Categories

Best Tapping Center

Qualtech 25/32\ HSS 2MT Taper Shank Drill Bit, DWDTS25/32

  • Durable Material: This M6 taper drill with high hardness, anti‑rust, strong and durable for a long term use..
  • Self‑centering Design: This hex handle tap drill bits has self‑centering point, no need for auxiliary center drilling or center punching..
  • Save Time: This taper drill can drilling chamfering and tapping at the same time, one‑step processing, greatly saves processing steps and time costs, and improves work efficiency..
  • Widely Application: This hexagonal handle compound tap drill bits is suitable for drilling, tapping and cutting of soft metals, aluminum plates, iron, etc..
  • Accurate: This hex shank drill with accurate ground point, flutes, body, clearance, and drill diameters for the best accuracy and performance..
Check Stock

SNUSIM 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping Metric Thread HSS 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

  • HIGH QUALITYH - These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 6 STEEL DRILLS - suitable for drilling wood, plastic, fine copper, aluminum and other soft metals (5-6 mm), not for hard materials (eg steel sheet).
  • SUITABLE - Using for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
  • SELF-CENTERING POINT - do not need assistant center drilling or center punching.Anti-wear: The back of the cone over the faucet to prevent excessive drilling caused by thread damage.
  • MORE EFFICIENT - Drilling and tapping in one, one-step processing.Greatly save processing steps and time costs, improve working efficiency.
Check Stock

Qualtech 1-3/4\ 4MT HSS Undersized Shank Taper Shank Drill Bit, DWDTS1-3/4-4MT

  • Pilot point twist drill bit, high speed steel material..
  • High performance twist drill bit with morse taper shank for high precise drilling of larger bore diameter..
  • Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • Self-centering point, do not need assistant center drilling or center punching..
  • For general using drilling in wood, aluminum, malleable iron, plastic etc..
Check Stock

Chiloskit 28 pc 3/32\ - 1/2\ Transfer Punch Set Machinist Tools Punches Machinist Thread Kit

  • 28-pc. CENTER PUNCH Set Steel Transfer Punch Machinist Thread Tool Kit Set.Heat treated, carbon steel construction.Black oxide finished for durability..
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch (not included) to make a dimple.
  • Eliminates guesswork when transfering threaded, drilled or reamed holes in sheet metal..
  • Eliminates the guesswork when transferring punches through holes.A transfer punch set is a punch set in an index with a specific outer diameter that is non-tapered and extends the entire length of the punch, except for the tip. It is used to tightly fit the tolerances of an existing hole and when struck precisely transfers the center of that hole to another surface..
  • 4-7/8" long: 3/32" to 1/2" by 1/64" increments, handy 17/32"punch.
Check Stock

kengbi Thread Mills Exercise Equipment for Home Use with 1 pc HSS 2 Flute End Mill Cutter 1mm-12mm CNC Straight Shank Milling Woodworking Tool End Mill Router Bit for Wood Cutters

  • Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • hex shank High Speed Steel screw spiral point thread metric plug drill bits， Have sufficient bending strength and wear resistance..
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc..
  • 1.Mill Cutters, usually used to be assembled on milling machine..
  • 2.Suitable for CNC data processing center, carved, high-speed machines..
Check Stock

kengbi Thread Mills Exercise Equipment for Home Use Porta 1 pc HSS 2 Flute End Mill Cutter 1mm-12mm CNC Straight Shank Milling Woodworking Tool End Mill Router Bit for Wood Cutters

  • Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • hex shank High Speed Steel screw spiral point thread metric plug drill bits， Have sufficient bending strength and wear resistance..
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc..
  • 1.Mill Cutters, usually used to be assembled on milling machine..
  • 2.Suitable for CNC data processing center, carved, high-speed machines..
Check Stock

kengbi Thread Mills Exercise Equipment for Home Use Porta 4mm 12mm 8mm 10mm 6mm HSS CNC Straight Milling Cutter Shank 4 Flute End Drill Bit for Choose (Cutting Edge Diameter : 4mm)

  • Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • hex shank High Speed Steel screw spiral point thread metric plug drill bits， Have sufficient bending strength and wear resistance..
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc..
  • - Mill Cutter,usually used to be assembled on milling machine.
  • - Suitable for CNC data processing center, carved, high-speed machines.
Check Stock

Gared Pro-Mold Backboard Padding in Royal

  • Includes self tapping screw hardware and sag-resistant center rod.
  • Padding universally fits any 72 in. backboard with a 2 in. channel.
Check Stock

DAREX Drill Sharpener V-390

  • Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money..
  • Portable tools that you can carry around and don't take up space in your backpack..
  • Made of high-quality ABS plastic and brown corundum grinding wheel, High hardness, rustproof, solid and durable,self-centering point, do not need assistant center drilling or center punching..
  • Compact and portable drill grinding tool, Use this drill bit sharpening tool with your power drill to keep bits sharp and ready for use,With simple structure and great material, the grinding wheel drill bit has good sharpening effect, saving much effort. Great for fast drilling, tapping,etc. And Fast replacement composite cone, uses drill edged principle..
  • This diamond Drill Bit Sharpener is mainly used for grinding iron drills, not suitable for other high hardness drills.
Check Stock

6Pcs Drill Tap Combination Titanium Coated HSS 1/4inch Hex Shank Drill Bits Metric Thread Drill and Tap Bits Set M3-M10

  • 4341 material is suitable for wood, aluminum, iron and other materials with low hardness. 6542 (M2) has high.
  • hardness and is more durable. It can be applied to steel plates, even thin 304 stainless steel plates of about 2mm..
  • One-click drilling and tapping greatly saves processing steps and time costs, and improves work efficiency..
  • Self-centering, no auxiliary center drilling or center punching required..
  • SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please feel free to contact us.We will provide after-sales service until you are satisfied..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

Tektall Carburetor Throttle linkage kit for Weber 40/44/48mm bore IDF Carb VW Beetle T1 cooling

  • Top Quality Brand new aftermarket Tektall Carburetor Throttle Linkage kit, made from solid steel to resist failure caused by weakness in the original part's construction, durable and sturdy linkage contains all of the quality hardware and features for IDF Carburetor linkage..
  • Fitment: This Tektall carburetor Throttle linkage kit Fits for Weber 40mm 44mm 48mm bore IDF Dual Carburetors' mounting, which is always used on earlier VW Beetle T1 cooling Engines..
  • New adjustable drop rods and ball end carburettor throttle levers are included As pictured, Rods are about length 35cm center to center..
  • Tektall Carburetor Throttle Linkage kit has been redesigned for greater durability and steability. This whole kit has undergone try-on, corrosion and material testing to ensure a quality fit and long service life..
  • Easy installation, no drilling or tapping required. Please do match the fitment and the structure carefully before purchasing, Thanks.
Check Stock