Best Thermostat Housing Gasket Kit

Hayward SPXHKIT12 Quick Pump Repair Replacement Kit for Hayward Power Flo/Power-Flo II Pool and Spa Pumps

  • Fits Hayward Power Flo SP1500 pump series models SP1500, SP1510, SP1511, SP1550, SP1575, EP1500 and pump strainer model SP1516.
  • Also fits SP1700 pump series models SP1705, SP1710, SP1711, SP1720, SP1725, SP1750, SP1775, SP1780.
  • Kit includes seal assembly with cup, strainer cover O-ring and housing O-ring.
  • Also includes strainer O-ring, housing gasket and housing O-ring gasket.
Check Stock

279816 Thermal Fuse & Thermostat Kit & 3977767 High Limit Thermostat & 3387134 Cycling Thermostat & 3392519 Thermal Fuse Cutoff Kit for Whirlpool & Kenmore Admiral Maytag Amana KitchenAid

  • Package Included: 1 x 3977767 High Limit Thermostat, 1 x 3387134 Cycling Thermostat, 1x 3392519 Thermal Fuse, 1 x 279816 Thermal Fuse & Thermostat Kit, 1 x Instruction Sheet..
  • ✅ 3977767 Dryer high limit thermostat – pushes onto the terminal of the heating element. Has one 1/4″ male terminal, 1/4″ female terminal, and one 3/16″ male terminal..
  • ✅ 3387134 Dryer cycling thermostat with internal bias heater – L155-25 (opens at 155F and closes at 130F). 3392519 Dryer non resettable thermal fuse – two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running..
  • ✅ 279816 Dryer thermal fuse (thermal cut-off) 309 degrees and high limit thermostat 250 degrees kit – Wiring is used if your old high limit thermostat has one terminal that presses onto the heating element. Includes thermal fuse, thermostat, screws, wiring kit, and instructions. Make sure to check your dryer vent for any restrictions..
  • ✅[Replaces Part Number]: High Limit Thermostat 3977767 WP3977767 3399693 898078 AP3131941 PS351925 EAP351925, Cycling Thermostat 3387134 WP3387134 ET187 3387135 33....
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Puri Tech Century Electric UST1102 1-Horsepower Up-Rated Round Flange Replacement Motor (Formerly A.O. Smith)

  • Replacement Motor and Seal Kit for Hayward Max-Flo 1HP.
  • GO-KIT-1 Includes: G-95 Housing Gasket, O-141 Diffuser Gasket, O-76 Lid Gasket, AS-1521 Seal.
  • Motor Features: Single Speed 115/230 Volts 15.0/7.5 Max Amps 1.10 Service Factor Threaded Shaft 56J Frame 3450 RPM 60 HZ.
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

Puri Tech Century UST1102 C- Face Motor w/PS-201 Seal

  • Replacement Motor and Seal Kit for Hayward Super II 1hp.
  • GO-KIT-2 Includes: G-235 Housing Gasket, O-141 Diffuser Gasket, O-12 Pump Lid O-Ring, AS-1521 Seal.
  • Motor Features: Single Speed, 115/230 Volts, 15.0/7.5 Max Amps, 1.10 Service Factor, Threaded Shaft, 56J Frame, 3450 RPM, 60 HZ.
Check Stock

Stant 25138 Thermostat Gasket

  • Stant’s STAT LOK adhesive-backed thermostat gaskets cut installation time by as much as 50%.
  • The adhesive backing holds the thermostat securely centered in the counter bore, leaving both hands free to align and bolt down the outlet casting.
  • No sticky, toxic gasket cement is required.
  • With a knuckle-saving Stant Stat Lok gasket holding the thermostat in place, the thermostat won’t drop out or become misaligned and cause the mounting flange of the outlet casting to crack..
  • Gaskets are cut to specific application requirements..
Check Stock

ATD Tools 3310 GM Thermostat Wrench

  • The GM Thermostat Wrench is designed to work on GM 3.1 and 3.4 L V6 engines years 1994 to current.
  • The wrench is a 13mm, 12 point with special bends specifically for GM V6 thermostat housings.
  • A common job on these motors is thermostat replacement.
  • To do this you must remove the thermostat housing and in these applications the bottom-housing bolt is almost inaccessible without removing other parts - until now.
  • GM thermostat wrench with its unique shape and design will allow users to remove and install the housing in a fraction of the time it currently takes.
Check Stock

279769 Dryer Thermal Cut-Off Kit, 3387134 Dryer Thermostat & 3392519 Thermal Fuse for Whirlpool Kenmore Dryers 3390291 3977394

  • This kit fits specific Whirlpool manufactured dryer models including Amana, Jenn Air, Kenmore, Magic Chef, and Maytag..
  • 279679 Thermal Cut Off Kit replaces 279548, 2796769, 2821, 3387812, 3389946, 3398671, 3977394, 695563, 80001, AH334278, AP3094224, EA334278, PS334278..
  • 3387134 Thermostat is an Operating Thermostat rated at L155*-25* differential, with a 250 Volt 2 Watt Heat Anticipator. The 2 outside terminals are 1/4″ male & the 2 inside terminals are 3/16″ male. Replaces part numbers 3387134, 3-6910, 306910, 3387135, 3387139, AP3131939, AP6008270, ET187, PS344510 and PS11741405..
  • 3392519 thermal fuse is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins is no longer present. Terminal size is 3/16″. Replaces part numbers AP3132867, 2986, 3388651, 694511, 80005, AH345113, EA345113, ET401, PS345113..
  • Package includes: 1 * 279679 Thermal Cut Off Kit, 1 * 3387134 Thermostat, 1 * 3392519 Thermal Fuse. ( Non-OEM ).
Check Stock

Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, and Mobile Water Supply

  • 【REPLACE PART NUMBER】 Water pump & gasket : 16100-09201丨 Hydraulic tensioner : 13540-50030丨 Thermostat : 90916-03100丨 Tensioner roller / pulley : 13503-0F010 / 13503-50011 | Idler roller / pulley : 13505-0F010 / 13505-50030丨 Front camshaft seals : 90311-38065丨 Front crankshaft seal : 90311-A0001丨 Timing belt : 13568-09070丨 Serpentine drive belt :90916-02586.
  • 【FIT FOR LEXUS】 1998-2000 GS400 丨 2001-2007 GS430 丨 2003-2009 GX470 丨 1990-2000 LS400 丨 2001-2006 LS430 丨 1998-2007 LX470 丨 1992-2000 SC400 丨 2002-2010 SC430.
  • 【FIT FOR TOYOTA 】 2003-2009 4RUNNER 丨1998-2007 LAND CRUISER 丨2001-2009 SEQUOIA 丨 2000-2009 TUNDRA.
  • 【WHAT WILL YOU GET】 1*Water Pump Gasket丨 1*Hydraulic Tensioner 丨1* Thermostat 丨 1*Tensioner Roller丨 1*Idler Roller丨 2*Front Camshaft Seals丨 1* Front Crankshaft Seal丨 1*Timing Belt丨 1*Serpentine Drive Belt丨 Totally 10 Pieces Set of Timing Belt Water Pump Kit.
  • 【SALE SERVICE】 Please Check Carefully Whether the Oe Number of Our Product Is Applicable to Your Vehicle‘s Model Before Purchasing. Whenever I....
Check Stock

Puri Tech Replacement Motor Kit for Hayward Super Pump 1.5 HP SP2610x15 AO Smith UST1152 w/GO-KIT-3

  • Replacement Motor and Seal Kit for Hayward Super Pump 1.5 HP SP2610x15.
  • GO-KIT-3 includes :G-95 Housing Gasket O-141 Diffuser Gasket O-177 Lid Gasket AS-1521 Seal.
  • Single Speed 115/230 Volts 18.6/9.3 Max Amps 1.00 Service Factor Threaded Shaft 56J Frame 3450 RPM 60 HZ.
Check Stock

Pentair Replacement Kit Pool and Spa Inground Pump, Almond

  • Fits Pentair WhisperFlo, IntelliFlo VF, VS 3050, VS-SVRS pool and spa inground pumps.
  • Also Includes Almond gasket for seal plate, black gasket for seal plate, lid, see thru WF, lid, chemical resistant, clamp cam and ramp WF.
  • measures 19-1/4-inch length by 15-1/4-inch height by 14-1/4-inch width.
  • Includes basket WF, bolt, foot WF, foot insert WF pump, plug drain WFE, o-ring, o-ring lid, housing WFE, seal plate kit.
Check Stock

Qiilu Engine Coolant Thermostat, Engine Cool Thermostat for Peugeot 206 306 307 806 1007 Bipper Expert 336N5 1336Q1 1336.N5

  • Fitment ---- The thermostat housing is designed specifically for for Peugeot 206 306 307 806 1007 Bipper Expert. Please carefully check the model of your vehicle with our fitment decription.
  • Replacement OE Number ---- The manufacturer part number of thermostat is336N5, 1336.Q1, 1336Q1, 1336.N5. Our product meets or exceeds OEM specification in manufacturing and materials.
  • Powerful function ---- Thermostat is based on the temperature of cooling water automatically adjust the amount of water into the radiator, change the water cycle range, in order to adjust the cooling capacity of the cooling system, ensure that the engine works in the appropriate temperature range.
  • Advanced technology ---- Engine Coolant Thermostat Apply the latest design and advanced technology, ensure thermostats control engine coolant and inlet temperature efficiently.
  • Premium quality ---- Engine Coolant Thermostat is made of high quality metal and plastic material, which features corrosion resistant and high temperature resistant.High quality aftermarket thermostat kit is a necessary part for your vehicle.
Check Stock