Categories

Best Tekton Sockets

TEKTON 1/4 Inch Drive x 8 Inch Socket Rail 13 Clips Red | OSR01113

  • Universal socket organizer to hold 1/4 inch drive sockets and bit sockets.
  • Patented twist-to-lock design is simple and secure.
  • Keyhole slot mounts to wall or workbench.
  • Combine multiple socket rails with Tekton Socket Rail Trays.
Check Stock

TEKTON 1/2 Inch Drive x 18 Inch Socket Rail 15 Clips Red | OSR23115

  • Universal socket organizer to hold 1/2 inch drive sockets and bit sockets.
  • Patented twist-to-lock design is simple and secure.
  • Keyhole slot mounts to wall or workbench.
  • Combine multiple socket rails with Tekton Socket Rail Trays.
Check Stock

TEKTON 1/4, 3/8 Inch Drive Socket Rails & 13 Inch Tray (Gray) | Made in USA | OST72328

  • Universal socket organizer to hold sockets and bit sockets.
  • Patented twist-to-lock design is simple and secure.
  • Keyhole slot mounts to wall or workbench.
Check Stock

TEKTON 91805 1/4 3/8 and 1/2-Inch Drive Socket Holder Set 3-Piece

  • Keep your sockets organized using the TEKTON 1/4, 3/8 and 1/2 Inch Drive Socket Holders.
  • Patented twist-to-lock design is simple to use and securely holds sockets.
  • Keep in tool chest, carry in tool box, or mount to wall or workbench with keyhole slot.
Check Stock

TEKTON 1/2 Inch Drive Thin Wall Impact Flip Socket Set (6-Piece) | SIF92400

  • Includes 5-pc. 1/2 in. drive impact flip sockets: 17 x 19 mm, 21 x 22 mm, 3/4 in. x 13/16 in., 7/8 in. x 15/16 in., 1 x 1-1/16 in..
  • 1-pc. 1/2 in. drive impact extension bar: 3 in..
  • Fits most sizes and styles of lug nuts and bolts–ideal for servicing cars, trucks, utility trailers, and more.
  • Each socket well is extra deep to provide increased engagement with lug nuts and clearance for decorative caps.
  • The outer diameter of each socket is 1 to 2 mm smaller than other TEKTON impact sockets, allowing for better access in tight lug nut wells.
  • Steep, 60 degree chamfered openings make it easy for the flip sockets to slide over lug nuts.
  • Sizes are marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Each socket meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
  • High-density polyethylene case withstands common lubricants, fuels, and solvents.
Check Stock

TEKTON Angle Head Open End Wrench Set, 16-Piece (10-27 mm) - Holder | WAE91202

  • Includes 16-pc. angle head wrenches: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27 mm.
  • UNMATCHED ACCESS: Tekton’s 30/60 angle head wrenches save you precious time because you can continue work without disconnecting or dismantling equipment to access tight spots..
  • OPTIMIZED BEAM POSITION: The wrench beam is shifted out of your way to allow the greatest range of motion..
  • LEAN OUTSIDE JAW: We put steel exactly where needed to withstand the forces generated throughout the jaw, resulting in the leanest possible shape..
  • STRONG INSIDE JAW: By drawing the largest possible inside corner radius, we reduced the effects of concentrated stress..
  • 4140 CHROME MOLY STEEL: Meets high strength and toughness requirements with a leaner shape and less material than competitor wrenches..
  • PRECISE MANUFACTURING: We use laser cutting and CNC machining to make our wrenches with efficiency and precision. The result is a better fit and lower cost..
  • MADE IN USA: Designed and engineered by Tekton at our Grand Rapids, MI headquarters and made entirely in the USA with USA-made steel..
Check Stock

TEKTON Angle Head Open End Wrench Set, 4-Piece (1-1/16-1-1/4 in.) | WAE90101

  • Includes 4-pc. angle head wrenches: 1-1/16, 1-1/8, 1-3/16, 1-1/4 in..
  • UNMATCHED ACCESS: Tekton’s 30/60 angle head wrenches save you precious time because you can continue work without disconnecting or dismantling equipment to access tight spots..
  • OPTIMIZED BEAM POSITION: The wrench beam is shifted out of your way to allow the greatest range of motion..
  • LEAN OUTSIDE JAW: We put steel exactly where needed to withstand the forces generated throughout the jaw, resulting in the leanest possible shape..
  • STRONG INSIDE JAW: By drawing the largest possible inside corner radius, we reduced the effects of concentrated stress..
  • 4140 CHROME MOLY STEEL: Meets high strength and toughness requirements with a leaner shape and less material than competitor wrenches..
  • PRECISE MANUFACTURING: We use laser cutting and CNC machining to make our wrenches with efficiency and precision. The result is a better fit and lower cost..
  • MADE IN USA: Designed and engineered by Tekton at our Grand Rapids, MI headquarters and made entirely in the USA with USA-made steel..
Check Stock

Performance Tool W975 6-in-1 Quick Change Screwdriver

  • Access hard to reach screws with ease using the TEKTON 20 in.
Check Stock

TEKTON 3/8 Inch Drive Twist Lock Socket Clip Set 5-Piece | Made in USA | OSC01005

  • Extra socket clips for use with Tekton Socket Rails.
  • Patented twist-to-lock design is simple and secure.
  • Turn socket 45 degrees to securely lock socket and reverse to unlock.
Check Stock

TEKTON 13-Tool Combination Wrench Pouch (1/4-7/8 in.) | 95811

  • Designed to hold 13 Tekton combination wrenches (not included) - may not fit other brands or other types of wrenches.
  • Marked with inch sizes: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch.
  • When pouch is rolled up, its tailored cover keeps wrenches from sliding out.
  • Fabric hanging loops, instead of metal grommets, prevent scratches when laid on finished surfaces.
  • Strong and flexible woven polyester fabric rolls easily and lays flat.
Check Stock

TEKTON 15-Tool Combination Wrench Pouch (1/4-1 in.) | ORG27315

  • Designed to hold 15 Tekton combination wrenches (not included) - may not fit other brands or other types of wrenches.
  • Marked with inch sizes: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1 inch.
  • When pouch is rolled up, its tailored cover keeps wrenches from sliding out.
  • Fabric hanging loops, instead of metal grommets, prevent scratches when laid on finished surfaces.
  • Strong and flexible woven polyester fabric rolls easily and lays flat.
Check Stock

TEKTON Angle Head Open End Wrench Set, 4-Piece (1-5/16 - 1-1/2 in.) | WAE90103

  • Includes 4-pc. angle head wrenches: 1-5/16, 1-3/8, 1-7/16, 1-1/2 in..
  • UNMATCHED ACCESS: Tekton’s 30/60 angle head wrenches save you precious time because you can continue work without disconnecting or dismantling equipment to access tight spots..
  • OPTIMIZED BEAM POSITION: The wrench beam is shifted out of your way to allow the greatest range of motion..
  • LEAN OUTSIDE JAW: We put steel exactly where needed to withstand the forces generated throughout the jaw, resulting in the leanest possible shape..
  • STRONG INSIDE JAW: By drawing the largest possible inside corner radius, we reduced the effects of concentrated stress..
Check Stock

TEKTON Angle Head Open End Wrench Set, 11-Piece (3/8-1 in.) - Holder | WAE91102

  • Includes 11-pc. angle head wrenches: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
  • UNMATCHED ACCESS: Tekton’s 30/60 angle head wrenches save you precious time because you can continue work without disconnecting or dismantling equipment to access tight spots..
  • OPTIMIZED BEAM POSITION: The wrench beam is shifted out of your way to allow the greatest range of motion..
  • LEAN OUTSIDE JAW: We put steel exactly where needed to withstand the forces generated throughout the jaw, resulting in the leanest possible shape..
  • STRONG INSIDE JAW: By drawing the largest possible inside corner radius, we reduced the effects of concentrated stress..
Check Stock