RIDGID 71687 614 Circular Saw, Dry Cut Saw Features Large 14-inch Carbide-Tipped Blades for Cutting Steel, Copper, Aluminum, Plastic or Wood
- Specially formulated thread oil to cool pipes and rod shafts during the threading operation and extend the life of the threading machine.
- Designed for use with the RIDGID 418 Oiler Gun to help ensure a cleaner, more consistent application process.
- Improves the overall thread quality by reducing torque during the threading process and allowing for faster removal of the metal.
- RIDGID threading oil has minimal odor and its anti-mist formulation helps ensure a cleaner operation.
- This thread cutting oil is safe for longer continual use because it’s free of chlorine, halogens, PCBs and heavy metals.
Check StockBLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies
- Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
- 3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
- The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
- POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
- AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
- SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..
Check Stock(200) 5/16-18x2 1/2 Flat Head Trailer Floorboard Deck Screw T40 Torx Plain
- Diameter/Pitch: 5/16-18" Length Under Head: 3".
- Threads: Type F Thread Cutting (Coarse), Full Thread.
Check StockHARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit
- Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
- total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
- Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
- Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check StockRidgid 47760 Universal Die Head 1/4-3/8 NPT HS
- ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stockuxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit
- Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
- total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
- Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
- Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stockuxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel
- ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stockuxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel
- ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stockuxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel
- ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stockuxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel
- ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock1/8 HP Lathe BandSaw Machine Tool Circulation Coolant Pump, Immersion Length 180mm (7\), NPT 1/2\ Thread, Single 1 Phase 110/220V
- Dark thread cutting oil for lubricating and cooling dies and cutting machines during threading process.
- Mixture of sulfonated and chlorinated oils for high film strength.
- Dark formula for high-speed cutting machines.
- Anti-mist and non-staining for visibility.
Check Stockuxcell M6 X 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel
- ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stockuxcell 1/2-20 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel
- ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock