Electric Fence Insulator 20 PCS Black Ring Insulator Wood Post Insulator Screw-in Insulators Fence Ring for Agricultural Fencing Wood Post Insulators & Animal Husbandry Electronic
- 【Packing】: 30 PCS black electric fence insulator, made of metal and plastic material,strong and study construction..
- 【Size】: Screw-in Insulators size: Total length = 3.7"/95 mm, Self-tapping Screws Length = 1.8"/45 mm. the top mid ring approx 0.38 inch / 9.5 mm..
- 【High Quality Material】The Black Ring Insulator Made of metal and plastic material, high quality. High strength, good insulation, non-deformation, sun protection and rain. friendly for completely to people, pets and wildlife..
- 【Easy to install】: Self-tapping design can easily screw into timber fence by hand, no need tools any.easy to install for quick screw-in and labor-saving.if you not understand, please see to picture with up..
- 【Widely Use】Electric fence ring insulators for wire, multi-line, rope and electric fence tape, can be used as start, end, corner or line insulator.This electric fence insulators angled slot can hold electrified wire without energy loss. Electric fence ring insulators suitable for 8 gauge through 30 gauge high-tensile steel wires..
Check StockSurebonder 5540HOL Light Tacker
- The product is highly durable and easy to use.
Check StockJustin Men's Conductor Electrical Hazard Pull-On Work Boot Soft Toe Copper 11 EE US
- 3D models that you control, each structure clearly labeled with useful all apparatus information..
- Audio guide available about electric conductors and insulators..
- Rotational models (views from different angles).
- Tap and Pinch Zoom - zoom into and identify about the electric conductors and insulators..
Check Stock100PCS Electric Fence Insulators - Screw-in Insulator Fence Ring Post Wood Post Insulator,Livestock Fence Accessories,Safe Agricultural Fencing Garden Supplies Accessories
- [Durable long life]: The cover of fence ring insulators are made of metal and Thickened plastic which have great insulation property, sturdy, resistant to sun exposure and rain, very durable,Won't break easily.
- [Screw-in design]: The slot design can fix wire firmly and reduce the abrasion to lengthen the service life of wire and the Screw-in design enables the wire to be inserted with one easy twist.The angled slot can hold electrified wire without energy loss, suitable for low impedance and standard load fence controllers..
- [Versatile insulaors]:Electric fence insulators offer a higher insulation resistance and a higher insulation strength for the fence. Insulation for electric fences for animals, wild boar, dog-cows, horses, pigs, chickens, goats, foxes, badgers.
- [widely used insulators] :Electric fence insulator rings are suitable for high-tensile steel wires, aluminum wires, polybraid and polywires, Suitable for all types of wires, threads and bands made of metal.
- [Function]:To prevent electrical shorts between the electrified wire and the fence posts,keep the space between wires and post.To create solid electrical connections between wires for higher conductivity..
Check StockDelta, 36-T30T3, 30 in. DELTA® T3 Fence System
- 1. Premium Material: The Wood Post Insulatos are made of impact resistant plastic,durable and weathering resistant..
- 2. Non-conductivity: The insulators holds the wire, poly wire, poly rope up to 6mm. Distance from the fence post keeps the wood posts free of current and prevent electrical shorts between the two..
- 3. Effective function: Fit securelyon any wood post and hold the wire sturdly...
- 4. Easy installation: The special screw-in design makes the installation quite simple. Just screw in manually or by screw driver, then all ready..
- 5. Package Includes: 25 Pcs High quality insulators..
Check StockGOUNENGNAIL-.157\ x 2.36\ x 7.87\ Copper Ground Bar Kit, with 5/16''x10 Terminal Positions,Copper Grounding Busbar Bar Kit
- Copper ground bar . Made of high conductivity copper to inhibit corrosion.Insulator material: Made from UL recognized resin material and meets the Requirements of UL 94 VO for Self-Extinguishing Materials..
- Wall mounted copper ground bar kit enables multiple ground points to be connected quickly and easily..
- Comes pre-assembled with brackets and insulators attached for quick installation.
- This is a copper ground bar set, including one copper plate, two polyester standoff Insulators, two stainless steel brackets, 5/16'',10 stainless steel terminal positions. ..
- Widely used in high low power distribution cabinet.For power distribution, transmission, fixing copperor copper busbar, etc, play the role of minsulation and connection..
Check StockEVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only
- Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
- Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
- The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
- EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
- Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters
- 【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
- 【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
- 【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
- 【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
- 【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..
Check StockWall Mounted Copper Ground Bar 16 Terminal Positions .25\ x 2\ x 10\ Ground Bus Bar Kit,SM40 Insulators Rated Uimp
- .25" (1/4") x 2" x 10" Copper Ground Bar with 1/4''* 16 Terminal Positions..
- This is a high conductive copper ground bar set, including one copper plate, two SM40 polyester standoff Insulators, two stainless steel brackets, 16 sets stainless steel washer& bolts ..
- SM40 polyesters made from UL material - QMFZ2.E252110,Rated Uimp up to 6kV ..
- Wall mounted copper ground bar kit enables multiple ground points to be connected quickly and easily. Comes pre-assembled with brackets and insulators attached for quick installation. Widely used in high low power distribution cabinet,equipment grounding connections,For power distribution, transmission, fixing copper or copper busbar, etc..
- 100% after-sales guarantee. If you have any problems within 30 days of receiving the goods, you can enjoy the unconditional return refund service..
Check StockANL Fuse Holder+2 pcs of 200A Fuses+4pcs of 1/0 AWG Cable Ring Terminal Lugs 5/16'+4 pcs Terminal insulators All-in- One Pack (200A)
- Selling by package: ANL Fuse holder*1+ ANL fuse*2+0 Awg wire ring terminal lugs*4+ terminal Lug insulators*4 ..
- 200A ANL fuse one for installation and one for spare part..
- 4 pcs 0 AWG cable terminals lugs and 4 insulators convenient for your installation..
- Heat resistant plastic base with fixing holes on ends..
- Metal materials: Zinc alloy Nickel plated with screw nuts and washers..
Check StockSINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS
- 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
- 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
- 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
- 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
- SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check StockWATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided
- 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
- 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
- 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
- 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check StockTIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings
- Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
- High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
- High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
- Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
- Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check Stock