Categories

Best Tapered Stainless Steel Shims

StewMac Neck Shims for Guitar Shaped - 6 Pack of 0.50 Degree Shims

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 6 (six) 0.5-degree hard maple shims.
  • this taper works great on Fender and many other solidbody guitars.
Check Stock

HuthBrother Injector Tune Up SHIM Kit Fits 1994-2003 7.3L powerStroke Diesel Engines (NO TOOLS)

  • ★【Package includes】–TEN .004″ thick special stainless steel washers. (TWO TO BE INSTALLED UNDER THE ARMATURE PLATE TO INCREASE THE CLEARANCE to .004″.
  • ★【Package includes】–FORTY .002″ and FORTY .003″ stainless steel SOLENOID SPACER SHIMS. One of each placed under all four corners of the coil (for a total .005″) to increase the SOLENOID to armature clearance, when SOLENOID is energized..
  • ★【Package includes】–STEP BY STEP INSTRUCTIONS WITH PICTURES to install the two .004″ armature shims and INSTALL the .002″ and .003″ SOLENOID SPACER SHIMS (total .005″) and tips on thing to check with the valve cover off..
  • ★【 Fits Following 】–Kit Works on most HEUI injectors.
  • 1994 – 2003 7.3L PowerStroke, International T444E / DT466e / 1530E . Also works on Cat 3126B top solenoid , International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors..
  • ★【After-Sales Service 】–Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..
Check Stock

12 Pieces 304 Stainless Steel Strips Stainless Steel Shim Stock Assortment 1 Width x 6 Length 0.001 0.0015 0.002 0.003 0.004 0.005 Thickness Metal Shims

  • ✔ 304 stainless steel strips are made of premium 304 stainless steel which has excellent rust & corrosion resistance performance and widely loved by people..
  • ✔ Stainless steel shims are bendable, smooth surface without burrs, can be machined or cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ With 6 popular thicknesses to meet your various needs, 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005" thickness,6" length x 1" width, 2 pieces for each thickness..
  • ✔ Stainless steel shim stock widely used in all kinds of gaskets,mechanical parts,electronic components,metal stamping parts,chemical equipment,machine repair and maintenance,precision machinery,and so on..
  • ✔ Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

StewMac Neck Shims for Guitar Shaped - 6 Pack of 0.25 Degree Shims

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 6 (six) 0.25-degree hard maple shims.
  • this taper offers the most versatility - stacking them will let you really dial in the neck angle....
Check Stock

HHIP 2006-1046 1/2 Inch D HSS Keyway Broach with 3 Shims

  • Broach is tapered and Ground with bright finishing. Tolerances .5006.5016.
Check Stock

HHIP 2006-1018 1/8 Inch B HSS Keyway Broach with 1 Shim

  • Broach is tapered and Ground with bright finishing. Tolerances .1252.1262.
Check Stock

HHIP 2006-1024 3/16 Inch C HSS Keyway Broach with 1 Shim

  • Broach is tapered and Ground with bright finishing. Tolerances .1877.1887.
Check Stock

HHIP 2006-1022 3/16 Inch B HSS Keyway Broach with 1 Shim

  • Broach is tapered and Ground with bright finishing. Tolerances .1877.1887.
Check Stock

StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Shaped, Set of 3

  • Used to change the angle of a bolt-on bass neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper.
Check Stock

StewMac Guitar Neck Shims for Bolt-on Necks Made of Solid Maple Blank Set of 3

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper.
Check Stock

12 Pcs 304 Stainless Steel Strips Sheet Shim Metal Shim Stock Gap Filler Trim Strip for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 1x 6 Inch

  • Sturdy Material: our shim sheet is made of 304 stainless steel material, rust and corrosion resistant, sturdy and strong, not easy to break or fade, so you can buy and use it with confidence.
  • Convenient in Daily Life: these stainless steel strips are bendable that they allow you to machine or cut into various parts, like washers, metal shims, spacers and so on.
  • Also, you can DIY crafts according to your imagination.
  • Size Information: these stainless steel shims measure about 152.4 x 25.4 mm/ 6 x 1 inches, featuring various kinds of thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
  • Ample Quantity to Meet Your Demand: you will receive 12 pieces of stainless steel sheets in total, which are enough to satisfy your various uses and replacements, 6 different thickness, 2 for each thickness.
  • Applicable Occasions: these stainless steel metal strips can be widely applied for precision machinery, electronic equipment, processing equipment, mechanical parts, stamping parts, hardware manufacturing and so on.
Check Stock

01 Rv Pedestal Table Leg, Detachable Table Legs Aluminum Alloy Removable for Rv Marine Boat for Yachts Motorhome

  • LANDSCAPING LEVELER: Whether its a DIY project for your yard or you're a professional landscaper, our heavy duty shims can handle any size project! Use our BigGap Wobble Wedges to secure landscape stones and pavers and level concrete blocks..
  • MADE IN USA - MODULAR DESIGN: Precision engineered tapered leveling plastic shims feature interlocking ridges for a non-slip grip on both sides. You can securely stack these spacers with standard and mini Wobble Wedges to fit and level any space. These rigid plastic shims do not shrink or swell with temperature change..
Check Stock

Wobble Wedges Flexible Plastic Shims, 75 Pack - Multi-Purpose Wedges for Home Improvement and Workplace - The Ideal Table Shims, Toilet Shims, and Furniture Levelers - White Wedges

  • sturdy enough to last a lifetime and flexible enough to protect delicate surfaces & bend without breaking.
  • Wobble Wedges are far more than just tapered shims.
  • flexes to homeowners’ needs with a customizable form factor and modular design.
  • fix things around the house like a professional.
  • discreetly stabilize uneven bases of any size or shape with flexible, rubber-like material to absorb vibrations and silence shakes.
  • restaurant and cafe owners can fix wobbly tables, level large kitchen equipment, and stabilize table umbrellas.
  • all sizes can be used independently or stacked together in any combination or orientation to level, tilt, lift, twist, tighten, align, separate, cushion, bend, protect or silence.
  • rubber like material won’t scratch delicate surfaces and is easily trimmable with scissors or a knife.
  • they’re an incredibly versatile tool that makes any shimming, clamping, adjusting, leveling and installation job easier, faster, and more precise.
  • Modular system of precision engineered, securely stackable, non-slip, tapered leveling plastic shims made in the USA.
  • each wedge can be stacked with others or used independently.
  • our standard size wedge is roughly 1.92″ x 1.11″ x .25″....
Check Stock