Categories

Best Tft Lcd Touch Screen

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer

  • ❤【Touch Screen for Ender 3 】Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen..
  • ❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk..
  • ❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port..
  • ❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated..
  • ❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and....
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

  • ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
  • ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
  • You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
  • ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check Stock

Screen Replacement for Samsung Galaxy S3 i9300 i9301 i535 TFT (Not Original) with Frame LCD Display Touch Digiziter Panel Repair Parts Kit,with Screen Protector + Tools (Black)

  • ✅Compatible Models ------ 【TFT】For Samsung Galaxy S3 i9300 i9301 i535 4.8inch LCD touch assembly. Please compare the model number. The picture quality of TFT screen may be lower than the original screen,please consider carefully which one is suitable before buying.Also, the failure of the phone due to reasons other than the LCD & touch will not be resolved by replacing this accessory. Please check the specific cause of the malfunction before purchasing..
  • ✅Strict Quality Control ------ All A-MIND products undergo strict quality inspection before shipment, make sure no scratches and dead areas in LCD. Pls connect the flex cable to test if it is in normal operation before installation. We reject any scratches and offer only A + quality products..
  • ✅Applications ------ Repair broken screens, heal liquid crystal ruptures, dead point pixels, touch inactivity, touch response problems, display problems, false color problems, non-functional screens, etc. Note: If your phone can no longer be used for any reason other than the LCD panel, replacing the LCD will not solve the problem, so please check the cause of the problem before purchasing..
  • ✅Installation suggestion ------ Not included Installation tutorials, If you are experienced in maintenance and h....
Check Stock

Aluratek 8 Inch LCD Digital Photo Frame with Auto Slideshow Using USB SD/SDHC (ADPF08SF) - Black

  • The unit does not have a touch screen. There is no built in memory. There is no built in battery. There is no remote control included.
  • View hi-quality digital photos on the 8 Inch TFT true color LCD at 800 x 600 resolution. High quality wood frame with easy to use controls.
  • Photo slideshow mode will begin automatically once the frame is powered on.
  • Supports various picture formats as most file formats are automatically recognized.
  • Supports SD / SDHC memory cards (up to 32 GB).
  • Connect a USB flash drive or SD card to easily access and share your favorite photos.Frame adjustable for vertical orientation.Dimensions: 8.5 x 1 x 7 in. (21.6 x 2.5 x 17.8 cm).
  • Weight: 1 lb. (16 oz).Package Contents: 8 Inch Digital Photo Frame,Frame Stand, Power Adapter, Quick Start Guide, Registration Card / Warranty Card - 1 year.
  • View hi-quality digital photos on the 8" TFT true color LCD at 800 x 600 resolution.
  • Supports memory card formats such as: SD / SDHC.
  • Frame stand adjustable for vertical orientation.
Check Stock

BIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi

  • 1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
  • 2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
  • with a capacitive touch panel. Supports 5-point touch..
  • 3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
  • 4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
  • 5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..
Check Stock

Screen Replacement for Samsung Galaxy J7 2016 J710 J710F J710M/H TFT LCD Touch Screen Digitizer Glass Assembly Not Original AMOLED Gold

  • Note pls:This is TFT LCD Display compatible for original AMOLED screen, this LCD is not original, but can compatible For Samsung Galaxy J7 2016....
  • [Strictly quality control]All the screens are 100% tested with original machine before shipping, make sure no scratch and dead area in LCD. Pls....
  • [LCD Screen Replacement For Samsung Galaxy J7 2016 ] This screen replacement For Samsung Galaxy J7 2016 LCD Screen is Not Original AMOLED, it's TFT....
  • [Package Contains]1 X LCD Screen Assembly ,1 X Glue Tape,1 X Repair Tools,1x opening card, 1x tempered glass film, more easy for installing with tools....
  • [After-sale Service]we guarantee 6 months for our products,if there are any non-human factor quality problem,please contact us in 12 months! we....
Check Stock

Geekworm for Raspberry Pi 4 Model B, 3.5 inch Touch Screen with ABS Case and Pi 4 Heatsinks Kit, Max 50FPS 480x320 Pixel Monitor TFT Touch LCD (Support Raspbian, Ubuntu, Kali, Retropie System)

  • For the document and download information, refer to Geekworm WiKi search (3.5_LCD_B)..
  • Note: 1. The Raspberry Pi 4B mother board and cooling fan is not included in all the packing list. 2. The black ABS case only suitable for this 3.5 inch screen with Raspberry Pi 4 Model B, do not support other Raspberry Pi versions. Not support install cooling fan..
  • Physical resolution 320 x 480, with resistive touch control.
  • it supports up to 125MHz SPI signal input, showing stable and no flicker.
  • Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and image, please refer to WiKi(user manual)..
  • LCD Interface: SPI (up to 125MHz SPI input, Max FPS: 50Mhz).
Check Stock

10.1 Inch Ultra-Thin Security CCTV Computer Monitor 1024x600 Resolution Touch Buttons Video and Audio LED Color Display Screen AV/VGA/HDMI Input with Remote Control

  • 【HD Resolution & Dynamic Contrast】The stunning 10.1" TFT LCD monitor screen with HD 1024*600 resolution,300:1 dynamic contrast ratio delivers excellent details. Bright saturation image and high color reduction give you a pleasant visual enjoyment. Perfect choose to be used as CCTV monitor, PC monitor or gaming monitor. What's more, you can also use it as a mini size TV by connecting with a TV-stick, photo scanner or video display..
  • 【Multiple Interfaces & Multiple Functions】This small portable monitor provides a rich set of video input options - including 1x HDMI port for Raspberry Pi, DSLR, DVR or other devices with HDMI port use, by plugging with a TV-stick, you can use it as a small TV. 1x VGA port for computer or laptop use. 1x AV port for DVD,VCD,TV-Box or security camera which has AV protect..
  • 【Touch Button & Remote Control】The design of touch key make the operation more convenient,You can simply use the remote control to real-time control this monitor. Also NO button damage issue for after long time use. Multi language OSD menu can complete various settings, such as rotating the view of screen..
  • 【Energy Efficient】Environment friendly, the 10.1 inch LCD monitor is designed to meet Energy Star standards. Automatic sleep function redu....
Check Stock

ciciglow Video Door Phone Doorbell, 7in TFT Wired Video Intercom System Touch Button Night Vision Video Intercom Monitor Home Security System with IR Cut HD 1000TVL Camera(US Plug)

  • TFT LCD Screen: This intercom doorbell adopts 7 inch color TFT LCD screen with high definition display and high sensitivity touch control..
  • 25 Ringtones: There is 25 doorbell ringtones optional, and the volume, brightness and contrast are adjustable..
  • Infrared LED Light: Equipped with infrared LED light, more convenient for evening use, see the visitors clearly in the night..
  • Water Proof: Designed with rain cover, no need to worry getting damaged in the rain, aluminum alloy is anti oxidation, ensuring years of use..
  • Safe and Beautiful: The intercom doorbell has no radiation and low power consumption, indoor and outdoor unit are all piano paint panels, fashionable and luxurious..
Check Stock

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock