2Pcs STC-1000 Digital Temperature Controller 12V Thermostat Incubator Thermoregulator Relay Heating Cooling with Sensor Probe Cable
- STC-1000 temperature controller has 2 relays, compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time..
- Two work mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature), refrigerating contro, output delay protection.
- STC-1000 temperature control range: -50-99°.
- control accuracy of 0.1 degrees celsius, control temperature by setting the temperature setting value and the difference value, to set start temperature, stop temperature, corrected temperature correction, delay start..
- 1M waterproof probe, the digital temperature controller can be used in humid and water environment, you can use it in home brewing, refrigerator, pet feeding, reptile, tank, hatching, fermentation, nursery heat pad, accelerated germination..
- Automatically switch between cooling and heating modes: Automatically switch between cooling and heating modes to keep your device within the ideal temperature range. The stable and reliable flames retardant plastic shell reaches V0 level and passes the EMC anti-interference test. Audible and visual alerts for high temperature and sensor failure issues..
Check Stock
Twidec/DC 12V Temperature Controller Programmable -50 to 110 ℃ (-58 to 230 °F) Red/Blue LED Display Monitor Heating/Cooling Thermostat Control Module with NTC 10K Waterproof Sensor Probe
- Temperature measuring range:-50 to 110℃ (-58 to 230 ℉).
- Resolution: 0.1℃ at -9.9 to99.9, and 1℃ at other temperature intervals；refresh rate: 0.5 s.
- Dual color LED display:Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time.which can be applied for cooling/ heating mode, you can test indoor or outdoor temperature.
- NTC 10K Which is waterproof, moisture-proof and anti-rust. Available for remote temperate measuring and controlling. It can control heating or cooling according to different needs.
- The electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is ±0.1 degrees Celsius with 0-110℃ high temperature protection.
- The thermostat can be widely applied in intelligent home and industrial equipment, fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems..
Check Stock
Inkbird ITC-608T Temperature Controller with Dual Temperature Sensor AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed
- ❤❤【US ETL Certificate Listed 】ITC-608T thermostat temperature controller is ETL listed, and rigorously tested for quality control and safety. More power up to 1800W..
- ❤❤【Main Functions]】Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
- ❤❤【Dual Temperature Sensor]】Temperature sensors are waterproof and the temperature control range is -40~212°F (-40~100°C)..
- ❤❤【Multiple Functions Temperature and Humidity Control Mode with Dual Relay Output】ITC-608T can work as a temperature controller, a humidity controller, a temperature humidity controller and dual temperature controller..
- ❤❤【Multipurpose Usage】 Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking. Max Loading: 120V 15A 1800W..
Check Stock
Powerblanket TH350 Insulated IBC Storage Tote Heater with Adjustable Thermostat Controller, Fits 350 Gallon Steel IBC Tote's
- The mechanical thermostat temperature controlling range is from 0℃ to 60℃, perfect for using to control heater.The adjustable button is for easy and convenient to adjust the controlling temperature..
- When the room temperature is lower than the temperature set by the thermostat, the circuit closes and the equipment starts. When the room temperature is higher than the temperature set by the thermostat, the circuit is disconnected and the equipment stops. N.O : When the room temperature is lower than the temperature set by the thermostat, the circuit is disconnected and the equipment stops..
- The bottom of mechanical temperature controller switch is with 2 wire interfaces,which can make wire connection become more sturdy and safer..
- The back of heat control regulator is with fixed bracket,installation guide rail is easy to fix.Using standard guide rail clamp design,more convenient to disassemble..
- The mechanical temperature control switch mainly use for controlling cooling applications ,like filter fan and other signal device..
Check Stock
Nashone Wireless Thermostat Plug, Thermostat Plug Temperature Controller and Thermostat Switch 110v, Thermostat Outlet for Home Heating Cooling Mode
- Thermostat plug Temperature controller: Heating and cooling mode, built-in accurate temperature sensor, ambient temperature is detected automatically by remote controller, when the current temperature is equal to the target temperature, the thermostat plug stops heating or cooling..
- Thermostat Outlet for Home: No program need, just plug in and select heating or cooling system, then the Nashone thermostat will auto match and play with home device. Maximum load current up to 16A, suitable for most household appliances..
- Thermostat switch 110v: RF 433Mhz technology, automatic learning code, one remote control can control multiple sockets (less than 20 meters), free to choose Auto Operation or Always ON/OFF function (Remote control)..
- Thermostat Outlet Controller: The remote control has a white backlight to display the current temperature and target temperature, it's convenient to flat on the table or hang on the wall. Free to choose between ℃/℉, standard time/summer time. Low battery warning..
- Wide Applications: This temperature controller can accurately control the indoor temperature and maintain a comfortable environment, suitable for infra-red heaters, tube heaters, fan heaters, floor heaters and portable radiators, as well as many electric cooling d....
Check Stock
Reptile Temperature Controller with Timer, Day-Night Timer Thermostat, 3 Outlet Timer Thermostat for Grow Tent, Incubation, Snakes, Fish Tank, Heater, humidifiers, Ball Pythons, Bearded Dragon Tank
- Timer thermostat for reptiles, 3 plugs outlet can work independently. Integrated design with day/night temperature and timing control, which can meet the physiological needs of temperature, and lighting for reptiles, amphibians, or plants..
- Unique design, reptile-friendly design. Raising snakes, lizards, ball pythons, chameleons, corn snakes, tortoises, bearded dragons, and frogs need a controller like this, which can customize the time and temperature of your pet, control the lighting time, control the temperature, and scientifically raise reptiles..
- It is suitable for heating or cooling equipment, controlling light time. temperature control. Socket with time control to manage your aquarium or reptile terrariums to control your ceramic heat lamps, heat mat, UVA lamps, UVB lamps, incubators, fans, A/C, heat sink, blower, and heater to Simulate the natural environment..
- ❄️Multifunctional thermostat with timer. This day/night temperature controller with high and low temperature alarm, timing function, time cycle function and temperature calibration function, support ℃/℉..
Check Stock
Inkbird Digital Temperature Probe Controller ITC608T Thermostat 120V 15A 1800W Pre Wired AC Dual Stage Outlet 12 Period Timer Stage
- US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
- Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
- More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
- Multifunctional usage. Temperature and humi....
Check Stock
DaFuRui 3Pack W1209 Digital Temperature Controller Module，W1209 Temperature Controller Board Case with Waterproof NTC Probe -50~110℃ DC 12V Electronic Temp Control Module Switch
- ★【Excellent Quality】High cost performance, outstanding temperature control performance and accuracy. Simple control panel, wide temperature control range, simple setting, beautiful appearance..
- ★【Powerful Function】Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.simple operation stable performance, high safety and reliability..
- ★【Easy to Use】Good material, durable and super easy to install,The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling..
- ★【Widely Used】Can be directly installed and used, convenient and fast.Widely Used in Hatching field, equipment chassis, air conditioning system, temperature control protection and other fields..
- ★【Package Include】3Pack W1209 w1209 digital temperature controller Module and 3Pack w1209 temperature controller board Hard Plastic Case..
Check Stock
LUXBIRD LB-2SC Digital Heating Mat Thermostat Temperature Controller with 2 Probes and 2 Outlets for Germination, Reptiles, Brewing, Breeding, Incubation, Greenhouse (Max 250W per Outlet)
- Dual Outlets, Dual Control --- LUXBIRD Heating Mat Thermostat can control two outlets independently, each outlet automatically maintaining a different custom temperature, equivalent to two single output temperature controllers. LUXBIRD Heating Mat Thermostat is the value for money..
- Easy To Use --- LUXBIRD controller has a hanging tab to help hang it up and two conveniently angled sockets to prevent wire tangling. And informative backlit LCD can check the temperature and settings in total darkness. The thermostat supports Fahrenheit and Celsius unit switching, and THREE buttons are easy to operate..
- High/Low Temperature Alarms --- Its alarm functions make it a better choice for heating mat control. When the detected temperature exceeds our desired range, it will beep to remind us to take measures to prevent damage. It also supports probe abnormality alarms..
- Real-Time Temperature Monitoring ---It comes with two premium temperature probes to help us keep an eye on the soil temperature. And through its informative backlit LCD, we can view the current temperature, target temperature, and heating status of two heating mats at a....
Check Stock
DIGITEN Wireless Thermostat Plug-in Temperature Controller Outlet Remote Control Built in Temp Sensor Thermometer Heating Cooling Mode for Fan Heater Greenhouse Home Brew Reptile, Black
- ❤️【Remote Control Built in Temp Sensor】: Built-in highly accurate temperature sensor, the temperature is detected automatically by remote controller. When current temperature reach to target temperature, the thermostat plug stop to heat or cool. It work both receivers.This thermostats is designed for the remote control and outlets in one room (Large space), such as kitchen, living room, greenhouse，Sealed large balcony，etc..
- 【Free to switch between ℃/℉, Easy to use and program】: Only 3-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and work well with your home device..
- ❤️【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Maintains stable room temperature and provides comfort and energy saving. High and low temperature alarms are available, 3-Prong socket with grounded terminal, safe and reliable. The maximum load can reach 12A, 1300W. This temperature controller will help you have good reliable temperature control and lower electric bills..
Check Stock
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew
- US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
- Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
- More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock
Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor
- 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
- 2.√Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
- 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
- 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock
Inkbird Temperature Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed Homebrew Reptile Breed
- ????????US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
- ????????Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
- ????????Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
- ????????More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
- ????????Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fe....
Check Stock
