5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

PAGOW T Handle Taper Reamer, 5-16mm Tapered 6 Hand Held Fluted Chamfer Reaming, Repairman's Bridge Pin Hole Reamer Woodworker Cutting Tools

  • Material: Made of hardened ball bearing steel (#9027) with precision ground cutting edges..
  • Tapered Reamer Diameter:1/8"-1/2"(3-13mm).
  • T-Handle Grip: Provides greater leverage and easier reaming. Provides leverage for easier operation and rotation,saving effort. Removable handle for compact storage..
  • Perfect tool kit for every DIY users to enlarge holes in wood. Suitable for reaming taper holes on wooden boards,chamfering,deburring,easy to screw counterbore..
  • Precision machined cutting edges smooth metal surfaces with little effort. Useful tool for removing burrs from steel, brass, aluminum, plastic, wood and wallboard..
Check Stock

Zak Designs 0204-9035 Citrus Melamine, 3.5" by 3.5", Kiwi Reamer

  • GREAT EVERYDAY KITCHEN ITEM:This Zak Designs citrus reamer is great for everyday use in the kitchen..
  • SAFE MATERIAL:This citrus reamer is made of 100% melamine material that is durable and long-lasting. It is BPA-free as well as dishwasher safe.
  • SAVE PREP TIME: The fruit reamer juices fruits quickly and efficiently, with a comfortably rounded handle and a sharp point to easily remove seeds..
  • DIY TOOL:This citrus reamer is great for lemons, limes, and other fruits when the store-bought juice just doesn’t cut it..
  • FUNCTIONAL SIZE:This citrus fruit reamer has a functional size that puts a fresh twist on making your own lemon juice! Dimensions (LxWxH): 3. 5in x 3. 5in x 7. 25in..
Check Stock

Stone Carved Whale Hand Pipe - 4 / Assorted Colors

  • Made of Stainless Steel and Rosewood, The tobacco pipe cleaner cleaning Tool has elegant and classic look , easy to use and very practical. Excellent....
  • 3 in 1 Tamper, Reamer & Pick tool set, Prefect for cleaning & removing ash & other residue in the stem and shank as well as the bowl chamber..
  • Easy to use , durable, light weight and easy to carry. Weight: 1.25oz/35.44g..
  • Compact size,Portable, Overall Size: 3.31" (L) x 0.69" (W) x 0.25" (T)..
  • Package:1* (3 in 1)Tamper, Reamer & Pick tool set.
Check Stock

4Pcs Drill Bridge/Construction Reamer Bit Set 3/8 1/2 5/8 3/4 with 1/2 Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole with Aluminum Box

  • What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
  • Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
  • Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
  • Includes: 3/8" (fits 3/8'' shank collets), 1/2", 5/8" and 3/4" (fits 1/2'' shank collets).
  • Design: Tapered point design allows reamer bits to enter irregularly overlapping holes, aligning bolt holes.
  • three symmetrically placed flats on shank provide a secure grip for portable power and air tools.
Check Stock

Taper Shank Milling Cutting Tool, Machine Reamer Precise Grinding Grooves 6 Blades Cemented Carbide for Stainless Steel

  • Universal Shank Type: This is reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Integral One Time Forming: This integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Wide Application: This is reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

Joyoldelf Portable Smoking Pipe Cleaning Tool – Stainless Steel 3-in-1 Scraper & Reamer, Bonus a Flannelette Pipe Pouch, Perfect for Scraping and Poking

  • ...nless steel material, including three parts, tamper, scraper, needle. Tamper use for loading of tobacco, tobacco flatten to help tobacco combustion, scraper use for scraping the inside of the pipe tobacco dust and soot, needle use for picking out soot for cleaning pipelines to prevent clogging..
  • Stainless Steel Pipe Reamer – Pipe reamer is well made of stainless steel material, perfect for reaming the bowl when cake becomes too thick, making scrape off some cake more evenly and more conveniently than normal blunt tool, to avoid affect the smoking taste..
  • Pipe Pouch – Bonus a flannelette pipe pouch, easy for storing pipe and pipe accessories, you can carry them go outside, very convenient, and can avoid missing some pipe tool and accessories..
  • Package and Joyoldelf Full Warranty – You’ll get 1 x Stainless Steel Pipe Reamer, 1 x Stainless Steel 3-in-1 Pipe Scraper, 1 x Pipe Pouch. We will offer you one year warranty and lifetime customer service, our warranties ensure you have a fantastic shopping experience!.
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock