Best Thermal Break Aluminum Profiles

Lanpu 30 PCS Raspberry Pi Heatsink Kit Copper Raspberry Pi Aluminum Heatsink for cooling cooler Raspberry Pi 3, Pi 2, Pi Model B+

Package includes 20 black anodized aluminum & 10 copper heatsink.
Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards.
Can be applied with other devices for cooling VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc.
Adhesive thermal tape backing, Raspberry pi not included.
These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases..

Check Stock

1 x 1 1010 Series Aluminum Extrusion Profiles Frame Hinge Install Kit Connector Set 4pcs Zinc Alloy Hinge with T-Nuts Hex Screw Bolt for 1 Inch x 1 Inch Extrusion Profiles Rail

1010 10 series aluminum profile T-slot connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC....
Package content: 4pcs 1 inch x 1 inches Aluminum Extrusion Profiles Frame Hinge, 16pcs galvanized T-slot nuts, 16pcs stainless steel hex socket cap....
Zinc alloy hinge used to connect pieces of 1" aluminum extrusion at a 90 degree angle suitable for most of 10 series aluminum profile extrusion.
Stainless steel hex socket button head bolts screws nuts surface chrome finish anti-corrosion, rustless, non-pollution.
Used to connect the connection between profiles and profiles or boards.

Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.
Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".

Check Stock

Dell Latitude 3301 13.3

Intelligent thermals: the Latitude 3301 is smart enough to know when it’s in your hands, lap or on a desk. This allows it to Intelligently adapt its thermal profiles to stay cool. It remains cooler on your lap and full power is unleashed when stationary on a desk for maximum productivity..
Minimize distractions: a 3-sided narrow Border enhances your screen, so you can collaborate in online meetings or work on your latest projects in style. Upgrade to the full HD display option to view your work with complete clarity..
Lightweight: travelling is easier than ever thanks to its compact design that fits perfectly into your carry-on, backpack or bag..
Redesigned hinge: your laptop lifts slightly off the table when open past a 135-degree angle, allowing for improved air circulation and a more comfortable typing experience..
Impressive inside and out: Available in aluminum or black, The sleek exterior outshines in any setting, while the diamond cut touch pad feels as good as it looks..

Check Stock

25pcs L Bracket Corner Brace Fastener 2 Hole Aluminum Right Angle Support Shelf Bracket Joint for Extrusion Profile for Door, Door Leaf

【Function】- 4040 Corner Bracket is used as the connecting piece of aluminum alloy door, door leaf and outer frame. It can make the two pieces of furniture more smooth and confine through a 90 degree right angle.4040 corner bracket.
【Aluminum Fasteners】- 4040 inside corner bracket are made of solid cast aluminum, which is strong and durable, anti-rust and . The pure aluminum material ensures that there is no magnetism and protects the matrix from corrosion.
it has better heat shrinkage, hardness and stability ..
【Application】- They are used to connect two profiles at right angles. They can be used to connect profiles that require moving positions. They are easy to use.
they can be easily fixed with bolts and nuts. Note: Bolts and nuts are not included and need to be equipped separately..
【25pcs】- A set of 4040 right-angle brackets for 4040 aluminum profiles, a total of 25 brackets, can be used for many projects, widely used to reinforce the right-angle corners of doors, windows, furniture, etc..
【After-sales Guarantee】- We are committed to providing the best products and best services. If you have any questions about our products, please contact us by email. Our professional customer service team will reply and solve your problems in t....

Check Stock

senya Lunch Bag Koala And Flowers Insulated Lunch Box Cooler Bag Tote Bag for Women Kids/Picnic/School/Work

Larger Capacity: The lunch bag Dimension is 9.8 x 6.7 x 8.7 inches. The main compartment is spacious for your lunch, the front insert pocket is ideal....
Material: The Lunch Bag is made with 300 D oxford cloth and aluminum foil. High quality metal zippers will not easy break, thick handle reduce weight....
Thermal Resistance: Superior aluminum film for great thermal resistance, our lunch bag keeps food warm or cold up to 5 hours..
Lightweight &Portable: A strong thick handle, highly stitched not tear easily, ensure your comfortable carry..
Unique Print: Vibrant colors and cute pattern provide style to your lunch bag, suitable for all age groups..

Check Stock

Unxuey Aluminium Heatsinks Radiator Fin 50x25x10mm Cooler Heat Sink for Cooling LED IC Chips CPU GPU VGA Pack of 10

Made of high quality Aluminum, good thermal conductivity.
The fins increase the area of the board and thus provide for greater heat transfer..
★Size: L*W*H -50mmx25mmx10mm (2 x 1 x 0.4inch), please make sure that the size of the heat sink fits that of your component..
These heat sinks have profiles which are short enough to fit within standard cases such as those for Raspberry Pi..
The large surface area of this heatsink in compare to those conventional small heatsink kits, creates more efficiency for heat dissipation for cooling....

Check Stock

T-Slot Nut, 20Pcs Zinc Plated Carbon Steel Sliding T-Slot Nut for Aluminum Profile Accessories(M6)

✔Made from high quality carbon steel, these nuts have high hardness and a long service life. T Track.
✔Surface is plated with zinc for good rust resistance and better performance. Truck Bed Bike Rack.
✔There are total 20pcs nut that you can use for many projects. Aluminum Extrusion.
✔They are simple to use and convenient to connect aluminum profiles to other parts. T-slot Nuts.
✔These hammer head nut are mainly used for type-40 aluminum extrusion profiles..

Check Stock

Dell Latitude 3301 13.3\ Notebook - Intel Core I5-8265U - 8GB RAM - 256GB SSD

Lightweight: travelling is easier than ever thanks to its compact design that fits perfectly into your carry-on, backpack or bag..
Minimize distractions: a 3-sided narrow Border enhances your screen, so you can collaborate in online meetings or work on your latest projects in style. Upgrade to the full HD display option to view your work with complete clarity..
Impressive inside and out: Available in aluminum or black, The sleek exterior outshines in any setting, while the diamond cut touch pad feels as good as it looks..
Redesigned hinge: your laptop lifts slightly off the table when open past a 135-degree angle, allowing for improved air circulation and a more comfortable typing experience..
Intelligent thermals: the Latitude 3301 is smart enough to know when it's in your hands, lap or on a desk. This allows it to Intelligently adapt its thermal profiles to stay cool. It remains cooler on your lap and full power is unleashed when stationary on a desk for maximum productivity..

Check Stock

ASUS ROG Crosshair VIII Hero X570 ATX Motherboard with PCIe 4.0, Integrated 2.5 Gbps LAN, USB 3.2, SATA, M.2, Node and Aura Sync RGB Lighting

Comprehensive thermal design: active PCH heatsink, M. 2 aluminum heatsink and ROG cooling zone..
5-Way Optimization: automated system-wide tuning, providing overclocking and cooling profiles that are tailor made for your rig..
Amd AM4 socket: ready for 2nd, and 3rd Gen AMD Ryzen processors and up to two M. 2 drives, USB 3. 2 Gen2, and AMD storemi TO maximize connectivity and speed..
Diy friendly design: pre-mounted I/O shield, ASUS safe Slot, BIOS Flashback and premium components for maximum endurance..
High-performance networking: integrated 2. 5 Gaps Ethernet and Gigabit Ethernet, both with ASUS LANGuard protection, and support for GameFirst V software..

Check Stock

PZRT 3030 Series 50-Pack M5 T-Nuts,Carbon Steel Nickel-Plated Half Round Roll in Sliding T Slot Nut 8mm Slot Aluminum Profile Accessories

3030 Series Aluminum Profile T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
Made from high quality carbon steel, these nuts have high hardness and a long service life surface is Nickel-plated for good rust resistance and better performance..
There are total 50pcs nut that you can use for many projects..
Half Round Roll In Sliding T Slot Nut 8mm Slot They are simple to use and convenient to connect aluminum profiles to other parts..
These hammer head nut are mainly used for 8mm slot standard aluminum extrusion profiles..

Check Stock

20pcs/lot Black 2020 Series L-Shape Interior Inside Corner Connector Joint Bracket with Screws for 20x20 Series Aluminum Extrusion Profile Slot 6mm

Packed: 20pcs L joints brackets + 40pcs set screws + 1 wrench for set screw,more convenient than L-Shape only..
Material: Electrophoresis Zinc alloy, has excellent features in high abrasion resistance, rust proof and stability..
Advantage:Concealed corner brace, the L corner bracket can be completely hidden in the slot of the aluminum extrusions..
Suitable for 2020 european standard aluminum profiles slot 6mm And other suitable size profiles..
Used for building industrial aluminum frame structures, 3D printers, CNC routers, laser engravers, robotics projects..

Check Stock

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

Package Includes: 22pcs 20mm corner brackets, 44pcs M5x10mm T-slot nuts, 44pcs M5x10mm flanged button head socket cap screws bolts, 50pcs flat washers and 50pcs lock washers..
2020 Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
The angle bracket is used to reinforce right-angle corner joints of aluminum extrusion profiles, insert the two ends of the bracket into the groove of the profile, and tighten the screw to fix the two profiles..
T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel, surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
304 stainless steel M5x10mm button head socket cap screws features anti-corrosion, rustless, high-hardnes. M5 flat washers and lock washers can be used to adjust the length..

Check Stock