WZRELB 3000watt Pure Sine Wave Inverter 24V DC to 120V AC 60HZ with LED Display Car Inverter Generator (RBP300024B1)

  • WZRELB solid Pure Sine Wave 3000w 24V Inverter, 6000W Surge,120VAC 60HZ with 4 battery cables suitable of a gauge ,and accessories such as connectors,fuses for replacements use..
  • Function:The power inverter converts the DC power generated into the AC power which is used by most of our electronics..
  • The 24v Power inverter has good protections including high voltage input cut off protection, low voltage alarm protection, overload protection, over current protection, surge power protection, reverse connection protection and short circuit protection by fuse..
  • LED Display for both DC volt and AC volt, which makes it clear for the user.High efficiency above 90%,Low Failure Rate.
  • This pure sine wave inverter has earth grounding connection for PCB board and the whole, which makes it safer for the users..
  • Included components: power inverter, cables, fuses, user manual.
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

B00IIHIA3Q Samsung DA92-00111B Refrigerator Inverter Power Control Board Genuine Original Equipment Manufacturer OEM Part

  • This part is compatible with models including.
  • Inverter power control board DA92-00111B manages the functions of the refrigerator, such as cooling.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Samsung.
  • This inverter power control board (part number DA92-00111B) is for refrigerators.
  • Safely store any food that could deteriorate while the power is off.
Check Stock

Ferwooh Nextion 3.5'' Display NX4832T035 Resistive Touch Screen HMI TFT Smart Module LCD for Arduino Raspberry Pi ESP8266

  • The 3.2 tft lcd expansion board is compatible with arduino mega 2560.
  • With tft lcd shield, you can use 3.2 touch screen with mega more conveniently.
  • This 3.2" lcd shield is NOT compatible with all 3.2" tft lcd. Please chheck it carefully..
  • You can buy 3.2" tft lcd for the shield by "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

NEXTION 7 inch Enhanced NX8048K070-011C HMI Touch Screen LCD Display Pannel 800x480 with Enclosure Case for Arduino Raspberry Pi (Capacitive)

  • Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or device, it is the best solution to replace traditional LCD and LED. Replace the Nixie tube. It is mainly used in the Internet of Things (IoT) or consumer electronics..
  • Nextion consists of a hardware part (a series of TFT cards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port for communication. Save users the hassle of wiring. It is easy to adapt the Nextion family HMI to existing projects. Users just need to provide it with a UART..
  • You can power Nextion 3.5 from the 5V pin on the microcontroller, but this is not recommended. Working with insufficient power can damage the screen, so please use the power board that comes with nextion. See the image for use..
  • NX4832T035 is a powerful 3.5 inch HMI. Features include: 3.5 inch 480 x 320 TFT resistive touchscreen display, 16MB Flash, 2KB RAM, 65,000 colors. Viewing area: 73.44mm (L) × 48.96mm (W).
  • Uploading a TFT file via an SD card is faster than a 4-pin serial connection, but the credit card is in FAT32 format and does not exceed 32GB..
Check Stock

Enterpark New 519306005 241577505 Inverter Control Board No Wire OEM Part Compatible for Electrolux Frigidaire Whirlpool 1512577 7241577505 AH2361242 EA2361242 PS2361242 - Year Warranty

  • Inverter control board 241577505(519306005) manages the functions of the refrigerator, such as cooling..
  • Compatible Part Numbers: EA2361242, PS2361242, 241577505, AP4393275,1512577, 7241577505, AH2361242.
  • Unplug the refrigerator before replacing the inverter control board. Wear work gloves to protect your hands..
  • Please check the compatibility with your previous part and appliance's model before ordering this replacement..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

  • ⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
  • ⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
  • ⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
  • ⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
  • ⭐【Satisfying After-Sales Support】If you have ....
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

GE WR55X10942 Refrigerator Main Control Board

  • Genuine GE OEM authorized factory part number WR55X10942.
  • This board will not work on GE refrigerator models that have a compressor inverter board.
Check Stock

KOOBOOK 1Pcs 3D Printer Control Board Controller PCB Board MKS Gen L V1.0 Integrate Ramps Motherboard 12/24V

  • 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive..
  • Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • 24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen..
  • The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)

  • This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • 2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • 2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock