Categories

Best Thin Low Carbon Steel

Tojiro DP Damascus 8.25-inch Chef s Knife

  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of....
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
  • cleans vegetables, minces herbs, chops, etc.
Check Stock

Misono Swedish Carbon Steel Gyutou 9.4\ (24cm)

  • HIGHEST GRADE CARBON STEEL ✅: Misono uses Swedish carbon steel, considered to be one of the purest form of carbon steel..
  • HAND FORGED ✅: Misono has professionals in Sakai city hammer the carbon steel sheets to strengthened the steel exactly like traditional Japanese knives. This carefully made line are decorated with an elegant dragon engraving on the face of the chef knives and slicers in the Swedish Carbon line..
  • RAZOR SHARP BUT ONE MUST TAKE CARE OF THEIR KNIVES ✅: Carbon knives are non stain resistant.
  • MULTI-PURPOSE ✅: The gyutou is a versatile chef's knife. It can be used for cutting meat, fish and vegetables, making it suitable for preparing Western cuisine. Lightweight and thin, Japanese chef knives have a sharper blade and maintain their sharpness longer than most other chef knives..
  • EXCEPTIONAL SHARPNESS ✅: 70:30 Asymmetrical bevel. By concentrating the sharpening on the face of the blade at a steeper angle than on the back, a thin cutting edge is created that approaches the sharpness of a traditional Japanese single edged design..
Check Stock

ANDELI MIG Welder 220V MIG TIG MMA and Cold Welding 4 in 1 Multi-function Welding Machine MIG-270TPL Package 6

  • 【Function】MIG(CO2/MIX/FLUX) , TIG(HF), COLD, MMA..
  • 【COLD】The welding effect of stainless steel is silver-white weld bead in cold welding mode..
  • 【Applicable Material】This welding machine is suitable for ordinary thin steel, iron, stainless steel，low-carbon steel and etc.. Can not weld....
  • 【Delivery Package】Full suit: MIG-270TPL with USA plug, ground clamp 2m, 15AK MIG torch 3M, gas pip 3M, carbon steel wire 1kg, nozzle*30, nozzle....
  • 【Safety】Efficient customer service team, if you encounter problems when receiving the goods, you can contact us for free guidance. We will provide....
Check Stock

Timber Wolf 99 3/4\ x 1/4\ Band Saw Blade

  • FREE SHIPPING on $99 or more from PS WOOD MACHINES within the continental USA.
Check Stock

Gun Brushes 12 Piece Gun Cleaning Kits Includes Double-Ended Brush Cleaning Picks Cleaning Patches 6 Inch Cotton Swabs and 20ML Oiler

  • 【Double-ended Brushes Nylon Brass and Steel Brushes】Softer nylon and medium brass brushes are great for removing any residue on the surface. The steel bristles are hard enough to easily remove any agglomerated carbon. The thin end is very useful for cleaning in narrow places..
  • 【4 Multifunction Head Pickss】 - Each Double-ended pick has different sharped tool at end,and they're potentially useful for different parts of different guns.They work perfectly for reaching into tiny space areas (gas blocks,bolt carriers etc) to easily remove any caked on carbon without scratching metal,pry loose tight fitting parts or grip shell case in chamber,more you can imagine..
  • 【1 Stainless Steel Polymer Picks】Unlike ordinary dentist tools, this stainless steel double-headed pick has a hook that can penetrate deep into the gap to clean the internal area, One end is a mini shovel that can remove carbon/residues and other stubborn dirt..
  • 【100 Pcs Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..
  • 【50 Pieces cleaning patches 2.95X2.95 inches 7.5X7.5cm】Quality cotton patches for cleaning your gun.....
Check Stock

6 Inch HSS BI Metal Hole Saw Cutter 1-1/2" Depth with Big Arbor for Wood Metal

  • 2,Longer life: Can drill 30 holes(up to) in 0.12" low carbon steel plate..
  • 3, Bi-metal strip is made by laser welding machine and vacuum heat treatment, providing better hardness, strength, and longer life..
  • 4, Ideal for Wood, Plasterboard, PVC, MDF, Drywall, Aluminum, Thin Metal, Thin Stainless Steel..
  • 5, Package: 1 of 6” 152mm hole saw bit. 1 of 0.43” hex shank large mandrel , 1 of 3.5" silver HSS pilot drill bit for wood ,soft metal. 1 of 3.5" black HSS pilot drill bit for hard metal..
Check Stock

SOFIALXC Carbon Fiber Woven Cloth Braid Belt Fabric Width 30mm,Length100CM,300G/㎡

  • - Material: 100% 3K good quality all Carbon Fiber Fabric Cloth 300g/m².
  • - Carbon fiber cloth is light in weight, his quality is only One quarter of ordinary steel。.
  • - High strength, low density, thin thickness and convenient construction..
  • - Mainly used in aircraft main, tail and body.
  • automotive engine synchronizer, hood, bumpers, decorative pieces.
Check Stock

ANDELI 110/220V Cold Welder TIG Welding Machine with Cold/Hot/TIG Pulse MOS Tube Cold Welding Machine TIG-250MPL

  • 【Cold welding machine】It is suitable for welding thin stainless steel, thin steel, carbon steel, and other materials. The welding temperature is....
  • 【Pulse function】Using the pulse function, the welding current will continuously drop from high current to low current, and then return....
  • 【Multi-function welding】 Cold welding, argon arc welding, pulse welding and dual-voltage welding machines are powerful assistants in welding, with....
  • 【About current】Please note that the maximum amperage of different voltages is different, the maximum current of 110V is 140A, and the maximum....
  • 【Delivery Package】110/220V TIG-250MPL, ground clamp 2m, COLD torch WP-9F 4m, TIG torch WP-17F 4m, gas pipe 3m, nozzle*20, collet*20, house....
Check Stock

TaylorMade 2021 P790 UDI Iron 2

  • ...9% lighter than its predecessor. It provides up to 3.5g of weight savings that has been redistributed to further optimize mass properties for better launch conditions. The new formulation delivers a sweet sound and solid feel while delivering a fast, flexible face..
  • A 8620 carbon steel construction makes the head thinner in strategic locations, allowing for an incredibly low CG placement. It pairs with a responsive 1.65mm forged 4140 steel L-Face to promote supreme flexibility, fast ball speeds and distance while upholding a premium forged feel..
  • The Thru-Slot Speed Pocket provides increased face flexibility while preserving ball speed and distance on low face strikes..
  • Engineers developed new construction methods to thin out the body, allowing for 22g of tungsten to be placed in the toe. It creates a massive amount of stability and forgiveness wrapped in a players package..
Check Stock

Original Speculaas - Hellema Dutch Spiced Cookies Bubble Wrapped and Boxed with Ribbon - 14.1 Oz

  • ...erent function, so you can discard the extra accessories you will never use. Easily clean a variety of pistols, rifles, and shotguns..
  • 【Double-ended Brushes Nylon and Steel Brushes】Softer nylon are great for removing any residue on the surface. The steel bristles are hard enough to easily remove any agglomerated carbon. The thin end is very useful for cleaning in narrow places..
  • 【2 Stainless Steel Multifunction Head Pickss】 - Unlike ordinary dentist tools,Each Double-ended pick has different sharped tool at end,and they're potentially useful for different parts of different guns. for reaching into tiny space areas (gas blocks,bolt carriers etc) to easily remove any caked on carbon without scratching metal,pry loose tight fitting parts or grip shell case in chamber,more you can imagine..
  • 【100 Pcs Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..
  • 【100 Pcs Bamboo Handle Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils.....
Check Stock

VIVOHOME 110V 1600W Electric Handheld Paint Cement Mortar Mixer Machine with 7 Adjustable Speed

  • PREMIUM MATERIAL - Crafted with lightweight, durable material and a carbon steel mixing rod, this grout mixer is of high quality.
  • Suitable for mixing oil paint, cement, fodder, resins, printing ink, thin-set mortar, plaster, cementitious adhesives, and other materials.
  • DUAL-PADDLE DESIGN - Equipped with a powerful 1600W motor and a screw shaped dual-paddle, the machine mixes effectively and thoroughly, which greatly saves your time and prevents the mortar from splashing everywhere.
  • The cement mixer will automatically power off when the machine is overheated.
  • SPEED ADJUSTMENT - With a 2-speed gearbox (high and low), each features a 7-speed progressive switch (MIN, 1, 2, 3, 4, 5, MAX).
  • You can set different speeds depending on the stickiness of the material.
  • The high gear runs at 380-850RMP, while the low gear runs at 240-500RMP.
  • LABOR-SAVING - Designed with dual ergonomic steering wheel handles on both sides and a sink motor, it takes minimum effort and achieves maximum efficiency.
  • High comfortable and stable handle limits the vibration of the mixer for less fatigue to the user when operating manually.
  • COMPLETE KIT - Comes with 2 carbon brushes, 2 wrenches and an instruction manual that makes it easy to install and use the mixer.
Check Stock

CDBP GTN-2 (SP200) CNC Grooving Carbide Inserts Steel Fit for SPB226/232 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs

  • Size, SP200,Width(B): 2.18mm, Radius(R): 0.2mm, Longth(L): 8.9mm, fit for Korloy grooving holder..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting.
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

Taylormade 2021 P790 Iron Set

  • ...ighter than its predecessor. It provides up to 3.5g of weight savings that has been redistributed to further optimize mass properties for better launch conditions. The new formulation delivers a sweet sound and solid feel while delivering a fast, flexible face..
  • A new 8620 carbon steel construction makes the head thinner by up to 37.5% in strategic locations, allowing for a significantly lower CG placement. This new thin-walled design pairs with a responsive 1.5mm forged 4140 steel L-Face to promote supreme flexibility, fast ball speeds and distance while upholding a premium forged feel..
  • The Thru-Slot Speed Pocket provides increased face flexibility while preserving ball speed and distance on low face strikes..
  • The sweet spot size has been increased by up to 60% compared to the original P790. Using data analytics, we have repositioned the sweet spot lower on the face to naturally capture more shots and provide performance where golfers need it most..
  • Engineers developed new construction methods to thin out the body, allowing for up to 31g of tungsten to be placed in the toe. ....
Check Stock