overall length with chuck closed.
Check Stock

Starrett 166C Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0.050 - 0.125\ (3.21mm) with Insulated Octagonal Handle for Shock Protection, Tapered Collet

  • NoN-ROLLING OCTAGON SHAPE: The Starrett 166C Pin Vise has an Octagon-shaped handle that prevents the tool from rolling when it’s set down..
  • HOLDS UP TO 3.2 MM: This model pin vise securely holds workpieces sized between 0.050" - 0.125" (1.3mm - 3.2mm), including small stock, taps, drills, reamers, scribers, wire, small files, and other tools..
  • SHOCK PROTECTION: This pin vise features an insulated PVC handle, which protects the user from electric shocks..
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces..
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface. Measurements are 2-5/32" handle length and 3-55/64" overall length with chuck closed..
Check Stock

YaeKoo 2 pcs Tapered Reamer T Handle 6 Fluted Chamfer Bridge Pin Hole Hand Held Reamer Sizes 1/8\-1/2\ (3-13mm) & 5''-5/8'' (5-16mm) Handle Drilling Tools

  • The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels.
  • The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort.
  • Reamer T handle for easy reaming.The removable handle facilitates compact storage..
  • Material of Taper Reamers: high carbon steel heat treatment, longer service life.
  • Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13mm) size and 1/5" -5/8 "(5mm -16mm) size.
Check Stock

ARB 10000011 Speedy Seal 2 - Universal Heavy Duty Tire Repair Kit For Car, Truck, RV, Jeep, ATV, Motorcycle, Tractor, Trailer. Flat Tire Puncture Repair Kit Fix Punctures and Plug Flats 50 String Plug

  • the ARB Speedy Seal II includes a premium spring steel insertion needle with cast handle, hardened steel reamer tool, 40 vulcanizing repair cords, lubricant, quality pliers, blade, spare valve cores, spare valve caps, allen key and a dual chuck pencil type tyre gauge to make checking your pressures a snap..
  • Includes a quality pencil type tire gauge, insertion and reamer tools, needle nose plyers, lubricant, additional valve accessories and 30 self vulcanizing repair cords.
  • Spare repair cords are also available in packs of 50 from ARB, so before you head out on your next 4x4 trip, make sure you've got all the necessary equipment for making emergency repairs.
  • Small Travel Cars, Universal Fitting, Fits Neatly into ARB Roller drawers – RF945, RF1045, RF1355.
Check Stock

Renekton 3/8” Drill Chuck with 1/4” Quick Change Hex Drive, Convert Impact Driver Hammer and Wrench to Drill

  • DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life..
  • HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank..
  • UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm..
  • INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor..
Check Stock

Machinery Repairman

  • ...perate either manually or with the adjustable auto feed rate. Emergency stop buttom included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works..
Check Stock

Hymnorq 1/2-20UNF Keyless Drill Chuck 2-13mm Clamping Range with SDS-plus Shank, 1/2 Socket Square Converter and 1/4 Inch Hex Shank, Fit Impact Hammer, Electric Wrench and Air Screwdriver

  • CONVINIENCE - Compared with keyed chucks, the keyless chucks can hold bits without additional tool, advoiding the inconvinience of keeping and finding a small chuck key.
  • DURABILITY - The chuck is high-precision threaded and tapered tightly with hard rust-resistant pp plastic body. The jaws, spings are made of premium steel alloy. All the extensions are applied with rust-proof finishing for extended service life..
  • WIDE COMPATIBILITY - This drill chuck adapter tool kit is suitable for gyro-screwdriver, wireless screwdriver, impact screwdriver, impact wrench, hammer drill and some angular polishing machines of most brands on the market like Dewalt, Bosch, Dremel, Kobalt, Milwaukee, etc..
Check Stock

BestEquip Metal Lathe 7\ x 14\

  • ...The hardness and accuracy of the v-slide ways are obtained by raw material, heat hardening and grinding. Emergency stop button included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Back splash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004" / 0.01 mm..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works..
Check Stock

VEVOR Metal Lathe 7\x12\

  • .... The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works..
Check Stock

Drill America 7/8 Bridge/Construction Reamer with Magnetic Hex Shank DWR Series

  • Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
  • Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
  • Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.
Check Stock