Categories

Best Tft Colorful 2 0 Screen

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D Printer Parts for 1.75mm Filament SKR V1.3 Mini E3 GEN V1.4

  • 1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
  • 2) It can detect that the consumables such as consumables are broken and the consumables are not used..
  • 3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
  • 4) Support the motherboard with the break detection interface..
  • 5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..
Check Stock

Freeda Biotin 10000 mcg - Kosher Biotin 10000mcg Hair Skin and Nails Vitamins for Hair Growth - Biotin Pills Hair Growth Vitamins B7 - Superior Biotin Supplement Hair Vitamins for Women & Men (100 Ct)

  • TRIPLE-LAYER PROTECTION - The best protection for your 4. 7 inch iPhone 6S. Period! Constructed out of a "no stretch" soft TPU case + extra hard polycarbonate back plate + crystal clear HD TFT screen protector. Your iPhone will be protected from all angles..
  • 4 SILICONE SHOCK ABSORBERS - Say goodbye to the good old air cushion! Our unique silicone shock absorbing technology integrated into each corner of the case s maximum shock protection..
  • FRONT AND REAR PROTECTION - Don't expect any less! The beveled edge on the front of the iPhone 6 case provides a 0. 9 mm lip when laying on a table. The 4 raised edges with a maximum height of 0. 8 mm protect the back of the case.
  • EASY ACCESS PORTS - Ensures ultimate connectivity. Extra large openings allow easy access to all ports, buttons, and camera. Compatible with most battery chargers and earphone jacks..
  • INCLUDED AT NO EXTRA COST! THE ORIGINAL HD TFT SCREEN GUARD - This high quality screen protector ($10 value) provides full protection for your iPhone screen and is included at no extra cost! Fabricated from premium quality material made in Japan, the high-transparency HD TFT screen protector provides ultimate scratch and impact resistance..
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

Hantek1832C Handeld 40kHz LCR Meter with Carry Case, 0.6Vrms

  • 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz test frequency, 0.6 Vrms test level, 0.30% accuracy.
  • Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
  • 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
  • Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
  • reset function: open/short circuit calibration.
  • 2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.
Check Stock

Hantek1833C Handeld 100kHz LCR Meter with Carry Case, 0.3/0.6 Vrms

  • 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz/50kHz/75kHz/100kHz test frequency, 0.3/0.6 Vrms test level, 0.30% accuracy.
  • Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
  • 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
  • Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
  • reset function: open/short circuit calibration.
  • 2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

  • ⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
  • ⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
  • ⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
  • ⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
  • ⭐【Satisfying After-Sales Support】If you have ....
Check Stock

EBIKELING 24V/36V/48V/52V Waterproof TFT 750C - LCD Display Speedometer Control Panel - Odometer for Electric Bicycle ebike

  • The waterproof TFT 750C LCD display offers much more than a digital screen and fancy look, it allows users to edit controller parameters, control all functions on your ebike from speed to wheel size..
  • This intelligent designed ebikes accessory with Simple operation for any men or women to track their outdoor riding needs such as cycling distance, remaining battery level, current speed (mph-kmh), average speed, maximum speed, total and single trip distances..
  • Numbers are big enough to ensure readability while riding in all conditions. With the colorful backlight LCD, provide your high visible statistics during day and night..
  • EBIKELING 24V/36V/48V/52V Waterproof TFT 750C - LCD Display keeps moving in worst weather thanks to its full-sealed design. Waterproof body allows the bike computer to stay with you in any environment or weather. The body is fully sealed, to make sure no water can get in by any means..
  • High-contrast 3.2inch IPS colorful matrix screen. Ergonomic external button design, easy to operate. The large buttons allows you to select the desired mode. This makes the EBIKELING LCD Display a very simple and attractive..
Check Stock

BW 3.5 Inch TFT LCD Monitor for Car / Automobile

  • Brand New and High quality. Portable 3.5.
  • Wide view angle, low illumination. D/N models with photo-sensor. Distance reference marking display. Easy installation..
  • Screen Size: 3.5 inch. Ratio: 4:3 TFT screen. Power Supply: DC 12V..
  • Visible Area: 72mm x 53mm. Power Consumption: 2W. Operating Temperature: 0°C ~ +80°C. Storage Temperature: -10°C ~ +80°C..
  • Video: 2-channel video input. Dimensions: 93 x 80 x 20mm (LxWxH)..
Check Stock

AMOLED 2023 New HK8 Pro Max Ultra Smart Watch Men Series 8 49mm 2.12 Inch High Refresh Rtae AMOLED Screen NFC IWO Smartwatch Women Black

  • APP RDFit Compatible System (Compatible System) Android4.4 (inclusive) and above, IOS9.0 (inclusive) and above FLASH memory (FLASH memory) RAM: 192KB, ROM: 256KB Flash: 128M.
  • Type (Type) TFT Screen size (screen size) 2.16 inches Pixel (Resolution) 420*486 IPS Touch type (Type) full screen touch BT BT5.0.
  • NFC support Gravity sensor (G-Sensor) support.
  • Battery type (Type) lithium polymer Capacity 350mAh Charging Method Wireless Charging.
  • Waterproof level (Waterproof Level) IP68 Charging time (Charging time) about 3H Life time (Life time) about 5-7 days in use, 30 days in standby.
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock