Categories

Best Thin Kerf Table Saw Blade 2

CMT 230.524.08 Precision Dado Set, 8-Inch X 24 Teeth FTG+ATB Grind with 5/8-Inch. Bore

  • Thin Kerf Ultimate Plywood and Melamine Saw Blade.
Check Stock

9-Inch 5-Pack and 6-Inch 7-Pack Wood Pruning Saw Blades for Reciprocating/Sawzall Saws - 12 Pack

  • 10-Inch 50 Tooth ATB Thin Kerf Combination Saw Blade.
Check Stock

Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

  • TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade.
Check Stock

Jet, Small Grizzly, Powermatic 64 Table Saw Zero Clearance Insert by Peachtree Woodworking PW956 Approx Dims 12-1/2 in x 3-1/2 in x 7/16 in

  • MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown..
  • If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade..
  • Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywoo....
Check Stock

Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening

  • MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and....
  • If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate....
  • Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without....
  • Zero Clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. You can....
  • This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. The....
Check Stock

3Pack 4-1/2-Inch 40T TCT Circular Saw Blade with 7/8-Inch Arbor, Carbide Tipped Teeth General Purpose Hard & Soft Wood Cutting Saw Blade for Angle Grinder

  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life..
  • EFFECTIVE: Sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Perfect choice for a circular saw, miter saw, table saw when needed for ripping and crosscutting. MAX RPM up to 13,500..
  • APPLICATING: General purpose Hard & Soft wood cutting saw blade. for long-lasting cuts in wood, plastic, and composite materials..
  • WHAT YOU GET: 3 Pack 4-1/2-Inch 40T TCT Carbide-Tipped Circular Saw Blade. The saw blades can be used with Angle Grinder, Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
Check Stock

IRWIN Tools MARATHON Carbide Cordless Circular Saw Blade, 6 1/2-Inch, 24T, .063-inch Kerf (24029CL)

  • Circular saw blades have an ultra-thin kerf for more cuts per charge.
  • Each circular saw blade has face-ground, carbide-tipped teeth that produce fast, clean cuts.
  • Aggressive, 22° hook angle for swift cuts.
  • Construction-grade teeth provide longer life.
  • Circular saw blades are designed for framing and ripping.
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 12-Inch, 80T (14083)

  • Ultra-thin kerf delivers more cuts per charge and extends cordless tool battery life..
  • 400 grit diamond-ground construction-grade carbide teeth make for fast, clean cuts and long tool life. The aggressive hook angle cuts fast..
  • Blade is precision-tensioned and balanced for optimal performance with miter and table saws where smooth finish and accurate cuts are critical..
  • 80 tooth count blades are ideal for making exceptionally smooth cuts in MDF or other thin laminates without blowout..
Check Stock

OA-BRES 7-1/4-Inch 60-Tooth Circular Saw Blade with 5/8-Inch Arbor, TCT ATB Finish Blade for Wood Cutting (2-Pack)

  • DIMENSIONS: 2 PACK 7-1/4 Inch 60T Finish Saw Blade, 5/8 inch Arbor, with a nice storage case..
  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life..
  • EFFECTIVE: Incorporates an ATB (Alternating Top Bevel) offset tooth design, sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results..
  • APPLICATING: General purpose Hard & Soft wood cutting saw blade. for long-lasting cuts in plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP..
  • COMPATIBILITY: Can used in corded and cordless circular saws, miter saw and table saw..
Check Stock

Leecraft JT-164 Jet/Powermatic 64A Zero-Clearance Table Saw Insert, Color may vary

  • Significantly reduces saw noise, dust, chip-out, and splintering.
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged.
  • Kerf serves as handy stock alignment guide.
Check Stock

Overpeak 10 inch Circular Saw Blade, 80 Tooth ATB Finishing Saw Blades with 5/8-Inch Arbor, Laser-Cut Thin Kerf and Anti-Rust Coating

  • ▲Material – OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades.
  • ▲Alternate-Top Bevel Teeth – The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother.
  • ▲Low Noise & Cutting Stable – 4 Laser cut expansion slots vents trap noise and vibration, keeping it cool and reducing blade warp.
  • ▲General Usage – The Overpeak 10 inch carbide blade is 80 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate.
  • ▲Thin kerf – Thin kerf for fast and smooth cutting action and minimum waste. If you have any problem with our 10 inch saw blade, pls tell us freely.
Check Stock

5-4/5' 52 Teeth Carbide Tip Circular Saw Blades Radial Arm Saw Blade Table Saw Blade Miter Saw Blades with 4/5' Arbor for Woodworking

  • Saw Blades Specifications - 5-4/5" Ultra-thin kerf Wood Cutting Circular Saw Blade for fast cutting, Teeth: 52T, Diameter: 5-4/5"/ 147mm, Arbor: 4/5"(20mm), HI-Density Carbide Tip for Maximum Performance.
  • MAX RPM - 10000, Kerf: 0.055"/1.4mm, Hook Angle(forward): 20 Degree, Tooth design: ATB, Fast and Smooth Cuts..
  • ATB Tooth Design to facilitate splinter discharge and to prevent the saw blade from being blocked by sawdust, make cutting easier. Extra-hard steel blade body - delivers accuracy and resists bending and deflection for true cuts..
  • Laser cutting Anti-Vibration Slots can drastically reduce vibration and sideways movement during the cutting process, Also help channel heat build-up during the cutting process, allowing the blade to expand and contract, extending the blade life..
  • Upgraded to Teflon surface coating, strong non-stickiness, lowest friction coefficient, anti-adsorption, high-temperature resistance. Smooth and efficient rotation..
  • Ideal for ripping and crosscutting on softwood, hardwood, plywood, chipboard with fine finishing, not for metal cutting. Widely use for Circular Saws, Miter Saws, Table Saws, Hand Saws, and Chop Saws, save your time and energy..
Check Stock

DEWALT 12-Inch Miter Saw Blade, Crosscutting, Tungsten Carbide, 80-Tooth, 2-Pack (DW3128P5)

  • ACCURATE CUTS: DEWALT DW3128P5 80-Tooth 12 Inches Crosscutting Tungsten Carbide Miter Saw Blade 2 Pack, helps you make quick, smooth, and accurate cuts.
  • TUNGSTEN CARBIDE: Tougher tungsten carbide stays sharper longer.
  • THIN KERF: Thin kerf for fast and smooth cutting action.
  • BLADE VERSATILITY: 1 blade with 80 teeth and 1 with 32 teeth for added versatility.
  • REDUCED VIBRATION: Includes carrying bag for easy portability and storage.
  • WARRANTY: Backed by a 3-year limited warranty.
Check Stock