Categories

Best Tension Anchor Bolts

M8 x 80mm 304 Stainless Steel Expansion Bolt 10-Pack External Hex Expansion Screw Bolt(10 pcs)

  • 1. Material : Expansion Sleeve Bolts made of 304 Stainless Steel, sturdy and firm , resistant to rust and corrosion..
  • 2. High Quality: Anchor Expansion is suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • 3. Standard size: M8x60mm expansion bolt. M8 Thread Diameter, Total Length 2.4inch, Expansion Tube Diameter 12mm..
  • 4. Easy to Install: Expansion Bolts come with nuts and washers. Concrete anchor and masonry anchor , easy to be mounted..
  • 5. Widely Application: Expansion Bolts is widely used in fence, burglarproof doors and window, home decoration, engineering, canopy and air conditioning rach fixation..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

TRX Training XMount Mounting Anchor Suspension Trainers V4 Training Club App, Grey

  • SUSPENSION-TRAINER WALL ANCHOR: This is the ultimate anchor for full range of motion. This anchor secures to your ceiling or wall for maximum stability. It’s a great permanent wall hanging kit..
  • WHAT’S IN THE BOX: This wall anchor kit comes complete with 2 bolts for mounting. The unique X design allows you to hang multiple straps. The durable powder-coated steel is indoor- and outdoor-ready, and the plastic backing reduces nicks and scratches..
  • EASY INSTALLATION: This kit mounts to any load-bearing wall or ceiling stud with the included bolts. It can be set up inside or outside, and the powder-coated steel makes it low key. You can transform any space into a training environment!.
  • FOR ALL FITNESS LEVELS: We have a suspension training system for everyone, and our exercise accessories can perform in the gym or at home. Whether you’re a seasoned pro, a beginner, or ....
Check Stock

COSCOOL Sun Shade Sail Hardware Kit Installation 5 Inch Stainless Steel Hardware Kit for Rectangular Shade Sails

  • A set of shade sail hardware kit for RECTANGULAR shade sails includes Turnbuckle(2pcs), Pad eye(4pcs), Carabineer/hook(2pc),Screws(16pcs),expansion anchor bolts(16pcs),and a installation manual..
  • Stainless steel(304) hardware kit for Rectangular/Square sun shade sails installation..
  • 5 inches means that the length of the turnbuckle can be adjusted from 5 inches to 6.5 inches, By tightening the turnbuckle to generate tension, which can make your shade sails stable..
  • High load carrying capacity, and stainless steel has rust-proof properties, so it is especially suitable for outdoor use..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock

OLSON SAW CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks

  • An innovative feather board design that provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts.
  • Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences.
  • Includes sturdy spacer for tandem Feather Board operations.
  • Dual slide motion - Side to side and forward action for quick and easy setup.
  • Unique pre-load tension Design - quickly set tension for consistent cuts while reducing the chance of kick-back.
  • Split rail miter bar construction - provides maximum hold.
  • Mounting Hardware Included for nearly any dual or tandem application - 3/4-Inch and 5/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences.
  • Includes sturdy spacer for tandem FeatherBoard operations.
  • Dual Slide Motion - Side to side and forward action for quick and easy setup.
  • Unique Pre-Load Tension Design - Quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Antsky T316 Stainless Steel (Marine Grade) Wedge Anchor Bolt (3/8\×3-1/2\

  • 【Marine Grade】Antsky wedge anchor bolts are made from high quality 316 STAINLESS STEEL, it's rust resistance, can last long in wet and humid environments；.
  • 【Diameter】The OD of the anchor is 3/8'', the total length is 3-1/2" , the length of the threads on the anchor is 2"；.
  • 【Black Painting】Our anchor's surface is electric painted into black colour, which is special made for longer working life and stylish looking；.
  • 【Application】This anchor is designed to use in concrete、rocks etc. base material；.
  • 【Note】The anchor requires a pre-drilled hole in the base material, which must be same size as the OD of the anchor, we suggest to use a 3/8'' drill bit..
Check Stock

5.5'’ Color Guard Flag Pole Package by Director’s Showcase (DSI) (5.5' Silver Flag Pole, White Caps)

  • The Color Guard Flag Pole Package includes everything you need to custom balance your flag pole for the perfect spin.
  • Package includes one 5.5' aluminum flag pole, 1 (pair) of brass weight anchors, 4 individual weight anchor bolts, and 1 (pair) of rubber end caps.
  • The patent pending design of the flag pole weight anchor system allows you to quickly and easily change the balance and spin of your flag pole.
  • Flag pole is constructed from 1” diameter light weight, high strength aluminum with scratch resistant, high gloss hard anodized finish.
  • Each package includes one of each of the following weight anchor bolts: 1.5" (1.4oz), 2," (1.7oz), 3" (2.2oz), 4" (2.8oz).
Check Stock

TOVOT 77PCS Wall Anchor Setting Tool Heavy Duty Hollow Wall Anchor Tool with 5 Sizes Molly Bolts Hollow Drive Wall Anchor Screw Kit (M4 M5 M6)

  • 【Practical Anchor Tool】: The setting tool with semi-automatic design can well finish the work of nailing bolts. The tool can be more comfortable with non-slip rubber material handle, and suitable for different types of bolts, heavy duty and reliable..
  • 【Widely Applications】: The setting tool set can be used as a fixed connection on hollow walls, plasterboard, and wood panels, suitable for mounting curtains, hanging pictures, and fixing shelves. The structure of the bolt is stable, heavy duty and not easy to break..
  • 【High-Quality】: The material of the wall anchor setting tool is  zinc plated carbon steel, which is water-resistant and highly hard, not easy to rust and deform by long term use..
  • 【Package Content】: The kit contains 1 metal hollow wall anchor tool, 76pcs, 5 seizes carbon steel molly bolts: 20pcs×M4×32mm, 20pcs×M4×38mm, 12pcs×M5×52mm, 12pcs×M6×52mm, 12pcs×M6×65mm..
  • 【Installation】: Equipped with anchors setting tool, easy to use and save time. Sufficient quantity and rich size for interior decoration use, plastic handheld work box, easy to car....
Check Stock

COSCOOL Sun Shade Sail Hardware Kit Stainless Steel Anti-Rust for Outdoor Patio Rectangular/Square Shade Sail Installation, 6 Inch

  • A set of shade sail hardware kit for RECTANGULAR/SQUARE shade sails includes Turnbuckle(2pcs), Pad eye(4pcs), Carabineer/hook(2pc),Screws(16pcs),expansion anchor bolts(16pcs),and a installation manual..
  • Stainless steel(304) hardware kit for Rectangle/Square sun shade sails installation..
  • 6 inches means that the length of the turnbuckle can be adjusted from 6 inches to 8 inches, By tightening the turnbuckle to generate tension, which can make your shade sails stable..
  • High load carrying capacity, and stainless steel has rust-proof properties, so it is especially suitable for outdoor/patio/garden use..
  • This Shade Sail Hardware Kit is suitable for rectangular, square, triangular sun shade sail installation. It is easy to use. You can install your shade sails between trees, walls or wherever you want..
Check Stock