PIC Gauge TW-BR02-23S2 2-1/2\ Stem Length, 1/2\ NPT x 3/4\ NPT Connection Size, Stepped Style, 0.260\ Bore Diameter, Brass Standard Thermowell for Industrial Bimetal Thermometers

  • ♦【Package Content】2pcs X 1/2inch NPT 100mm Thermowell..
  • ♦【Material】Made of high quality stainless steel. Anti-corrosion and durable. It has strong rust resistance and thermal conductivity..
  • ♦【Dimensions】Rod Length: 100mm/4inches.
  • Total Size: 138*21mm/ 5.4*0.83inch(L*W)..
  • ♦【Fine Workmanship】The threads are clear and deep. A tight fit is effective against water. The thermowell permits removal of the temperature instrument for replacements, repair or testing without effecting the process media or the system..
  • ♦【Applications】A properly selected thermowell will protect the temperature instrument from possible damage caused by these process variables. You may use our thermowells for all process systems where pressure, flow rate or viscosity, abrasive and corrosive materials exist alone or together..
Check Stock

uxcell 8mm Dia G1/2 Thermowell Weldless Stainless Steel 304 30mm Length for Beer Fermenter

  • DURABLE MATERIAL: This Stainless Steel Thermowell is made of 201 stainless steel, which is durable and has a long service life..
  • GOOD REPLACeMENT: The Thermowells can nicely replace a needle thermometer in brew kettle..
  • QUALITY ASSURANCE: This Stainless Steel Thermowell has no bubbles, no pinhole and other blemishes..
  • ACCEPTABLE THREAD: The inlet of Thermowel accepts 1/2 inch male pipe thread..
  • DAMAGE PREVENTION: A quick fit Thermowell can protect your thermometer from possible damage..
Check Stock

Oumefar Stainless Steel Thermowell 1/2 inch NPT Threads Temperature Sensors Thermometer Instruments Thermowell for Homebrew Brewing Beer Fermenter

  • 【Durable Material of This Thermometer Kit】: This Stainless Steel Thermowell is made of 201 stainless steel, which is durable and has a long service life..
  • 【Good Replacement Accessories】: The Thermowells can nicely replace a needle thermometer in brew kettle..
  • 【Quality Assurance and Professional Performance】: This Stainless Steel Thermowell has no bubbles, no pinhole and other blemishes..
  • 【Acceptable Thread】: The inlet of Thermowel accepts 1/2 inch male pipe thread..
  • 【Damage Prevention】: A quick fit Thermowell can protect your thermometer from possible damage..
Check Stock

uxcell 8mm Dia G1/2 Thermowell Weldless Stainless Steel 304 50mm Length for Beer Fermenter

  • G1/2 thread, M12 x 1.5 installation internal thread.
  • Stainless steel 304 material, durable, long service life.
Check Stock

uxcell 8mm Dia G1/2 Thermowell Weldless Stainless Steel 304 250mm Length for Beer Fermenter

  • G1/2 thread, M12 x 1.5 installation internal thread.
  • Stainless steel 304 material, durable, long service life.
Check Stock

1/2 NPT Threads Stainless Steel Thermowell for Temperature Sensors

  • Material: The thermowell is made of 201 stainless steel, which is strudy and has long service life. A great choice for you.
  • Good performance: Works nicely to replace a needle thermometer in brew kettle. You can use it with peace of mind.
  • Reliable: No bubbles, no pinhole and other blemishes. Bring you a new and different using feeling.
  • Convenient to use: A quick fit thermowell protects your thermometer from possible damage..
Check Stock

Meprotal 2pcs 1/2 Inch NPT 200mm Length Thermowell Weldless Temperature Sensor Stainless Steel Thermowell with Plastic Cap for Homebrew Brewing Beer Fermenter

  • G1/2 thread, M12 x 1.5 installation internal thread.
  • Stainless steel 304 material, durable, long service life.
Check Stock

1/2 inch thermowell Stainless Steel 304 with Plastic Cap for Beer fermenter ds18b20 pt100 Homebrew Boiler 30 50 100 150 200 300 400 500mm (30mm)

  • G1/2 thread, M12 x 1.5 installation internal thread.
  • Stainless steel 304 material, durable, long service life.
Check Stock

Npt 3/4 inch thermowell Stainless Steel 304 thermowell Cap for Beer fermenter Homebrew Boiler 30mm 50mm 100mm 150mm 200mm 300mm 400mm 500mm (200mm)

  • G1/2 thread, M12 x 1.5 installation internal thread.
  • Stainless steel 304 material, durable, long service life.
Check Stock

uxcell 8mm Dia G1/2 Thermowell Weldless Stainless Steel 304 300mm Length for Beer Fermenter

  • Package included 2pcs stainless steel thermowells (with nylon cable gland)..
  • It has strong rust resistance and thermal conductivity. long lasting..
  • It is made of stainless steel, which is strong, durable and rust-proof..
  • Our thermowells are used in all process systems where pressure, flow rate or viscosity, abrasive and corrosive materials exist alone or together..
  • The threads are clear and deep. A tight fit is effective against water. The thermowell permits removal of the temperature instrument for replacements, repair or testing without effecting the process media or the system..
Check Stock

PIC Gauge TW-ST04-23S2 4\ Stem Length, 1/2\ NPT x 3/4\ NPT Connection Size, Stepped Style, 0.260\ Bore Diameter, 304 Stainless Steel Standard Thermowell for Industrial Bimetal Thermometers

Check Stock

Homebew Weldless Bi-Metal Thermometer Kit, 3\Face & 2\Probe, 1/2\MNPT, 0~220F Degree, Beer Brewing Thermometer, Homebrew Kettle

  • 3’’ LARGE GLASS FACE - Easy to read , shows increments in both Fahrenheit and Celsius, 0-220ºF and -10-100ºC.
  • 3/4’’ THREADS - This dial thermometer designed with 1/2 NPT threads for use with brew pots hole 3/4’’ diameter.
  • 2" PROBE - The dial thermometer can be used with or without the thermowell.
  • NO MORE OPENING LIDS -This dial thermometer allows you to easily monitor the temperature of your boil from the bulkhead.
  • 100% 90 DAY MONEY BACK GUARANTEE - If you are not satisfied for any reason, simply return the products for a full refund, no questions asked..
Check Stock

Traceable Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bottle Probe

  • The TL2-A is a versatile 2-channel precision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Averag....
Check Stock