Best Thread Forming Screw
20Pcs Thread Inserts Protector,Male Female Reducing Nut Repairing Tools with Steel Wire for Improve Thread Strength,M12 x 1.75(2D)
- 【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
- 【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
- 【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
- 【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
- 【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..
Check StockHANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines
- You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
- Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
- The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
- Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
- Convenient to Use: the thread seal tapes are convenient to use.
- Just clean the 2 threaded connections that need to be sealed.
- Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
- And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
- Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
- If the thread sealing is not good, you can increase the thickness of the tape.
Check StockAutosampler Vials, Membrane Solutions 2ml HPLC Vials, 9-425 Lab Clear Vials with Write-on Spot and Graduations, 9mm Blue ABS Screw Caps & Septa for GC Sample Vials, 100 Pcs
- ...ting patch for sample identification and it with ISO 9001 certificated..
- PRESLIT PTFE/SILICONE SEPTA - 2ml Clear GC sample vials included blue ABS Screw Cap & Septa (Blue PTFE/White Silicone Liner). The preslit Septa can reduce flat pins curving and When collecting in large quantities, prevent negative pressure from forming in the sample bottle. It is highly recommended to use pre-opening septa for Shimadzu, Hitachi and other autosamplers with finer needle specifications.
- APPLICATION - Standard Autosampler Vial for HPLC & GC Chromatography, sample vials can be used for high performance liquid chromatography and gas chromatography for reliable analysis results.
Check StockPre-Drilling Screw MEETOOT 25pcs Brass Slotted Countersunk Head Screws Flat Self-Tapping Wood Bolt Woodworking Screws Furniture Hardware #2 x 1/2Inch M2 x 12mm Gold
- A wood screw is a thread forming screw with a large, pointed pitch. These brass screws are strong enough to drill holes on any wooden surface..
- Widely used in the installation, maintenance, fixing or decoration of various household and building supplies..
- These Phillips wood screws have a nice brass look and are used to directly secure two wooden surfaces..
Check Stock1/4\ -20 x 1-1/2\ Hanger Bolts, 8 pack
- Machine Screw Thread Length: 17mm / 0.67".
- Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
- Advantage: Good for wooden furniture. Wood screw thread on one end and a machine screw thread on the other end..
- Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check StockSeymour STR-662 1\ STA-LOK Repair Kit
- Easy to use,convenient to operate,saves effort and time in use..
- Using thread insert to convert mm---inch screw hole, it is convenient and fast..
- The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
- When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
- Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiator, etc.
- Parts thread hole repair, such as injection molding machine template thread hole repair.
- Imported equipment or machinery thread dam.
Check StockThe Hillman Group 491410 Hanger Bolt, 8-32 X 1-1/2-Inch , 8-Pack
- Machine Screw Thread Length: 22mm / 0.87".
- Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
- Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
- Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock50pcs Helical Threaded Inserts Stainless Steel Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 1.5D Length
- WIDELY USED:Stainless steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
- USED FOR PARTS:Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
- A CERTAIN ELASTICITY:Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resista.
- ADVANTAGE :It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance..
- EASY TO MAINTENANCE:Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
Check StockE-Z LOK 319-4 Insert 1/4-20 Int. Coarse Thd., 3/8-16 Ext. Thd., .375 Lg., Thinwall, Steel
- Important Parameters: Size: M6(inner diameter) x 1.0(installed pitch) x 3D(installed length=3*6mm=18mm), outer diameter: 7.6mm(Min.).
- 7.9mm(Max.), suitable drill bit diameter is 6.3mm..
- Function: Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
- Easy to Maintenance: Install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
- Excellent Performance: Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance..
- Usage Scenario: These threaded inserts are Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread. It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Check StockThread Repair Tool Stainless Steel 20Pcs Rethreading Tap Set for Female Thread Repairing Insert Sleeve
- The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
- When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
- Using thread insert to convert mm---inch screw hole, it is convenient and fast..
- Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc.
- Parts thread hole repair, such as injection molding machine template thread hole repair.
- Imported equipment or machinery thread dam.
- Easy to use,convenient to operate,saves effort and time in use..
Check Stock100pcs Stainless Steel SS304 Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 2D Length for Helical Repair
- Helicoil thread repair kit is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
- The steel thread inserts can effectively improve screw connection, greatly improving the reliability..
- M8 helicoil is suitable for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
- Helicoil m8x1.25 can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
- Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage..
Check StockThread Forming Tap Bttm 1/4-20 Uncoated
- Price For: Each Tap Dimension Type: Inch Tap Style: Thread Forming Number of Pieces: 1 Thread Direction: Right Hand Tap Finish: Uncoated Item: Tap Number of Flutes: 0 Standards: ANSI Tap Grouping: Tap List Number: 5502 Shank Dia.: 0.255" Thread Length: 5/8" Overall Length: 2-1/2" Tap Thread Size: 1/4"-20 Tap Thread Type: UNC.
- Tap Material: Vanadium High Speed Steel Tap Chamfer: Bottoming Pitch Diameter Limit: H4 Country of Origin (subject to change): United States.
Check Stock#4-40 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw
- Price For: Each System of Measurement: Inch Screw Industry Standards: ASME B18.3 Drive Type: Hex Socket Rockwell Hardness: B70 to B95 Basic Material: Stainless Steel Head Height: 0.112" Head Dia.: 0.183" Thread Dia.: #4 Drive Size: 3/32" Fastener Finish: Plain Vented Hole Size: 0.035" Screw Style: Socket Head Cap Screw Material Grade: 18-8.
- Thread Direction: Right Hand Temp. Range: 250 Degrees F Screw Head Type: Vented Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Dia./Thread Size: #4-40 Thread Style: Partially Threaded Thread Length: 3/4" Length: 1" Country of Origin (subject to change): Multiple.
Check Stock