Categories

Best Textile Leather Engraving Machine

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

Creality CR Laser Falcon 10W Laser Engraving Machine Compressed 10000mm/min Laser Spot 0.06mm Stainless Steel DIY Laser Cutter for Wood Acrylic by LaserGrbl Lightburn for Windows MacOS 15.7x16.3 inch

  • PROVEN 3D CORE TECHS OF CREALITY ENDER PRINTERS: Creality desktop Laser engraving machine for beginners still proven 3D Core Techs of Creality Ender Printers (Proprietary Drive Algorithm+Stable Motion Solution+Modular Design+Quiet Running Solution). The improved 6-lens array compresses the focal spot to only 0.06 mm. It will deliver more details in your engravings, which can cut through 12mm woodboard with one pass, even can cut through up to 18mm woodboard within 3 times..
  • ONE-BUTTON OPERATION: In the offline working state for Creality laser engraver 10W, a single button to preview, start, pause or stop engraving. The integrated LED indicator will signal the status clearly..
  • 3 STEPS FOCUSING: Loosen the laser module screw of Creality Laser engraving machine for home use 10W, slide the module until its protective cover touches the focus block, and tighten the screw..
  • QUICK TO ASSEMBLY AND OFFLINE ENGRAVING: 60% of the components are modularized  for easier assembly. : Import a file via a TF card . Use it indoors, outdoors or anywhere you like without connection with a computer..
  • LARGER WORKSPACE: With 400x415 workspace, Creality large Laser machine allows users to process a larger piece of material at a time. (Optional raisers) Optional ....
Check Stock

Akozon Engraving Machine Laser Head Laser Diode for NEJE 1500mW Laser Engraving Machine Accessories Blue and Purple Light Adjustable Focus Mini

  • Compatibility: This blue-violet laser head is specially designed for engraving machine, which is a perfect replacement for NEJE 1500mW engraving machine. Used directly for laser positioning, measuring, pointing and sensing devices..
  • High Performance: It is widely used in materials required by industries such as hardwood, plastic, bamboo, rubber, leather and paper cutting. Easy to adjust, high speed, high precision, high stability and high efficiency..
  • Stable and Durable: This engraving head can be used for a long time, the engraving time is much longer than other laser heads, and more stable. But make sure the surface of the object to be engraved is horizontal and the laser is focused on the surface of the object..
  • Object Engraving: Engraving: Rubber, Hardwood, Bamboo, Paper, Cardstock, Stamp, Leather, Flammable Plastic, PCBA, or other flammable materials. Examples include cell phone cases, mice, pencils, business cards, wallets, wood, plastic combs, small wooden frames. Can not engrave: metal, acrylic or other flame retardant materials (transparent material can be engraved after painting)..
  • Note: The current is controlled by the driver board. The driver board is constant current. The laser can increase power by overclocking. However, it is not r....
Check Stock

ZAIONE 5pcs/Set 11.8

  • Metal products /Ceramic /Plastic /Wood products /Clothes with a waterproof coating can not be printed..
  • USAGE-1.Put the heat transfer vinyl on carving machine,and adjust the pressure and velocity2.Select the image that you want to print in computer,and select mirror image,then click on button of engraving3.Cut the carved patterns from the film,and tear off the parts that you don't need,a picture is ready for using4.Put the carved patterns on the clothes.Print the image by a heat transfer machine with temperature of 150 for 5-10 seconds,and peel off the transparent protective film,then done..
  • WASH INSTRUCTIONS - 1.Turn garment inside out..
  • 2.Machine wash cold with mild detergent..
  • 4.Dry at a normal dryer setting on household machines (Do not dry clean)..
  • 5.Instructions apply to the material only, please follow garment washing instructions as well..
Check Stock

LaserPecker 2 Laser Engraver, Laser Engraving Machine with Roller Portable Laser Engraver Cutter Compact Desktop Handheld Laser Etching Machine for Cork Leather Coated Metal Brushed Stainless Steel

  • & : Laser runs Max speed 36000mm/min, 0.05mm laser spot create more details, plus 3 resolution options 1k/1.3k/ 2k provide perfect details level. Frame/Graphic preview speed up to 225000mm/min..
  • : Plug and play, sets up in seconds and works with Smartphone / PC to transfer images, keep 11cm (4.3in) Laser Distance and correct power/depth, you can begin engraving with a few clicks..
  • ☃️° / : With the 3rd Axis(Roller), LaserPecker 2 Laser engraver can do 360° rotary engraving on cylindrical, engraved surfaces such as tumbler / pencil, as well as mobile engraving, max 100x2000mm engraving size..
  • & : LaserPecker 2 laser engraving machine CAN Engrave: Cardboard/Wood/Leather/Acrylic/Oxidized Aluminum/Brushed Stainless Steel etc. CAN’T Engrave: Gold/silver/Copper/Brass etc. CAN Cutting: Wood/Paper/Leather (thickness within 5mm)..
  • & : Protective shield, laser safety glasses, over-heating protection, password lock, motion detection, laser indicator and overheat shut down make it super safe to use. This machine with a 12-month warranty..
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving

  • ...aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】 LATITOOL F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, and the engraving & cutting speed is faster than ordinary compressed light spot is increased by 60%, it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic....
Check Stock

NEJE 3 Max A40640 Laser Engraver, 810x460mm App Control DIY Laser Cutter and Engraver Machine Support LightBurn & LaserGRBL, 10W+ Laser Module with Auto Air Assist and Smoke Control

  • 【Top Engraving Capability】A40640 is the world's first dual-beam engraving and cutting module with a zoom design. 10W+ output power, down to 0.04mm focal length, gives the A40640 the best metal engraving capability, fast grooving capability, and thick material cutting compatibility, making it the most widely used wide range of modules. It has a top artistic performance in engraving stainless steel grayscale, stone engraving, glass engraving, hardwood relief, canvas art and other materials.
  • 【Performance Improvement】The optimized A40640 II short focus is suitable for engraving hard materials such as metal stone and cutting high-density materials such as MDF.
  • The long focus has better depth of field and smaller included angle for cutting thick wood and other materials. Due to the high power density, it has an equivalent application higher than 20W laser in large area image engraving. If you only consider 1 module to help you solve all the needs, it is the best choice.
  • 【Large Engraving Area & Meet Various Engraving Needs】460x810mm is the largest engraving area on the market. At the same time, under the NEJE Win software, the engraving area can b....
Check Stock

ATOMSTACK A5 Pro Plus Higher Accuracy Laser Engraver, 5-6W Laser Cutter, 40W Laser Engraving Cutting Machine Laser Cutter Compressed Spot CNC Carving DIY for Wood, Acrylic, Metal, 15.8''x16.2'

  • 【DOUBLE COMPRESSION TECHNOLOGY】 The upgraded 40W laser engraving machine adopts double spot compression and quadruple lens condensing, which makes the light source more concentrated than other engraving machines, and the compressed spot range is 0.08mm and 0.06mm. The powerful light source makes the engraving ability stronger, and can easily cut 15mm light wood and 12mm acrylic board..
  • 【NEW EYE PROTECTION FUNCTION】 The laser eye shield can effectively filter 97% of UV rays, effectively protecting your eyes at all times. The included protective goggles, you do not need to buy extra, reduce the cost of your goggles, and at the same time can strengthen the eye protection, so that you can watch the working process of the engraving machine at any time..
  • 【EXCLUSIVE AIR-GATHERING HOOD DESIGN】 The upgraded laser module adds an exclusive air-gathering hood design, which can effectively prevent smoke from adhering to and destroying the lens of the laser, and the guaranteed life is 3-5 times longer than other engraving machines..
  • 【EXTENSIVE COMPATIBILITY】 Atomstack upgraded 40W laser machine is compatible with a variety of mature engraving software, such as LaserGRBL, LightBurn (paid), supports Win XP / Win 7 / Win 8 / XP / Win 10, also supports MA....
Check Stock

NEJE 3 N30820 Laser Engraver, 5.5-7.5w Output Power DIY Laser Engraver and Cutter Machine Support LightBurn, 0.08mm Ultra-Fine Focus, for Acrylic Wood and Glass ,170 x 170 mm(6.7'x6.7')

  • 【High Performance Module】NEJE 3 engraving machine with NEJE classic multi-function N30820 module，5.5-7.5w output power. With square focus, the minimum focus point can reach 0.08×0.08mm. The module is good at engraving with wood, rubber stamping, glass, transparent acrylic and cutting plywood, black acrylic, cloth, etc… The module has a built-in intelligent driver, which can dynamically adjust the fan for quieter use.
  • 【Appropriate Engraver Area】170 x 170 mm engraving area, the desktop professional engraver machine is tiny, beautiful and lightweight, portable and does not take up space, and is fully functional.It is the most cost-effective machine. The whole machine test only needs 4 screws to complete the installation. Suitable for beginners/entrepreneurs/engraver hobbyists/designers/housewives.
  • 【Applicable Engraver Materials】NEJE 3 portable engraving machine supports engraving wood, MDF, leather, paper, cotton and other materials.Cover spraying can engrave stainless steel, glass, transparent acrylic and so on.The machine is compatible with mature engraving software on the market (LaserGRBL, Lightburn) and beginner-friendly software (NEJE 3).
  • 【Security Protect】Safety is always the top priority.NEJE 3 cutting and engraving machine has....
Check Stock

Hand Engraver Tool for Metal,HARDELL 13W Engraver with Stencils,120V Handheld Etching Tool for DIY, 5 Speed Engraving Tool with 7200 Strokes/Min,3 Carbide Points Included

  • 1.【SOFT RUBBER HANDLE】: HARDEll engraver handle has a soft rubber coating, the handle is ergonomically designed to perfectly fit the curvature of the hand grip, which can effectively reduce wrist fatigue and soreness after long hours of engraving work, giving you a comfortable and precise operating experience..
  • 2.【5-SPEED ADJUSTABLE ENGRAVING TOOL】: 5-Speed engraving pen can provide a variety of engraving depths and speeds according to your engraving needs. Handheld engraving machine is equipped with 3 replaceable tungsten carbide writing heads, allowing you to obtain detailed and satisfactory engraving results on a wide range of engraving materials. such as tile, metal (not applicable to hardened steel), stone, wood, leather, glass, PVC pipe, DIY crafts..
  • 3.【SMALL BODY, BIG POWER】: With a lightweight 12oz design, the 7200Strokes/Min 13W handheld engraver can fully meet the daily engraving needs of crafters. The comfortable pen design gives you more freedom in operation and is easy to carry, which can perfectly fit your private custom engraving needs..
  • 4.【VIBRATION TYPE ENGRAVING PEN】: Mental engraver using pure copper coil movement to provide surging power and longer life. Vibration engraving work principle, making the carving lines mor....
Check Stock