Categories

Best Temperature Sensing Thermistor

RCYAGO Dissolved Oxygen Meter with Electrode Filling Fluid

  • Dissolved oxygen meter is a precision instrument for measuring dissolved oxygen and temperature. The dissolved oxygen probe is a thin film with a polarographic sensor and a thermistor for temperature measurement and temperature compensation. The permeable membrane separates the measured solution from the sensing electrode but allows oxygen to pass through the membrane to react, and the concentration can be measured..
  • Dissolved oxygen refers to the concentration of molecular oxygen dissolved in water, generally expressed in mg/L (ppm) and saturation percentage (%), which is the percentage of dissolved oxygen in 1L of water. The oxygen concentration of our dissolved oxygen meter is 0.0-40.0mg/L, most of the range of dissolved oxygen meters on the market is 0.0-20mg/L. When measuring and calibrating, needn't open the protective cover of the electrode, just put the electrode in the solution for measurement..
  • Detachable probe, easy to replace, equipped with 6 probe protective covers and anaerobic water calibration powder. The film inside the protective cover cannot be taken apart. After using it for a period of time, the test value is inaccurate and the calibration is still inaccurate, and the membrane sleeve needs to be replaced..
Check Stock

Thermistor for Dometic 3851210025 Refrigerator,RV Refrigerator Sensor Replacement for Dometic Refrigerator RM Series W 2 Wire Thermistor RM1350 2351 2354 2410 2620 2652 2852 2862 3807

  • Replacement for Dometic refrigerators 3851210025 thermistor. Replaces Part Numbers: 2931863035 2931863076 3851059042.
  • The thermistor for dometic rv refrigerator adopts environmental protection epoxy resin coating and double-layer sealing, with better insulation....
  • Fix for Dometic refrigerator temperature is over cold freezing or hot spoiling.Just try to replacing our dometic 3851210025 refrigerator thermistor....
  • Compatible with almost all Dometic refrigerators models starting RM with two wire thermistor:RM1350 RM2351 RM2354 RM2410 RM2451 RM2454 RM2551 RM2554....
  • The model name of thermistor may be different,details pls see below product numbers.3-year warranty .If you have any question pls feel free to contact....
Check Stock

STANDARD IGN PARTS Engine Control Module Wiring Relay RY-412

  • Communicates the engine coolant temperature to the ECM to ensure proper air/fuel ratio, cooling fan and temperature gauge operation.
  • Thermistor placement within the housing matches original design to ensure proper output.
  • Proper thermal conductive grease to provide accurate temperature transfer to the thermistor.
  • Causes for replacement: check engine light, no/erratic gauge operation, no/erratic cooling fan operation, engine overheating.
  • Causes for replacement: rough idle, engine hesitation, poor fuel economy, failed emissions test.
Check Stock

240597203 Refrigerator Thermistor Temperature Sensor AP4032998 1258948 240597202 AH1765215 EA1765215 PS1765215 240597203 240597201

  • Applicable Refrigerator Models: AP4032998 1258948 240597202 7240597203 AH1765215 EA1765215 PS1765215 240597203 240597201.
  • Product Use: This refrigerator temperature sensor used to adjust the internal temperature of the refrigerator, so that your refrigerator can be at a....
  • High Quality: This refrigerator internal thermistor replacement element is new high quality replacement part for more stable and excellent work and....
  • The Package Includes: 1PCS temperature sensor, NOTE: This refrigerator temperature sensor is suitable for specific models of French door....
  • Service:We provide friendly service, if you have any questions about the Thermistor Temperature Sensor for Refrigerator, please feel free to contact....
Check Stock

uxcell 20PCS NTC Thermistors Resistors MF58 3950B 10K Ohm Glass Sealed Temperature Sensors

  • Made of high-quality materials and has a long service life..
  • Small size, fast reflection speed, stable operation for a long time, good consistency..
  • NTC (negative temperature coefficient) thermistor, its resistance decreases with increasing temperature. High resistance and B value accuracy.
  • Widely used in air conditioning equipment, heating equipment, electronic thermometers, liquid level sensors, etc..
  • Material: Oxide film. Temperature coefficient: NTC. Rated power: 0.25w. Package includes: 20 x NTC thermistor..
Check Stock

Whirlpool W10144820 Valve for Washer

  • Water inlet valve and inlet assembly with thermistor for water temp sensing.
  • Works with the following models: Whirlpool 1CWTW5200VQ1, Whirlpool 1CWTW5300VW1, Whirlpool 1CWTW5505VQ1.
  • Whirlpool 1CWTW5590VQ1, Whirlpool 1CWTW5790VQ1.
  • Whirlpool 7MWT98820WM1, Whirlpool 7MWT98825WW1.
  • Whirlpool 7MWT98840WW1, Whirlpool 7MWT98960WM1.
Check Stock

8577274 Thermistor for Whirlpool Dryers by PartsBroz - Replaces WP8577274, AP6013514, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, WP8577274VP

  • ✅ PART NUMBER 8577274: The thermistor is a high-quality exact replacement for part numbers WP8577274, AP6013514, 8577274, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, and WP8577274VP..
  • ✅ FOR WHIRLPOOL DRYERS: Use the part to fix select Whirlpool, KitchenAid, Kenmore/Sears, and Maytag dryers. Check your dryer manual or reach out to us to confirm compatibility with your model..
  • ✅ FIXES COMMON PROBLEMS: Dryer on the fritz? Replacing the thermistor, which regulates temperature in your dryer, can fix dryers that don’t produce enough heat, don’t start, or shut off too soon..
  • ✅ SIMPLE DIY FIX: Remove a faulty thermistor and install this new one in under 20 minutes. Helpful tools include a 1/4-inch nut driver, a small flathead screwdriver, and a 1/4-inch socket and ratchet..
  • ✅ HIGH-QUALITY PART: Designed to last, this thermistor meets or exceeds all original manufacturer specifications for performance and fit..
Check Stock

RCYAGO Portable Dissolved Oxygen and Temperature Meter, DO Range: 0-40.00 mg/L, 0.1 mg//L Resolution, Digital Dissolved Oxygen Meter with Electrode Filling Fluid (No Backlight)

  • Dissolved oxygen meter is a precision instrument for measuring dissolved oxygen and temperature. The dissolved oxygen probe is a thin film with a polarographic sensor and a thermistor for temperature measurement and temperature compensation. The permeable membrane separates the measured solution from the sensing electrode but allows oxygen to pass through the membrane to react, and the concentration can be measured..
  • Dissolved oxygen refers to the concentration of molecular oxygen dissolved in water, generally expressed in mg/L (ppm) and saturation percentage (%), which is the percentage of dissolved oxygen in 1L of water. The oxygen concentration of our dissolved oxygen meter is 0.0-40.0mg/L, most of the range of dissolved oxygen meters on the market is 0.0-20mg/L. When measuring and calibrating, needn't open the protective cover of the electrode, just put the electrode in the solution for measurement..
  • Detachable probe, easy to replace, equipped with 6 probe protective covers. The film inside the protective cover cannot be taken apart. After using for a period of time, the test value is inaccurate and the calibration is still inaccurate, and the membrane sleeve needs to be replaced..
  • Adopts the digital screen display, which is more clear and convenien....
Check Stock

WINSINN HT-NTC100K Thermistor Sensor Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend Pack of 5Pcs

  • ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm.
  • ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature....
  • ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
  • ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees)..
Check Stock

FYSETC Prus i3 MK3 Upgrade Hotend Parts HT-NTC100K Thermistor Sensor High Temperature +250 Degrees 2 Pins for 3D Printer MK3 Extruder Heater Block 3Pcs

  • Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the....
  • The temperature measurement: -50 °C ~ +250 °C for a long lifecycle, sometimes can reach up to +300℃ for a short time using, can replace the....
  • The Customized Terminal Connector( XH2.54 2P with buckle) is specially for MK3/MK3S prus einsy boards, so please check before ordering. If for Prus....
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
Check Stock

Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2

  • Comes assembled and tested with a free bonus jst cable.
  • For charging single lithium ion/lithium polymer.
  • Chip supports a 10K ntc thermistor which we have stuffed as a plain 10K. For people who require temperature monitors (using high charge rates), remove the 10K and solder in the thermistor in its place.
Check Stock

279973 & 3392519 & 8577274 Dryer Thermal Cut Off Fuse Kit with Thermistor Control and Thermal Fuse Replacement Part fit for Whirlpool & Kenmore Dryers

  • ... Fuse – Dryer non resettable thermal fuse, two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running..
  • ✅8577274 Thermistor Control – Dryer thermistor temperature sensor..
  • ✅Replaces Part Number – Thermal Fuse & Thermostat 279973 3391913 3404151 3404152 3977395 8318314 897710 AP3094323 PS334387 EAP334387. Thermal Fuse 3392519 WP3392519 3388651 694511 80005 ET401 G4AP0500 3392519 PS11741460 AP6008325 2986 EAP11741460. Thermistor Control 8577274 WP8577274 3390292 3406294 3976615 772546 8577274 1181075 AP6013514 PS11746740 EAP11746740. the replacement part is a direct replacement for your dryer..
  • ✅Buy with Confidence – Order from KONDUONE, you can return or exchange within 3 months, true worry-free shopping experience. If replacement part ever fails on your Dryer simply contact us for a replacement..
Check Stock

FYSETC 3Pcs Upgrade HT-NTC100K 3950 XH2.54 2 Pin Cartridge Thermistor Sensor Ender 3 V2 Hotend Parts High Temperature 250 Degrees for Ender 3 5 Pro CR10 A8 Maker Pro Heater Block

  • Upgrade HT-NTC100K 3950 Thermistor: Pack of 3Pcs. Note: Temperature measurement head cylinder diameter is 3mm, length 15mm, The connector is 2pin....
  • The temperature measurement: -20 °C ~ +250 °C for a longer lifecycle, sometimes can reach +300℃(but not recommand to use it long time)can replace....
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. If need a....
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
Check Stock