Best Thermostat Housing Flange Bolts

Ingersoll Rand W7152-K22 20V 1/2

• CONTROL:Includes theIQV Power Control System with 4 modes: Full Power, Half Power, Wrench Tight, and Hand Tight. From axle nuts to oil pans, flange bolts to pre-torque joints theres no need to switch tools..
• DURABLE:Patented steel reinforced frame and impact-and-chemical resistant housing protects the W7152 from every day abuse. The IQV brushless motor delivers more power and efficiency than a brushed motor, providing longer tool life..
• ACCESS:8.1 short tip-to-tail design and 360 shadowless task light provides increased visibility and access..
• Tuned impact mechanism with 1500 ft-lb nut-busting torque and 1000 ft-lb of MAX torque.
• Robust and durable all-metal drivetrain and hammer mechanism optimized for maximum power and efficiency.
• Variable-speed switch (half and full power only) with electronic brake provides maximum control of the tool and increases safetyrelease trigger, drive stops spinning.
• 4 dimmable settings on the shadowless 360 LED light ring.
• Tough composite housing and patented steel-reinforced frame protects against aggressive fluids, chemicals and repeated drops.
• Ideally used for removing or fastening cradle bolts tire changing, fleet truck maintenance and in industrial and MRO settings.

maXpeedingrods Universal Street Performance GT35 GT3582 Turbo for 2.5L-6.0L Engine T3 AR.70 Anti-Surge Compressor Turbo Charger Bearing 600+HP Water + Oil cooled Billet Compressor Wheel

• 【Applicaiton】: Perfect for all 4/6 cylinder 2.5L-6.0L engine. Boost Horse Power up to 600HP..
• 【Specifications】: Exhaust (Turbo Manifold) Flange: T3 Flange & Exhaust (Downpipe) Flange: 4 Bolts. Cooling Type: Water + Oil cooled.
• 【Billet Compressor Wheel】: Forged full-machined billet aluminum compressor wheels with a larger horsepower range and better boost response.
• 【Upgrade High Quality Material】:1. "100% balancing Test" by TURBOTECHNICS VSR3. 2. Turbine housing ：Silicon-Molybdenum - temperature resistant....
• 【NOTE THAT】: Please lubricate the turbo bearing fully before installing, TO ADVOID SHAFT PLAY AND DAMAGE IF INSUFFICIENT OIL SUPPLY. Professional....

Kashaipu Exhaust 3" Exhaust Collector Flange Oval 2-Bolts Flanges Manifold Muffler Connect Cat-back 3" Inch ID Pipe (3" inch)

ATD Tools 3310 GM Thermostat Wrench

• The GM Thermostat Wrench is designed to work on GM 3.1 and 3.4 L V6 engines years 1994 to current.
• The wrench is a 13mm, 12 point with special bends specifically for GM V6 thermostat housings.
• A common job on these motors is thermostat replacement.
• To do this you must remove the thermostat housing and in these applications the bottom-housing bolt is almost inaccessible without removing other parts - until now.
• GM thermostat wrench with its unique shape and design will allow users to remove and install the housing in a fraction of the time it currently takes.

62pc Specbolt YZ YZF WR Body Bolt KIT for Yamaha Plastics, Seat, Fenders, Fork Guards Radiator shrouds bodywork YZ YZ-F WR YZ60 YZ80 YZ85 YZ125 YZ250 YF250F YZ400F YZ426F YZ450F YZF250 YZF450

• 62 factory fit flange bolts including a full set of OE matching wide head flange bolts and fork guard bolts.
• Original type reduced head flange bolts with factory matching zinc plating.
• Replace all your plastic body work bolts with Factory Matching fasteners.
• Used for plastics, body work, and seat for Yamaha off road Motorcycles.

70pc Specbolt fits CR CRF Body Bolt KIT for Plastics SEAT FENDERS SHROUDS. FITS CR85 CR125 CR250 CR500 & CRF150 CRF250 CRF450 R Models CRF150R CRF250R CRF450R

• 70 flange bolts including hard to find M5 shroud bolts and fork guard bolts.
• 24-M6 10.9 grade reduced head flange bolts with factory matching zinc plating.
• Seat bolts (3 sets), fork guard, shroud, and fender bolts.
• Professional grade heat treated fasteners.

Metric Class 8.8 Hex Cap Flange Frame Bolts & Flange Nuts Assortment Kit - 383 Pieces!

• 383 Pieces - High Quality Class 8.8 Flange Bolt & Nut Assortment!.
• Bolts: Metric Class 8.8 Hex Flange Bolts Zinc Yellow.
• Nuts: Matching Hex Flange Nuts CL8 Zinc Yellow.
• Heavy Duty Locking Steel 24 Hole Compartment Tray (Dim: 13-3/8" Width x 2" Height x 9-1/4" Depth).
• M6", M8" M10", & M12" Coarse Diameters Included (See photos for specific sizes).

Stant 25138 Thermostat Gasket

• Stant’s STAT LOK adhesive-backed thermostat gaskets cut installation time by as much as 50%.
• The adhesive backing holds the thermostat securely centered in the counter bore, leaving both hands free to align and bolt down the outlet casting.
• No sticky, toxic gasket cement is required.
• With a knuckle-saving Stant Stat Lok gasket holding the thermostat in place, the thermostat won’t drop out or become misaligned and cause the mounting flange of the outlet casting to crack..
• Gaskets are cut to specific application requirements..

Ingersoll Rand W7252-K22 20V High-torque 1/2' Drive Cordless Impact Wrench Kit, 1500 ft-lbs Nut-busting Torque, 2 Batteries and Charger, 2' Extended Anvil

• CONTROL: Includes the IQV Power Control System with 4 modes: Full Power, Half Power, Wrench Tight, and Hand Tight. From axle nuts to oil pans, flange bolts to pre-torque joints there’s no need to switch tools..
• DURABLE: Patented steel reinforced frame and impact-and-chemical resistant housing protects the W7252 from every day abuse. The IQV brushless motor delivers more power and efficiency than a brushed motor, providing longer tool life..
• ACCESS: 8.1” short tip-to-tail design and 360⁰ shadowless task light provides increased visibility and access..
• Tuned impact mechanism with 1500 ft-lb nut-busting torque and 1000 ft-lb of MAX torque.
• Robust and durable all-metal drivetrain and hammer mechanism optimized for maximum power and efficiency.
• Variable-speed switch (half and full power only) with electronic brake provides maximum control of the tool and increases safety—release trigger, drive stops spinning.
• 4 dimmable settings on the shadowless 360º LED light ring.
• Tough composite housing and patented steel-reinforced frame protects against aggressive fluids, chemicals and repeated drops.
• Ideally used for removing or fastening cradle bolts tire changing, fleet truck maintenance and in industrial and MRO settings.

ForeverPRO WRFT02 Universal Extra Thick Toilet Wax Ring Replacement Kit for Floor Outlet Toilet Bowl with Black Rubber Flange Funnel Water Tight Seal Gasket Accommodates 3 Inch and 4 Inch Waste Lines

• ✅ Compatible with most floor outlet toilets. This toilet seal ring is ready to use. Will not harden or deteriorate. Forms a water-tight seal. Toilet wax seal used with almost any toilet bowls.
• ✅ ForeverPRO soft and flexible high-grade wax toilet ring seal. Extra thick double wax toilet ring. Comes with One Year Warranty Guarantee or no questions asked 90 day return.
• ✅ Durable Premium Universal wax ring for toilet seal bowl with black rubber flange funnel water tight seal. Comes brand new in original retail packaging.
• ✅ Toilet wax seal ring kit has all necessary accessories including toilet wax ring, 2 brass bolts, 2 retainer washers, 2 metal washers, 2 locking nuts and 2 caps for easy DIY Installation.
• ✅ Directions: 1. Set the toilet bowl upside down on a soft non-abrasive surface. Place the ForeverPRO toilet gasket ring firmly in place around the discharge opening (with the polypropylene flange pointing away from the bowl). 2. Carefully lift the bowl over the toilet flange, line it up with the flange bolts and set it in place. Twist the bowl slightly to spread the wax gasket and use your body weight to seat the bowl on the floor. 3. Tighten the flange bolts, but do not over tighten.

76pc SPECBOLT Body Bolt KIT for Plastics seat fenders Fork Guards shrouds & subframe. Fits KTM & Husqvarna 65 80 85 125 150 200 250 350 400 450 500 520 525 SX SX-F XC XC-F XC-W XCF-W EX EXC EXC-F

• 76 matching factory fit flange bolts that fit: KTM Husqvarna.
• OE type torx head flange bolts with factory matching Dacromet plating.
• Generous selection of Original Factory Matching fasteners.
• Used for body work, plastics, seat, fork guards, and subframe on 2 and 4 stroke bikes.
• Complete with 2 styles Factory Match radiator shroud bolts gold screws and M5 flange bolt type.

M10-1.5 x 50mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel 18-8 (304), Plain Finish, DIN 6921, 5 PCS

• High quality Grade A2-70 Stainless Steel 18-8 (304) provides strength and offers good corrosion resistance in many environments..
• Flange bolts have a flange on the bottom of the head that distributes the load like a washer..
• Thread Diameter 10 mm, Thread Size 1.5 mm (M10), Screw Length 50 mm..
• Flanged Bolts are great to have around for use in wood and wet environments..

M8 x 20mm Flanged Hex Head Bolts Flange Hexagon Screws, Grade 10.9 Alloy Steel, Black Oxide Finish, Full Thread, 15 PCS

• High quality Grade 10.9 Alloy Steel provides strength and offers good corrosion resistance..
• Flange bolts have a flange on the bottom of the head that distributes the load like a washer..
• Thread Diameter 8 mm, Thread Size 1.25 mm (M8), Screw Length 20 mm (Head NOT Included)..
• Flanged Bolts are great to have around for use in wood and wet environments..