Categories

Best Tft Vanity

DIYmall Mini PiTFT 1.3″ LCD Display 240×240 TFT Add-on for Raspberry Pi 3.3V SPI ST7789 3.3V SPI ST7789 Full Color(Pack of 2PCS)

  • TFT size： 1.3″ diagonal, Voltage：3.3V, Interface：SPI, Driver: ST7789, Color：Full color.
  • The Mini Pi TFT 1.3 ” – 240×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi , to give you a little display..
  • The Mini Pi TFT comes with a full color 240×240 pixel IPS display with great visibility at all angles..
  • The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

Ferwooh Nextion 3.5'' Display NX4832T035 Resistive Touch Screen HMI TFT Smart Module LCD for Arduino Raspberry Pi ESP8266

  • The 3.2 tft lcd expansion board is compatible with arduino mega 2560.
  • With tft lcd shield, you can use 3.2 touch screen with mega more conveniently.
  • This 3.2" lcd shield is NOT compatible with all 3.2" tft lcd. Please chheck it carefully..
  • You can buy 3.2" tft lcd for the shield by "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

  • ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
  • ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
  • You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
  • ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check Stock

sb components 3.2\ TFT LCD Transparent Case for Raspberry Pi 2 and Raspberry Pi 3 (Black)

  • This is a no-nonsense protective case for 3.2" TFT LCD for Raspberry Pi 3 Model B.
  • The case is a three-piece injection-moulded ABS enclosure that snaps together around 3.2" TFT LCD and Raspberry Pi 2.
  • It provides the best available protection/accessibility for 3.2" TFT LCD and Raspberry Pi 2 Model B.
  • Wall Mountable. Access to all Pi 2 consumer ports..
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock

NEXTION 7 inch Enhanced NX8048K070-011C HMI Touch Screen LCD Display Pannel 800x480 with Enclosure Case for Arduino Raspberry Pi (Capacitive)

  • Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or device, it is the best solution to replace traditional LCD and LED. Replace the Nixie tube. It is mainly used in the Internet of Things (IoT) or consumer electronics..
  • Nextion consists of a hardware part (a series of TFT cards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port for communication. Save users the hassle of wiring. It is easy to adapt the Nextion family HMI to existing projects. Users just need to provide it with a UART..
  • You can power Nextion 3.5 from the 5V pin on the microcontroller, but this is not recommended. Working with insufficient power can damage the screen, so please use the power board that comes with nextion. See the image for use..
  • NX4832T035 is a powerful 3.5 inch HMI. Features include: 3.5 inch 480 x 320 TFT resistive touchscreen display, 16MB Flash, 2KB RAM, 65,000 colors. Viewing area: 73.44mm (L) × 48.96mm (W).
  • Uploading a TFT file via an SD card is faster than a 4-pin serial connection, but the credit card is in FAT32 format and does not exceed 32GB..
Check Stock

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer

  • ...pearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen..
  • ❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk..
  • ❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port..
  • ❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated..
  • ❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and produced by BIGTREETECH team,any qu....
Check Stock

Ove Decors Kansas 36\ Bathroom Vanity Combo w/Top and Backslplash, 36 inches, Dove Grey

  • [READY TO INSTALL]: OVE vanity 36-inch comes fully-assembled for easy installation and transportation. Hardware for installation is included. Countertop with integrated basin is pre-assembled to vanity cabinet. Pre-drilled holes for easy installation of 4-in faucet (faucet sold separately)..
  • [VANITY STYLE & DIMENSIONS]: Traditional 36-inch freestanding bathroom vanity set available in White, Dove Grey, Midnight  Blue or White Oak beadboard finish. Vanity dimensions: 36-in W x 19-in D, ideal for small to mid-size bathrooms..
  • [MATERIAL & QUALITY]: This OVE Decors vanity cabinet is solid constructed with engineered wood. Includes the basin, countertop and backsplash. Performs a high-end modern brushed nickel hardware..
  • [WHATS’S INCLUDED]: 36-inch vanity combo includes: 1 Countertop, 1 Backsplash, Hardware, 1 Vanity Cabinet, 1 Basin. Kansas vanity available in widths of 18-in., 24-in, 30-in and 36-in..
  • [TOP PERFORMANCE]: The 36-inch single sink vanity features soft-close cabinet doors hinges and smooth slides for the drawers for a quiet opening & closing. The Kansas vanity adds one functional bottom drawer for more storage. Features adjustable interior cabinet shelf for versatile storage options.
Check Stock

SHNITPWR 14V Power Cord for Samsung Monitor 14V 3A 2.5A 2.14A 1.78A 42W Power Supply AC DC Adapter for Samsung SyncMaster 15 17 18 19 20 22 23 24 27 Screen TFT LED LCD TV Monitor

  • Output: DC 14V, 3A 42W Max, compatible with all currents less than 3A 42W, such as 2.5A 35W, 2.14A 30W, 1.78A 25W, etc.....
  • Compatible with Samsung SyncMaster 150MP 1501MP 152B 152T 570S TFT 570V TFT 170T 172B 172S 172T 171P 760V TFT 770 TFT 180T 191T 192T B300 Series....
  • Compatible with S24A300B S24E390HL S24E310HL S24E370DL CF591 C27F C27F591 C27F591F C27F591FD C27F591FDN LC27F591FDN XZA S27E510C S27A350H S27B350H....
  • CE safety certification. Level VI energy efficiency. Certified by FCC CE RoHS. We focus on premium quality and safe power adapters. Automatic....
  • You will get: 1x 14V power supply adapter.
  • 1x AC Power Cord . The power cord is extra long 8.5ft, you don’t have to worry the wall socket is hard to....
Check Stock

Gitrah White Vanity Chair for Makeup Room Vanity Stool for Makeup Room Round Ottoman Tufted PU Leather Makeup Chair Vanity Stools for Bathroom Height Adjustable 360 Swivel

  • Multi-scene available: This Gitrah vanity chair vanity stool for makeup room is a perfect choose for your home. round ottoman is suitable for bathroom, bedroom, living room, office, college dorm, lounge or studio apartment, etc..
  • Highlights: this vanity stool for makeup room has High Quality PU Leather, tufted ottoman has thick Seat Cushion, vanity chair for makeup room with Neat and Strong Thread and Sturdy Chrome Finish Metal Base. Comfortable & Stable Accent Chair vanity stool bathroom for makeup chair for vanity.
  • Size: the round leather ottoman has Φ16 inch Wide Seat and 5.3 inch thick tufted ottoman cushion.
  • Height adjustable from 18.5 inch to 25 inch, Φ15.5 inch Metal Base makes makeup vanity chair vanity stool for makeup room more stable. Easy to install this vanity stool bathroom in only 5 minutes..
  • 360 Degrees Swivel vanity chair for makeup room, The gas-lift bar used for adjustment has passed the BIFMA safety certification issued by the SGS organization. the bottom is equipped with a rubber ring to prevent you from slipping when rotating the tufted ottoman vanity stool for makeup room..
Check Stock

Laptop 14V 3A Monitor Power Supply Compatible Samsung SyncMaster LCD/TFT 770 S20D300H 193P S22A300B S24B150BL S22C300H S23C350H S27D390H P2770 P2770FH S27D590P U28E590D A3514-DPN AD-4214N Cord.

  • Output:DC 14V 3A 42W Input: AC 100-240V 1.6A 50-60Hz Connector Tip:6.0*4.4mm(With pin inside) Prongs:2-Prong Package:1x Ac adapter and 1x Ac power....
  • Compatible P/N.: Samsung SyncMaster 150MP 1501MP 152B 152T 570S TFT 570V TFT Series 15" LCD monitors SyncMaster 170T 172B 172S 172T 171P 760V TFT 770....
  • Fit for Models: Samsung S27a350h S20D340H S20D340HY S22D300BY S22D300HY S22D300NY S22D340HY S24D300HL S24D340H S24D340HL TFT LCD Monitor Power Supply....
  • SKY BOY specialized in Laptop Accessories including Laptop Batteries, Chargers and other Electronics. All of the products are manufactured with the....
  • Fit for Models: Works with Samsung S27A350H S20D340H S20D340HY S22D300BY S22D300HY S22D300NY S22D340HY S24D300HL S24D340H S24D340HL TFT LCD Monitor....
Check Stock