Categories

Best Terminal Clip

Fluke TLK281 SureGrip Automotive Test Lead Kit

  • Kit includes (1) insulation piercing clip set, (1) suregrip silicone test lead set, (1) suregrip test probe set.
  • Also includes (1) suregrip alligator clip set, (1) suregrip large jaw alligator clip set, (1) soft case.
  • Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay.
  • The large jaw alligator clips to get a good ground on the engine or to connect to the battery terminals.
  • An extra long set of alligator clips easily grip to the alternator bat terminal or the S terminals.
Check Stock

UOHGDPY DIN Rail Terminal Blocks,Universal Compact Wire Wiring Connector (40 pcs connectors+4 pcs Article in Parallel+4 pcs Digital Identification+2 pcs Fixed clamp+40 pcs Screw)

  • 【Easy to Use】The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time..
  • 【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 40pcs 12AWG terminal blocks, 4pcs connection bar, 4pcs digital identification, 2Pcs Fixed clamp,40pcs screws, 2pcs end stopper bracket and a transparent storage box..
  • 【Universal Compatibility】 This Wire Connector is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm² /28-12 AWG, flexible wire 0.5-2.5mm² /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc..
  • 【Premium Quality】Terminal blocks, high quality brass metal body and the best flame retardant insulating material modified nylon PA66 shell, it has a long life, no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail..
Check Stock

Direct-Lighting H System Track Adapter with Hook H870-WH (White)

  • H system, 3-wire-1 circuit track system. 120V single circuit track..
  • H system : 2-clip terminals on one side,1-clip terminal on the other side. 15/16-inch if measure from tip to tip..
  • Accepts chain hung fixture, can hold up to 20 lbs..
  • RATING : UL Listed. Rated for Indoor use or Dry locations..
Check Stock

Weber 67532 Igniter Kit, Genesis II 330/335

  • Weber 67532 Igniter Kit for Genesis II 330 and 335 Grills Manufactured in 2019.
  • Includes: Ignition module, 6 terminal (1) Electrode, 36″, black (1) Electrode, 27″, yellow (1) Electrode, 46″, green (1) Electrode, 32″, red (1) Ground wire, 38″, blue (1) Sideburner wire, 38″, white (1) CLIP WIRE SADDLE SLF ADHSIVE NTRL GP 19 1 SWITCH MOMENTARY IGN CHROME/GRY GP 17 1 WIRE ASSY IGN LOW VOLTAGE C1 3B GP 17 1 SCREW 1/4-20 X .625 DP HH MAGNI 510 OUS 1 SCREW 6-32 X 1/4 PPH SS 1 ELECTRODE SUM S/B ’03 1 ELECTRODE CLIP SUM S/B ’03 1 INST IGN MDL/ELECTRODE OC GEN 19 ENG 1.
Check Stock

Microchip Reader RFID 134.2Khz, Pet ID Microchip Scanner with 0.91 Inch High Brightness OLED Display 128 Pieces of Tag Information Storage for Animal Tracking

  • CASEMATIX protective travel case for select terminal card reader, receipt paper and accessories includes water resistant case only.
  • Keep Your card reading terminal secure and bring it anywhere – built-in rubberized carry handle, stylish purple exterior and removable turquoise shoulder strap make it fun, portable and safe.
  • Padded internal protection with egg crate foam bottom keeps the portable credit card scanner protected always and easily accessible with dual zippers and rubber pull tabs.
  • Soft foam bottom absorbs impacts while the padded middle divider separates the accessories from the point of sale unit. The bottom compartment fits your credit card machine and paper rolls in 7.0” x 4.5” x 3.0” of usable space.
  • The premium nylon adjustable shoulder strap is included and can be removed in seconds using the metal easy clip hardware. Exterior dimensions measure 8.0” x 6.0” x 4.0” – INCLUDES CARRY CASE FOR POS TERMINAL ONLY.
Check Stock

Timing Light 12V Ignition Timing Light Automotive Strong Flash Timing Lights with Sliding Sensor Clip,Long Test Lead, Reverse Polarity Protection, Overload Protection for Car, Motorcycle Petrol Engine

  • ... device or affecting the car or battery in the event of mis-operation. Timing light also has overload protection. If the current or load is too large during the operation, timing light will automatically disconnect the current to protect the battery and device..
  • 【Easy Operation】Clamp the red clip to the positive terminal of the vehicle's battery. Clamp the black clip to the negative terminal. Hook up the spark plug sensor clip to the high voltage line of the No.1 cylinder. Note: The arrow on the sensor clip should point to the direction of the spark plug to work properly..
Check Stock

WB17t10006 Terminal Block Kit Compatible With Surface Burner Receptacle Kit (2 pack)

  • FITS:Surface Burner Terminal Block Kit WB17T10006 Used for Ge Stoves Using Wb30t10074 & Wb30t10078 Ers30t10074 & Ers30t10078 Or Wb17t10006.
  • MODEL NUMBERS:Surface Unit Connector Kit for older part numbers on Ranges : WB17T10009, 1038747, WB17K10003, WB17T10001, WB17X10007.
  • PAKAGE INCLUDES:Electric Range Element used for GE brand on Stove / Oven / Ranges. Kit includes the female contact with wires, terminal block and mounting clip.
  • SYMPTOMS: Shorts out, corroded or arced causing the element not to work. (Tools needed: 1/4" nut driver, needle nose pliers, knife, electrical tape, zip tie).
  • COMPATIBLE:This is non-original aftermarket part but It made exactly fit for General Electric StoveThe product is not sponsored or endorsed by,or affiliated with the brands it fit,including GE/Hotpoint/RCA/Sears..
Check Stock

uxcell 3pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Long

  • Package Content: 3pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 10pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Length

  • Package Content: 10pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

Direct-Lighting H System Single Circuit Pendant Track Adapter - for 120V Pendant with Wire Cord 2 AMP H880-BK (Black)

  • H System Single Circuit Pendant Track Adapter - for 120V Pendant.
  • For 120V, H system Single circuit 3-wire track..
  • H System : 3-wire-1 circuit track system. 2-clip terminals on one side,1-clip terminal on the other side. 15/16-inch if measure from tip to tip..
  • Accommodated 120V Line Voltage Pendant with wire cord with 1/2-inch diameter.
  • UL Listed. Rated for Indoor use or Dry locations..
Check Stock

BYNIIUR 88 Pcs Trim Removal Tool, Fastener Remover Tool Kit Automotive Interior Plastic Pry Kit, Car Door Panel Tool Radio Auto Clip Pliers Removal Tool Kit, Red

  • UNIVERSAL AUTO TRIM REMOVAL TOOLS: High quality terminal removal tool kit is suitable for automotive, boats, RVs, trucks or furniture trim removal and installation, including: car audio/radio, door panels, window trims, clips, fasteners, automotive interior repairing and furniture restoration..
  • 8 KINDS OF BUMPER RETAINER CLIPS MEET YOUR NEEDS: Push retainer pin kit with 8 kinds of common style made of impact-resistant nylon fiber material with matte surface treatment, which would not break or crack easily during use, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more..
  • ADHESIVE CABLE CLIPS FOR CARS: Cable clip organizer attaches to a smooth surface firmly, helps you organize the cable of the car. Self-adhesive, easy to use, creative approach is available as you like to utilize them.
  • ERGONOMIC DESIGN: Made of sturdy and durable nylon material, it has a unique ergonomic design which can easily hold the tool, great for effectively saving workload and time when performing tedious repairs or maintenance tasks..
  • AUTOMATIVE TRIM REMOVAL TOOLS KIT INLUDING: 40 x Car Retainer Clips,4 x Precision Hook Picks,6 x Stereo Removal Tools,10x Adhesive Cable Clips,12 x Car Trim....
Check Stock

uxcell 7pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

  • Package Content: 7pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 3pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

  • Package Content: 3pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock