Categories

Best Telescopic Sight Assembly

KINGSWELL Telescopic Fishing Rod and Reel Combo, Premium Graphite Carbon Collapsible Fishing Pole with Spinning Reel, Portable Travel kit for Adults Kids, 6.80ft Medium Heavy

  • 【All in One Travel Rod Kit】 Includes 6.80ft telescopic fishing pole, size 3000 spinning fishing reel. Carrying bag and fishing line not included..
  • 【Telescopic fishing pole】 Our Kingswell Telescopic fishing rod measures 6.80ft (6ft 9in) fully extended and is made of Japanese 24/30 ultra high density carbon fiber. It collapses down to 22 inches making it easy to travel with and store. It can handle casting lures or weights up to 1.5oz..
  • 【Spinning Reel S3000】 Kingswell S3000 reel features an aluminum body, 5+1 stainless steel ball bearings, and a 5.2:1 gear ratio. Handle can be interchanged between left or right hand. It is capable of handling up to 15lbs of drag assist. Perfect for big trout, bass, salmon, yellowtail..
  • 【Floating Guide System】Make the most of your cast with our floating guide system. Our telescopic fishing rod features 5 fixed guides and 2 floating guides that reduces line friction upon casting allowing for maximum casting distance..
  • 【Easy Assembly】Every section and rod guide has a marking that aligns each rod guide and section making assembly easy..
Check Stock

PMSW 11 Drywall Lift Rolling Panel Hoist Jack Lifter Construction Tools with Adjustable Telescopic Arm Lockable Caster Wheel, 150 lbs

  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage..
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them..
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist..
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings..
Check Stock

Flip up Sight Mb-us Gen 2nd Front and Rear Sight for Picatinny Weaver Rails

  • EASY TO INSTALL: This folding backup sight is easy to mount on any Picatinny or weaver rail..
  • Package Included: 1 x Flip Up Sight set(front sight & rear sights)，1x Tool..
  • ADJUSTABLE：Flip up sight easily activated from either side or by pressing the top..
  • STURDY CONSTRUCTION：Impact resistant polymer construction provides light weight and resists operational abuse..
  • High-Quality：Flip-up front and rear sight tower complete with square post assembly with locking retention and precision elevation adjustments for greater accuracy..
Check Stock

Gen 2 Kel Tec Sub 2000 Front Sight Pivot Block for Aftermarket Fiber Optic/Tritium Sight Post

  • Stainless steel front sight pivot block redesigned and machined to tighter tolerances to remove the excessive front sight post movement on the Generation 2 Sub 2000. 75% improvement is possible..
  • Allows for the installation of popular aftermarket fiber optic and tritium front sight posts that use a large diameter style detent plunger, including Trijicon, Ameriglo, Mounting Solutions Plus and Meprolight..
  • Aftermarket front sight post and detent are not included. Large diameter style detent plunger spring is included..
  • The original Sub 2000 sight housing, pivot screw, and pivot spring are reused..
  • Comes with assembly instructions and a tube of medium strength thread locker..
Check Stock

Worms Armageddon

  • No conversion of estimated target size from inches into decimal equivalent of yards is necessary, as the Target Size Scale is in increments of feet....
  • No entry of data or operations through a keypad is necessary, as the device is purely analog and only requires the alignment of figures on scales..
  • No memorization of formulae is necessary, as the correct formulae are built into the scales..
  • No complex calculations for determination of telescopic sight adjustment or hold-over at various ranges are necessary, as the scales of the device....
  • No separate data sheet is necessary for bullet drop figures, as the reverse side of the device is designed to accommodate either commercially....
Check Stock

Bumlon Scope Mount Rail Picatinny 20mm Weaver Base Scope Rail Sight

  • Ultra light weight and low profile red dot scope mount.
  • Customizable fine level adjustment for perfect zero (up/down, left/right).
  • Reference aiming dots on rear to use scope mount rail as backup iron sight.
  • Replaces stock rear sight assembly and installs in seconds.
  • Quick 1 step installation.Scope mount rail allows you to use fixed sight.
Check Stock

Soundtrack II Armageddon [Explicit]

  • No conversion of estimated target size from inches into decimal equivalent of yards is necessary, as the Target Size Scale is in increments of feet....
  • No entry of data or operations through a keypad is necessary, as the device is purely analog and only requires the alignment of figures on scales..
  • No memorization of formulae is necessary, as the correct formulae are built into the scales..
  • No complex calculations for determination of telescopic sight adjustment or hold-over at various ranges are necessary, as the scales of the device....
  • No separate data sheet is necessary for bullet drop figures, as the reverse side of the device is designed to accommodate either commercially....
Check Stock

GRIFIN M2 Sights Deploy Kit Stock Accessories

  • allows Shooters easy access to a set of backup iron sights for close range target engagements, without the need to Remove their primary optic.
  • they feature a new, more robust clamp-style base that securely attaches to the 12 o’clock rail position and, once deployed, a quick roll of the rifle is all that’s needed to acquire a useable sight picture.
  • when not required, the sights fold neatly to the right of the rifle's top rail.
  • It includes an elevation adjustable 200-600 meter micro rear sight and finger adjustable Micro front sight Assembly.
Check Stock

Mildot Master

  • No conversion of estimated target size from inches into decimal equivalent of yards is necessary, as the Target Size Scale is in increments of feet and inches..
  • No entry of data or operations through a keypad is necessary, as the device is purely analog and only requires the alignment of figures on scales..
  • No memorization of formulae is necessary, as the correct formulae are built into the scales..
  • No complex calculations for determination of telescopic sight adjustment or hold-over at various ranges are necessary, as the scales of the device convert drop/drift figures directly into both MOA and mils..
  • No separate data sheet is necessary for bullet drop figures, as the reverse side of the device is designed to accommodate either commercially available data decals or user-produced data strips..
Check Stock

Ballistics - Calculator

  • No conversion of estimated target size from inches into decimal equivalent of yards is necessary, as the Target Size Scale is in increments of feet and inches..
  • No entry of data or operations through a keypad is necessary, as the device is purely analog and only requires the alignment of figures on scales..
  • No memorization of formulae is necessary, as the correct formulae are built into the scales..
  • No complex calculations for determination of telescopic sight adjustment or hold-over at various ranges are necessary, as the scales of the device convert drop/drift figures directly into both MOA and mils..
  • No separate data sheet is necessary for bullet drop figures, as the reverse side of the device is designed to accommodate either commercially available data decals or user-produced data strips..
Check Stock

23-in-1 Metric-inch Multi-purpose Plum Wrench Double-headed Self-tightening Multi-function Universal Opening Mini Linkage Spanner

  • Adjust the telescopic position by turning the middle nut, so that the length of the telescopic rods at both ends is suitable, which is convenient for clamping nuts of different sizes..
  • Multifunctional industrial wrench, forged from chrome vanadium steel, hardness can reach 60HRC after heat treatment, high toughness, impact resistance and wear resistance.
  • The handle is made of high-quality engineering plastic, which is comfortable to hold and effectively non-slip. The surface of the roller has anti-slip patterns, which is convenient and flexible..
  • Telescopic rod design, widely compatible, uniform and strong torque, large force, effectively improve work efficiency.
  • Size:7.87*1.81inch（20*3cm）weight:0.66pt（300g）Widely used in auto repair, mechanical disassembly, assembly, daily maintenance and other purposes..
Check Stock

Knights Armament KAC 45 Degree Offset FLDNG Sight Set

  • allows Shooters easy access to a set of backup iron sights for close range target engagements, without the need to Remove their primary optic.
  • they feature a new, more robust clamp-style base that securely attaches to the 12 o’clock rail position and, once deployed, a quick roll of the rifle is all that’s needed to acquire a useable sight picture.
  • when not required, the sights fold neatly to the right of the rifle's top rail.
  • It includes an elevation adjustable 200-600 meter micro rear sight and finger adjustable Micro front sight Assembly.
Check Stock

UTG PRO Made in USA Model 870 TM Picatinny Rail Mount

  • Proudly designed and made in USA, fits on Remington MTU028SG 870/1100 pre-drilled shotgun receiver.
  • 6.1 inch extended length with 14 Picatinny rail slots for optimal placement of scope, dot sight or iron sight, and flexible eye relief adjustment.
  • Low profile with see thru design for Use of front bead sight, contoured bottom to fit perfectly on the receiver.
  • Precision Machined from aircraft grade aluminum with hard Anodizing matte back finish, simple and friendly installation, no gunsmithing required.
  • Package complete with assembly screws and tools.
Check Stock