Kitchen Faucet Head Replacement, Kitchen Sink Faucet Replacement Parts, Kitchen Faucet Sprayer Nozzle, Splash-proof Spayer Head, Pull-out Sprayer Head, 3-Function, Matte Black PAKING PB3002

  • THREE-FUNCTION SPRAYER HEAD: 1.Stream Flow rate: 1.8 GPM.
  • 3. Sweep Spray.  The splash-proof spray design is the biggest feature of the nozzle, which is so soft and delicate that it produces little splashes to the kitchen sink..
  • NON-RETURN VALVE DESIGN: Built-in non-return valve works to prevent water backflow. It immediately shuts off the water when the kitchen faucet is switched off, with no more dripping..
  • SPRAYER HEAD CONNECTION: The connection (outer diameter) of our sink faucet head is G1/2" male thread size and the 5/8 UNEF without the connector for options. Please confrim the thread size before ordering..
  • SPRAYER HEAD CONNECTION: The connection (outer diameter) of our sink faucet head is G1/2" male thread size and the 5/8 UNEF without the connector for options..
  • DIMENSION: Overall Width: 6.69 '' Thread Height: 0.5 '' Overall Height Exclusive the Thread: 3.93'' Connection attached to the hose: G1/2 male thread size.
Check Stock

Fafeicy 20Pcs Threaded Insert, Stainless Steel SUS303 Self Tapping Screw Insertt, for Parts That Requires Frequent Removing, M3 x 6mm

  • Inner Thread Size: M3(diameter) x 0.5(pitch).
  • Outer Thread Size: M5(diameter) x 0.5(pitch).
  • Threaded Inserts is used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • Threaded Inserts are used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • Threaded Inserts is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • Threaded Inserts can be installed directly and do not need you to tap a thread first..
Check Stock

60pcs Thread Insert Kit 304 Stainless Steel Wire Screw Sleeve Thread Repair Insert Assortment Kit

  • USED FOR:Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • A CERTAIN ELASTIC:Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • BETTER THAN THE NORMAL LOCKING DEVICE:The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • CAN BE USED REPEATEDLY:The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw, and can be used repeatedly.
  • EXCELLENT CONNECTION PERFORMANCE:Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

50pcs Stainless Steel Coiled Wire Helical Screw Thread Repair Insert Assortment Kit M8 x 1.25 x 1.5D Length

  • It is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • Used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole..
  • We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

100PCS M10 Wire Screw Sleeve,Thread Repair Insert Kit,Stainless Steel Thread Locking Inserts,for Aircraft, Automotive, mechanized Fasteners

  • Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
  • Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

Propane Torch Hose Weed Burner Hose Weed Torch Hose Heating Torch Extension Hose (6.5 Feet)

  • -Note: POL connection propane tank. Thread diameter at the other end: 5 / 8 (reverse thread / left-hand thread).
  • -Note: This hose for propane heating torches only..
  • -Connection: Ball seat reverse internal thread swivel fitting with leather ring to prevent gas leakage..
  • -Specification: rubber& solid brass, 6.5 feet-long, long-lasting rubber and solid brass fittings. Working Pressure: 0-350 PSI.
  • -CSA certification ensures excellent sealing quality..
Check Stock

Ceaeso Kitchen Sink Faucet to Garden Hose Adapter ,360 Degree Swivel Faucet Adapter kit with Breather, Brass 3/4" GHT Garden Hose Adapter for Male and Female Threads, Chrome Finish.…

  • ...ilt-in aerator, allows you to connect your garden hose when needed without removing the faucet aerator, it is so practical you will want this adapter for your faucet..
  • Upgraded Universal Adapters:3/4" GHT female thread to M22 (55/64"-27) male thread adapter for connection to outdoor bibb taps, M24 (15/16" -27) male thread to M22 (55/64"-27) male thread adapter for connection to M24 (15/16" -27) -27) female thread faucet. Self-contained M22 (55/64"-27) female thread for connection to M22 (55/64"-27) male thread faucets..
  • 360° rotating faucet adapter: The faucet adapter can be rotated 360 degrees to easily reach any place where water needs to be sprayed, preventing the hose from bending and knotting for a comfortable using experience..
  • quality material: made of quality solid material: made of solid brass material, polished chrome plated surface, wear-resistant and durable. Precision processing, long term use, no leakage, no sharp edges..
  • Widely used: It can be used to connect garden hose, portable washing machine, balcony sprinkler, pet bath....
Check Stock

Happyreise Sink Faucet Adapter Kit,360 Degree Swivel Faucet to Garden Hose Adapter with Aerator,Sink Faucet Adapter to Garden Hose for Bathroom Kitchen,3/4" GHT Thread Chrome

  • ... your faucet have two functions, which can connect the garden hose or discharge water normally, and do not need to remove and connect the adapter every time. It is very practical.
  • Various adapters: 3/4" GHT female thread to M22 (55/64"-27) male thread adapter for connection to outdoor bibb taps, M24 (15/16" -27) male thread to M22 (55/64"-27) male thread adapter for connection to M24 (15/16" -27) -27) female thread faucet. Self-contained M22 (55/64"-27) female thread for connection to M22 (55/64"-27) male thread faucets..
  • Large angle: The brass rotating balls can rotate 360 °, allowing you to control the direction of water flow at will, When connecting garden hose, the hose can also reach the most appropriate angle to prevent bending and knotting of hose..
  • Widely used: It can be used to connect garden hoses, portable washing machine, balcony watering, pet bathing, etc..
  • Quality material: The adapter is made of high quality brass, chrome plated, strong and corrosion resistant, and can be used for a long time.
Check Stock

Screw Repair Sleeve Assortment Kit Thread Repair Insert Assortment Kit Steel Screw Repair Sleeve 60pcs 304 Stainless Steel Threaded Insert Insert nut Wood Screw Set

  • Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw, and can be used repeatedly.
  • Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

100pcs Stainless Steel SS304 Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 2D Length for Helical Repair

  • Helicoil thread repair kit is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • The steel thread inserts can effectively improve screw connection, greatly improving the reliability..
  • M8 helicoil is suitable for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • Helicoil m8x1.25 can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
  • Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage..
Check Stock

3/4 Inch GHT thread Garden Hose Adapter with Aerator, 360 Degree Swivel Faucet to Garden Hose Adapter,Sink Garden Hose Attachment Connection for Bathroom Kitchen

  • Use upgrade: The garden hose adapter has two kinds of threads, which not only allows to connect the faucet to the 3/4 inch garden hose,The 55/64 "x27 male thread of garden hose to faucet adapter can also be connected to the faucet aerator..
  • ①Self-contained M22 (55/64" x 27) female thread for connection to M22 (55/64" x 27) male thread faucets..
  • ②Extra M24 (15/16" x 27) male thread to M22 (55/64" x 27) male thread adapter for connection the M24 (15/16" x 27) female thread faucet..
  • 360 Degree Swivel Adapter:when connecting the garden hose, the rotating ball can rotate 360 degrees to prevent the hose knotting from affecting the water flow speed..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 3/8\-16 Internal Threads, 1/2\-13 External Threads, 0.500\ Length, Made in US (Pack of 10)

  • USED FOR:Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • A CERTAIN ELASTIC:Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • BETTER THAN THE NORMAL LOCKING DEVICE:The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • CAN BE USED REPEATEDLY:The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
  • EXCELLENT CONNECTION PERFORMANCE:Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

GOVALVE Brass Bulkhead Fitting - 3/4” NPT Female x 1” Straight Male Thread Water Tank Connector with 2 Rubber Rings for Water Tower Tank Barrels

  • 3/4" NPT Female thread. 1" Straight Male thread.Thread is smooth without burr..
  • Made of brass. Not easy to corrode. Even if used for a long time, it will not rust..
  • Threaded connection. Provide tighter connection. Easy installation without complex tools. Can be connected with faucet and other pipe fittings..
  • Rubber gaskets. Double sided protection, more stable connection and better sealing effect..
  • Widely used: commonly used in water tanks, towers, water storage barrels, rain buckets..
Check Stock