Categories

Best Tapered Shank Reamer

Drill America 15/16\ Bridge/Construction Reamer with Magnetic Hex Shank and Black and Gold Finish, KFD Series

  • Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation. Black and gold Killer Force (KFD) hex shank bridge reamers are manufactured from premium grade high speed steel..
  • Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
  • Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

Viking Drill and Tool 12270 CR-4SP 4 piece Set Type 50-UB Standard Flute Magnum Super Premium Car Reamer

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

HOUNDSBAY Bulldog Heavy-Duty Shoe Stretcher for Women | Loosens Tight Shoes with Strong Wood & Metal Construction Women’s Small / 3.5-5.5 US

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

Taper Shank Milling Cutting Tool, Machine Reamer Precise Grinding Grooves 6 Blades Cemented Carbide for Stainless Steel

  • Universal Shank Type: This is reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Integral One Time Forming: This integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Wide Application: This is reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
Check Stock

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

  • [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
  • [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
  • [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
  • [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
  • [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..
Check Stock

Machine Reamer, Carbide Taper Shank Milling Cutting Tool High Grinding Accuracy for Cast Iron

  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
Check Stock

Taper Shank Milling Cutting Tool, Lathe Machine Reamer High Grinding Accuracy Flexible Carbide for Stainless Steel

  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
Check Stock

Taper Shank Milling Cutting Tool, High Grinding Accuracy Flexible Lathe Machine Reamer Refined Grooves for Cast Iron

  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

High Precision Industrial Grade Spiral Reamer 1:10 Hss Steel, Conical Handle Hinge Hinged Die Processing Tool 8 X 12 X 40mm

  • Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
  • Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
  • Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
  • Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
  • Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock