Categories

Best Thin Type Cylinder

901901 Piston Bumper fit for Porter Cable FR350 FC350

  • 901901 Piston Bumper fit for Porter Cable FR350 FC350..
  • This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • This Piston Bumper is located Cylinder Cap of nail guns..
  • Fit For FC350 Type 1, FC350 Type 2, FC350 Type 3, Fit For FR350 Type 1, FR350 Type 2, FR350 Type 3, Does NOT WORK for the FR350A model..
Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock

901901 Piston Bumper fit for Porter Cable FR350 FC350 (2 Pack)

  • 901901 Piston Bumper fit for Porter Cable FR350 FC350..
  • This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • This Piston Bumper is located Cylinder Cap of nail guns..
  • Fit For FC350 Type 1, FC350 Type 2, FC350 Type 3, Fit For FR350 Type 1, FR350 Type 2, FR350 Type 3, Does NOT WORK for the FR350A model..
Check Stock

Blossom Roll on Lip Gloss, Infused with Real Flowers, Made in USA, 0.20 fl. oz./5.9ml, Watermelon

  • Each Fruity Cylinder is Infused With Vitamin-E.
  • Gloss Applies in Thin Even Coats That Lay Evenly on the Lips For a Brilliant Finish.
  • Complete Set of All 6 Flavors Included in This Set.
  • Composite Non-Glass Roller Baller Type Applicator.
  • Grape*Strawberry*Pineapple*Watermelon*Peach*Cherry.
Check Stock

Piston Bumper Stop 901901 Compatible with Porter Cable FC350 FR350

  • Compatible with FC350 Clipped Head Framing Nailer Kit,FC350 Type 1 Framing Nailer Clip,FC350 Type 2 Framing Nailer Clip,FC350 Type 3 Framing Nailer Clip.
  • Compatible with FR350 Round Head Framing Nailer Kit, FR350 Type 1 Framing Nailer Round, FR350 Type 2 Framing Nailer Round,FR350 Type 3 Framing Nailer Round.
  • This Part Acts as a Cushion When The Piston/Driver Retracts Back Into The Cylinder After Being Fired.This Piston Bumper is Located Cylinder Cap of Nail Guns..
  • Warning:It does not fit FR350 MAG Type 1 nailers!!!.
Check Stock

901901 Piston Bumper Compatible with Porter Cable FR350 FC350 (1)

  • Piston Bumper Part Number: 901901, 886151, this Piston Bumper is located Cylinder Cap of nail guns..
  • Compatible with FC350 Type 1, FC350 Type 2, FC350 Type 3, FR350 Type 1 Round Head Framing Nailer, FR350 Type 2 Round Head Framing Nailer, FR350 Type 3 Round Head Framing Nailer..
  • The Product Function: This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • Purchase Notes:Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..
Check Stock

Raybestos BH381116 Professional Grade Hydraulic Brake Hose

  • Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
  • This hose meets federal standards to ensure performance and safety, while providing longer hose life.
  • It utilizes premium fittings to ensure a good hydraulic seal.
  • Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

  • 15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
  • Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
  • Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
  • Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

TAILONZ PNEUMATIC 25mm Bore 50mm Stroke Pneumatic Small Thin Cylinder Aluminum Pneumatic Air Cylinder SDA25-50

  • 【Model】Pneumatic Small Thin Cylinder.
  • 【Working Pressure:】0-1.0mpa | 0-145psi..
  • 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..
Check Stock

TAILONZ PNEUMATIC 32mm Bore 25mm Stroke Pneumatic Small Thin Cylinder Aluminum Pneumatic Air Cylinder SDA32-25

  • 【Model】Pneumatic Small Thin Cylinder.
  • 【Working Pressure:】0-1.0mpa | 0-145psi..
  • 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..
Check Stock

VEVOR Liner Puller Cylinder Liner Puller, Diesel Engines Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 75 mm-138 mm, Universal Cylinder Liner Puller Tool Set for Auto Repair

  • 75-138 MM Cylinder Liner: This cylinder puller is suitable for all cylinders with a 75-138 mm diameter. Both dry type and wet type can be used. It's ideal for the disassembly of diesel cylinder liner quickly and securely..
  • Premium Pull Plate: Our products are equipped with a total of 7 pcs pull plates (75-80 mm, 85-90 mm, 95-100 mm, 105-110 mm, 115-120 mm, 125-130 mm, 135-138 mm), which have a more extensive disassembly range and more comprehensive functions. 7 pcs pull plates are all cut from 45# steel, thickened, and hardened..
  • Rigid Construction: The manual liner puller is made of premium steel and processed by quenching. It is sturdy, corrosion-proof, and has stable performance. The lead screw and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the cylinder liner, including pull plates, bearing, cross arm, branch pipe, connecting rod, nuts, and pull root. And it's easy to operate..
  • Wide Application: This tool is designed to quickly remove the cylinder liner and reduce the damage to the cylinder in the process. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

Stanley Hardware 73-0860 Center Mount Garage Door Dead Bolt

  • Decorative Home Hardware That Adds A Finishing Touch To Any Room.
  • Inside lock with heavy duty steel spring bolt.
  • Key cylinder has a solid brass 5 pin tumbler with cylinder ring.
  • Will replace most locking mechanisms of this type.
Check Stock

Emtek Pocket Door Privacy Lock Set, Satin Nickel

  • Emtek Hardware Deadbolt Single Cylinder Square Solid Brass Modern Style. Each order includes 2 BACKSETS for your convenience: Standard 2-3/8" and Extended 2-3/4".
  • Single Cylinder Deadbolt = NON-HANDED (Left, Right, Reversible)..
  • Includes Mounting Screws PLUS extension collar for thin doors.
  • Emtek Fashionable Deadbolts will definitely enhance your home’s design which is indeed an extension of your personal style and taste.
  • Standard Door Thickness: 1-3/4”- 2-1/8”.
Check Stock