Categories

Best Terminal Clamp

VGEBY Wiper Puller, Windshield Wiper Removal Tool Heavy-Duty Battery Terminal and Wiper Arm Puller

  • TOP QUALITY: After professional technical testing and improvement, Windshield Wiper Removal Tool can give you the best choice..
  • PROFESSIONAL: Remove battery terminal clamp without damage to battery post..
  • CONVENIENT: Removes stuck battery terminals,tighten knurled cone to force jaws under the cable clamp,turn center screw to lift clamp off terminal.
  • MULTIFUNCTION: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • GUARANTEE: If you have any problem with this product, you can take advantage of our 180 days warranty. We will change or refund for any reason..
Check Stock

Battery Terminal Connectors, Quick Release Battery Terminal 2PCS for SAE/JIS Type A Posts, 4 Way Positive Negative Car Connector Automotive Battery Cable Wire Terminal Replacement Accessories

  • Car Battery Terminal Connector: This package includes positive and negative battery terminal connectors (2PCS in total) with 4 terminals for wiring, It is also equipped with an Allen wrench for easy disassembly and use..
  • Battery Connectors: Suitable for wires with a diameter of 5.2-7.4 mm (AWG size 1-4) or a cross-section of 16-35mm². Minimum wire diameter: 16 mm (5/8 inch). Maximum wire clamp: 9.5 mm/0.37 inch, mini wire clamp: 6.5 mm/0.25 inch..
  • Rugged and Durable: The battery terminals are made of tin-plated copper and stainless steel screws, which have good electrical conductivity and wears resistance, which can reduce voltage distortion and transmission loss..
  • Wide Range of Applications: Quick disconnect battery terminal suitable for SAE/JIS A type pillars for circular pillar automotive batteries. Positive and negative battery terminal connectors can be used in cars, vans, caravans, RVs, truck batteries, etc..
  • Easy to Identify: The quick release battery terminal has a red positive "+" and a black negative "-.
Check Stock

SINGARO Car Battery Terminal Connector, 4 Way Positive and Negative Pole Quick Release Terminal Clip, Applicable to SAE/JIS A Type Terminal Post, Compatible with Cars, Trucks and More（Gold-A）

  • High-Quality: Made of tinned copper, it has 4 ports for multiple cable connections, with good electrical conductivity and corrosion resistance, mainly used for SAE / JIS TYPE A rear car battery..
  • Widely Applicable: Our battery terminal connectors suitable for cars, vans, motorhomes, caravan, truck batteries, etc. Please be sure to connect correct terminal to correct polarity..
  • Size: For wires diameters 5.2 – 7.4mm (AWG gauges 1 – 4). Minimum wire size: 16mm (5/8″). Max wire clamp: 9.5mm/0.37in, mini wire clamp: 6.5mm/0.25in. Positive inner diameter: 17.5~19.1mm, negative inner diameter: 15.9~17.5mm..
  • You Well Get: Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 4 Terminal block , 1 Battery Terminal Cleaners, 2 battery anti-corrosion washers and a hex wrench..
  • Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here..
Check Stock

4 Pieces Battery Terminal Connectors 4 Way Battery Terminal with Hex Wrench Quick Release Disconnect Car Battery Terminal Copper Car Battery Terminal Positive Negative for SAE (Gold)

  • Package content: package includes 4 pieces battery terminal connectors, namely 2 pieces positives and 2 pieces negatives, and 2 pieces hex wrenches are also included, sufficient to meet your daily requirements of usage and replacement, bringing convenience to you.
  • Quality material: the quick release disconnect car battery terminal is made of pure copper with tin-plated, sturdy and firm enough for long term usage, and it would not deform or corrupt easily.
  • It has good electrical conductivity, thus it can decrease voltage distortion and transmission loss.
  • The hex wrench is made of stainless steel, which is stable for you to use.
  • Positive and negative labels: these copper car battery terminals have labels for you to recognize which one is the positive and which one is the negative.
  • Positive has a red label, and negative has a black label, helping you connect the correct terminal for the correct polarity.
  • Detailed sizes: in these battery terminal accessories, the inner diameter of the positive battery terminal connector is 17.5-19 mm/ 0.69-0.75 inch, the inner diameter of negative battery terminal connector is 15.9-17.5 mm/ 0.63-0.69 inch, the max wire clamp is 9.5 mm/ 0.37 inch, the mini wire clamp is 6.5 mm/0.25 inch, the minimum wire size is 16 mm/ 0.63 ....
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...able (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
Check Stock

J Bryant Gym Machine Accessories for 5mm Cable Ball Stopper Interface Port Components Fitness Equipment Wire Rope Port Joint Replacement Parts for Home Gym Machine Use

  • SIZE: The ball is 4cm diameter, with 1cm hole. The bowl-shape plate has a 38mm diameter, with 7mm hole. The metal eyelets terminal is used for cables with a diameter of 5mm and an internal steel wire diameter of about 3mm. The wire rope clamp is for a 5mm rope or cable..
  • DURABLE MATERIAL: The ball is made of high quality plastic, the bowl-shape plate is made of metal alloy. The eyelet terminal is made of metal alloy. The wire rope clamp and thimble are made of 304 stainless steel..
  • USE: Use a hydraulic crimper (plier) tool to link the cable with the metal eyelet terminal. The ball, bowl-shape plate and the terminal.
  • you can use as ball stopper set on cable machine. Put the wire rope thimble together with the clap and cable, it can use as clothesline or fence line, the thimble and clamps are wear-resistant..
  • You can choose the appropriate connector type according to the training equipment or sports environment, which is convenient and practical..
Check Stock

2Pcs Battery Terminal Connectors, 4 Way Positive Negative Car Battery Terminals Clamp Connector Quick Release Disconnect for SAE/JIS Type A Posts, for Marine Car RV (yellow)

  • Dimension - For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in..
  • Easy to use -The battery post terminals connectors are easy to identify with positive (red) and negative(black) labeled. Comes with 1 hex key for easy installation. Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
  • 4 Way Battery Terminal -The SAE battery terminals connectors has 4 posts for wire connection. Designed for multiple cable connections, mainly used for SAE / JIS TYPE A rear car battery..
  • Sturdy & Durable - The quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss..
  • Wide Application - Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck, Marine Batteries,etc. Just make sure to connect the correct terminal for the correct polarity. Works great with good electrical conductivity and corrosion resistance..
Check Stock

LotFancy Battery Terminal Connectors, 0/2/4/8/10 Gauge Positive Negative Battery Terminals for Car Audio, Marine, Truck, Boat, Motorcycle, with Spacer Shims, Covers, Wrench Tools, 1 Pair

  • 【Four Wire Outlet】Two 0/2/4 Gauge Inputs and two 8/10 Gauge Inputs. Designed for multiple cable connections. Wiring is easy to modify. Suitable for Most Battery models.
  • 【Positive Negative Terminal】Our positive Terminal is designed for a 17.5mm tapering post.
  • Negative Terminal is designed for a 15.9mm tapering post. Please confirm the tapered post size before purchasing. Our terminal connectors only work with standard top post tapered terminal, NOT include JIS Pensil Post.
  • 【Clamp Wires Tightly】The connectors are held in place with a screw and make a tight and secure connection. Easy to install and only requires two Alan wrenches.
  • 【Sturdy & Durable】 Zinc Alloy and Copper Material for Strong Electrical Conductivity, Super Corrosion Resistance, Reduce Current Transmission Loss. Also protects battery posts from corrosion for extended battery life.
  • 【Package Includes】2 x Battery Terminal Connectors, 2 x Adjustable Shims, 2 x Protective covers, 4 x Alan Wrenches. The provided Alan wrenches make for easy installation. The clear plastic covers clips on securely to protect the terminal.
Check Stock

BTSHUB Engine Timing Light Xenon Vehicle 12V Ignition Inductive Strobe Timing Light Tool Compatible for Car Motorcycle, Marine, Lawnmower

  • 【Wide Applicatons】: Design to re-timing your car's ignition to get the best performance that you can. Suitable for car, vehicle motorcycle, marine, all two-stroke, and four-stroke gasoline engines, easily operate on 12V ignition systems.
  • 【Professional Tool 】: Solid-state burnout-proof polarity with automotive reverse, it is polarity and overload protection. It`s sliding clamp-on inductive pick-up, for easy and safe hookup.
  • 【Pistol Grip Design】: Handle pistol-type design conforms to the engineering design, the button is comfortable, feels good, facilitates the operation.
  • 【Sensor Clips】: The sensor clip is red and black to distinguish positive and negative poles, easy to use, and more secure. And the color of the wire is also different to prevent the glue sleeve of the clip to come off and difficult to distinguish.
  • 【 How to use】: (1) Switch off the engine of your car, (2) Clamp red clip to the positive terminal of the car battery, (3) Clamp black clip to the negative terminal of the car battery, (4) Connect the largest clip directly to the wire of #1 spark plug wire.
Check Stock

10Pcs Electrical Connectors, Lever Nut, Wire Block Clamp Terminal 3in6out Color Quick Wiring Electrical Connectors LT633

  • [Wire Block Clamp Terminal]: Product material: ABS.
  • Stripping length: about 11~12 mm/0.4~0.5 inches.
  • [Easy to use] As a color button wire connector, this terminal is easy to use. The 3-in-6-out quick-connect terminal is made of high-quality materials and has strong practicability..
  • [Safe and reliable] The product is easy to operate and insert, safe and reliable. The terminal block has high performance according to strict rules..
  • [Impact resistance] The color button line connector is made of ABS material, which is impact resistant, scratch resistant and environmentally friendly..
  • [Simple operation] The wire connector terminal is easy to insert, safe and reliable, stable in performance, compact in appearance, light and portable, does not take up space, and can be placed anywhere..
Check Stock

ATPEAM Battery Terminal and Wiper Arm Puller Remove Tool Heavy-Duty Arm Bearing Remover Puller Repair Tool Kit 6-28 mm

  • Great Material: Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Size: Jaw opening: 1/16" - 1-1/16" (6-28mm).
  • Easy to Use: Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling..
  • Multifunction: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • Package Included: 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.
Check Stock

2PCS Battery Terminal Connectors 4way Positive Negative Battery Clamp car Terminals Connector Battery Terminal Quick Release Disconnect for SAE/JIS Type A Posts with Terminal Cleaning Brush(Silver)

  • 【Easy to Use】 With positive and negative labeled, easy to identify. 1 hex key provided for easy installation. Quick disconnect. After installing battery, connect to the battery posts by pressing down the lever, so no tool needed..
  • 【Convenient and Firm】 The Battery Terminal has 4 way terminals, designed for multiple connections. Wiring is easy to modify. Convenient wiring and firm connection..
  • 【Made of High Quality】 The Battery Terminal Connectors are made of tinned copper, which is corrosion resistant, with good electrical conductivity.
  • 【Dimension】 For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. Positive inner diameter: 17.5~19.1mm, Negative inner diameter: 15.9~17.5mm..
  • 【Wide Application】 Fits on round post auto batteries SAE/JIS Type A posts. The positive and negative battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Note：If you receive defective parts, don’t worry, please tell us immediately, we will give you the perfect solution！！.
Check Stock

LotFancy Battery Terminal Connectors, 0/2/4/8/10 Gauge Positive & Negative Car Audio Battery Terminals with Spacer Shims, Auto Car Marine Boat Terminals Replacement, 1 Pair

  • 【Four Wiring Outlet】Two 0/2/4 Gauge Inputs and two 8/10 Gauge Inputs. Designed for multiple cables connection. Easy to modify the wiring.
  • 【Clamp Wire Tightly】The connectors are held in with a screw and make a tight and secure connection. Easy to install and only required two Alan wrenches.
  • 【Positive Negative Terminal】Our positive Terminal is designed for a 17.5mm tapering post And (-) Negative Terminal is designed for a 15.9mm tapering post.
  • 【NOTE】Please confirm the tapered post size before purchasing. Our terminal connectors only work with standard top post tapered terminal, NOT include JIS Pensil Post. (JIS pensil posts are visibly narrower at 13.1mm for negative post and 14.7mm for the positive).
  • 【Sturdy & Durable】 Zinc Alloy and Copper Material for Strong Electrical Conductivity, Super Corrosion Resistance, Reduce Current Transmission Loss. Also protect battery post against corrosion for long battery life time.
Check Stock