Categories

Best Test Data Accuracy

Proster LCR Meter LCR Multimeter Tester for Capacitance Resistance Inductance Measuring Meter with LCD Over-range Display

  • Proster LCR Meter: inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading....
  • High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5).
  • (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty....
  • Rotable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation..
  • New Version Test Leads: Comes with crocodile clip/ Test Loads/ mini Alligator Clip.
  • The black pen is connected to the negative pole and the red test....
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Wheel-Operated Manual Push Pull Test Stand Stroke 180mm/7\ with Digital Scale and HJJ-001 Clamp x2 (HLD Test Stand+HP-500N)

  • ...LACEMENT SCALE - This HLD Test Stand has a digital displacement scale (no output function), which can help you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm.
  • GAUGE PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: Input (AC 100-240V 50-60Hz), Output (DC 5V 0.5A) | 2 sets of Installation Dimensions: 4-M3 (30*145mm), 4-M4 (40*90mm).
  • TEST STAND PARAMETERS - Model: HLD Wheel-Operated Test Stand | Stroke: 180mm/7.0in. | Mounting hole: 4-M3 (30*145mm), 4-M4 (40*90mm) | Maximum load: 1000N/100kg | Please feel free to contact us with any questions..
Check Stock

AMTAST Colorimeter Color Difference Meter 8MM Digital Precise Color Analyzer Coating Printing Testing Device

  • AMT599 is the most commonly testing device used in Lab or many different industries.
  • Display accuracy is 0.01, repeated test accuracy △E deviation value is below 0.1..
  • Multiple color space display color values : L*a*b、L*c*h、Yxy.
  • Extremely short measuring time about 0.5 seconds.
  • We provide free management software to help you control the color data. It can automatically convert measurement data.
Check Stock

Digital Force 100K Meter Gauge Pull & Push Magnitude Test Tester Newton Meter N/kg / lb/g Measurement for Manufacturing, Electronics, Building Hardware, Textile, Auto Parts

  • Force Range: ±100kgf / ±980N / ±220Lbf (3 measurement unit for selection and conversion, kg, N, lb. ).
  • Simple and convenient multifunctional instrument for high-accuracy push force and pull force test, push and pull load test, plug and unplug force test and destructive test..
  • With data memory and output function. Can memorize 99 groups of data and transmit to computers by USB cable (Not included) or Bluetooth adapter (Not included) for further analysis..
  • Being installed with a variety of test bench and fixture, and come with different tips and hooks, it is an ideal test machine for different uses..
  • Digital display & quick response with no guessing or errors..
Check Stock

D YEDEMC Mini-Pro 1310/1550nm SM OTDR Mulit-Function Tester Built in OPM/OLS / RJ45 Test/VFL Test Rang 5m-60Km Dynamic Range 24dB/22dB Connector UPC with FC/APC-FC/UPC-SX (YD-3000-UPC)

  • ...ing the Analysis Software open print the test result and print).
  • Please make sure you are a professional before purchasing. If you can't test, please contact us. Our products have been strictly tested before leaving the factory and will not be unusable. Because of the accuracy of the product, some scenarios cannot be used. You need to buy products with higher accuracy, not because our products have problems..
Check Stock

The Equalizer

  • High accuracy measurement. As the device with high accuracy and clamp rail, and fixed equipment after the every time are the same, and with the guide rail can be made with the mining model in parallel, so the measurement result error is small, small fluctuation dynamic error..
  • Design of the four sides of the air, effectively alleviate the impact of airflow test. Improved stability and accuracy. The display surface and the operation buttons are in front, and it is very convenient to operate and view the test data..
  • Mini size is easy to carry. Simple and easy operation. Function is more abundant. Not only can measure the speed, but also can measure the energy, at the same time can record up to 40 groups of speed and the 40 group of the energy value..
  • Multiple power management and protection. The cell has the function of over charging, over discharging and short circuit protect, and the integrated intelligent shutdown and low power shutdown function..
  • The panel is mainly composed of digital display tube, function, key and LED indicator. The function key is the micro touching button..
Check Stock

PH Meter, TDS PPM Meter, Soild PH Tester[Upgraded Version], 3 in 1 for Home Water and Garden Soil Use

  • [Package]: - 1 PH Meter(yellow) +1 TDS & EC Meter (white)+1soil tester kit (green). Total is 3 PCS..
  • [Functions]: - The digital PH meter is equipped with Temperature detector and PH tester function. TDS meter can tester water purity level, which show on the screen in PPM (parts per million). The soil meter can test the pH,light, moisture of soil, to help grow your plant more easy..
  • [Quick and accurate]: - th ph and tds tester can test quickly and accurately within ±0.02. It only takes a few seconds to show accurate data on the screen..
  • [Easy to use]: - ph tester and tds meter have sensitive electrode sensor ,simply press "ON". It only takes a few seconds for your result to appear the data on screen. Soil test kit just need to insert the probes into the soil about 4-6 inches, and wait for about 10 mins to read the accurate data..
  • [Widely use]: - These meters are designed small and convenient. PH meter and can test pH balance,TDS meter can test water ppm ideal for testing drinking water, swimming pools, hydroponics, and more. Soil tester is applicable to plants, garden, lawn and farm.(Kindly note: Please clean and dry the probe with clean water after each use, as any water or matter left on the probe will affect the accuracy of the next test).
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with USB Output 500N/110Lbf/50Kgf Force Meter with Auto Power-Off, Auto Backlit LCD for Lab Tension and Compression Destructive Tests HP-500N

  • ...ours, and each charge cannot exceed 12 hours..
  • 3 MEASUREMENT MODES - This pull gauge can switch three measurement modes (Real-time/PEAK/AUTO-PEAK). In "PEAK" mode, it can hold the maximum force applied shown on the screen..
  • PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: Input (AC 100-240V 50-60Hz), Output (DC 5V 0.5A) | 2 sets of Installation Dimensions: 4-M3 (30*145mm), 4-M4 (40*90mm).
Check Stock

Yellow Jacket 49017 Digital Refrigeration Gauge

  • ...uipped with a hook that allows you to hang the gauge on the car without holding it all the time. Besides, it is equipped with refrigerant hoses and temperature sensor clamps for better use. Connect the temperature clamp to measure the temperature. The burst pressure of the hose set is 3000 PSI..
  • 【How to Verify The Accuracy of The Temperature】The temperature measured by the HVAC gauge is allowed to deviate by 3% from the actual temperature. There is a simple way to verify the accuracy of the temperature: Take out the black wire on the temperature clamp and put it in the boiling water. If the temperature is 100 degrees Celsius or the error is plus or minus 3%, it is normal..
  • 【Note】According to the current level of hardware processing in the industry, it is difficult to achieve a 100% completely sealed valve on the market. The sealing degree of our guage hardware can only reach 99%. But these slight leaks will not affect the use..
  • 【Warmly Note】Before using the HVAC guage, please make sure that refrigerant hoses and temperature sensor clamps are connected properly. Poor connection of the temperature sensor clamps will make it impossible to read the temperature. Poor connection of the refrigerant hoses will cause refrigerant leakage..
Check Stock

Blood Glucose Monitor Kit, 100 Counts 30 Gauge Lancets, 100 Blood Test Strips and Carrying Case, Lancing Device, Control Solution, No Coding

  • Highly Accurate: Our blood glucose test kit has conducted research on blood glucose from lots of people and obtained more test results. The coefficient of variation (%) of intermediate accuracy and repeat accuracy is less than 5%..
  • Reduce Infection and Painless: Blood sugar meter can auto pop out the test strips and lancets with no manual processing, reduce infection. Lancing device has 6 different depth options can reduce pain.
  • Large LCD screen is easy to view results..
  • Better Data Management: Glucometer memory storage up to 450 readings and display continuous 14/21/28/60/90-day average. 4 modes: pre meal, post meal, any time of the day and testing. It will help you track and manage your blood glucose..
  • Fast And No Coding: Glucose monitoring kit with strips can automatic recognition, no coding.
  • Test Strips just need 0.5 μl blood sample, the results will show within 5 second..
  • What You Get: 1 diabetes test kit, 100 30G lancets, 100 test strips, 1 lancing device, 1 battery, 1 glucometer control solution, 1 carrying case, 1 owner’s manual, 1 quick start guide..
Check Stock

Handheld Anemometer HVAC Anemometer RQ-866A, Air Flow Meter CFM Meter with USB Connect to PC, Wind Meter for Measuring Wind Speed Temperature/Air Flow/Humidity for HVAC Vents, Drone Flying. Hunting

  • 【Transfer Data Via USB】 RQ-866A can realize data synchronization on the PC side through USB, and can display data and generate icons on the PC side to facilitate analysis and save data..
  • 【Multi-function CFM Anemometer】 RQ-866A CFM Anemometer can measure wind speed/ wind temperature/ air flow/ humidity/dew point.Lightweight and easy to carry, the screw hole at the bottom can be fixed on a tripod for measurement..
  • 【High Sensitivity and Accuracy】Wind speed range:0.3~40m/s.
  • Accuracy of wind speed:±(2%rdg+50dgts)..
  • 【Easy to Use】RQ-866A comes with a large backlit screen, which can read clearly at night, automatically switch the machine, low battery reminder function, save your battery.Multiple measurement functions, multiple units can be switched, suitable for sailing, fishing, climbing, etc..
  • 【Wind Temperature Test Tips】The temperature sensor is located in the small holes on the left and right sides. Please make sure that the wind can pass through the small holes on both sides, otherwise the measurement data will not be accurate..
Check Stock

YXMY2020 Benchtop Digital Resistance Tester AT527 AC Low ohm Meter Battery Internal Resistance Meter for Testing Various Electronic Components

  • This instrument can test 0.0001mΩ~3.3kΩ resistance, 0.00001V~400.000V DC voltage, maximum resistance 33000 display digits, and maximum voltage 800000 display digits. The AT527/527B combines high-precision, high-resolution and ultra-high-speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 70 times per second..
  • The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay..
  • The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, comes with database function and Excel..
  • The export function can be effectively applied to remote control and data acquisition and analysis..
Check Stock

Multi Channels Digital Industrial Thermometer Temperature Data Logger (AT4716)

  • Test range: -200 ° C ~ 1800 ° C Resolution: 0.1 ° C Accuracy: 0.2% ± 1.
  • AT4808 handheld multi-channel temperature meter adopts high-performance ARM micro processor, can collect multi-channel temperature data simultaneously and response quickly..
  • AT4808 has the function of checking broken thermocouple, high/low beep function and communication transmission. 128 channels temperature data can be extended, compatible with various temperature sensors. Equipped with Mini-USB (virtual series port) interface to realize data acquisition, analysis and print through the standard computer software. Support USD disk storage, real-time sampling data storage. The users can adjust data for each channel independently..
Check Stock