Categories

Best Thread Repair Tapping Tool

XT AUTO 30pcs Stainless Steel M8 x 1.25mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 30pcs thread repair tool kit: The Kit Set not only includes the wire thread inserts, but the twist drill bits, wrench, thread taps, breaking pin tool which can solve your most repair needs..
  • High quality control: Made of precision high-speed steel for strength, wearproof and durability..
  • Easy to install: 1.Drilling - drill out the damaged threads using correctly sized drill bit provided 2.Tapping - Tap re-drilled hole using tap supplied (Cutting oil recommend) 3.Install the insert - place insert on installation tool and position the adjustable ring clockwise.4.Tang removal - remove the tang use the break tool..
  • Wide application: Great choice for restoring damaged threads in steel, iron, aluminum and anywhere which metal threads become stripped, crossed or damaged..
Check Stock

Delisert Self Tapping Threaded Insert Type 307 Carbon Steel m5x0.8x7mm 100PCS

  • ۞۞۞【Rigorous Testing】The self tapping threaded inserts have undergone quality assurance testing to ensure dependable and reliable performance.
  • ۞۞۞【Loosening Avoided】With certain elasticity and even load, the slotted thread inserts are resistant to vibration to avoid loosening and the strength and stability of screws connection are greatly improved..
  • ۞۞۞【Good Quality Long Service Life】The tapping thread inserts are made of high quality stainless steel with high hardness and low abrasion that ensures long service life..
  • ۞۞۞【Easy to Use】Easy and quick to install with only one assembly tool..
  • ۞۞۞【Good Replacement for the Damaged Thread】It can also repair the damaged thread by installing into thread hole..
Check Stock

50PCS Threaded Inserts,Self-Tapping Thread Insert,M3-M12 Thread Reinforce Repair Tool Self Tapping Thread Inserts Set for Plastic Copper

  • SUITABLE: The self-tapping thread insert is a kind of fastener that strengthens the thread, which can form a high-strength inner thread hole when embedded in a soft material such as plastic, copper. It can also be used to repair the damaged inner thread..
  • MATERIAL: Made of high quality stainless steel, it is of high hardness and low abrasion,Greatly improve strength and stability of screws connection.
  • ADVANTAGE: With certain elasticity and even load, it is resistant to vibration to avoid loosening,Long service life - it can be used repeatedly..
  • QUICK TO INSTALL: Easy and quick to install with only one assembly tool..
  • INSTALLATION METHOD: The self-tapping screw sleeve installation does not need to be threaded in advance. It can be directly screwed into the specific hole reserved for the base material with the installation tool. The same screw as the original can also be used for the female thread of the broken tooth. It is economical and beautiful. For new products It can also increase the thread strength.
Check Stock

Autocraft - Spark Plug Thread Repair Kit | Fits M14 X 1.25mm Sizes | Repair Damaged Spark Plug Hole Threads | Rethreader Set with Thread Inserts

  • REPAIR ANY DAMAGED SPARK PLUG HOLES: The thread repair tool kit easily repairs the 14mm spark plug threaded hole port. It can be used for creating stronger internal threads in all metals, composites, polymers, and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • WIDE APPLICATION: The kit is widely used in the automotive industry, rail vehicle industry, shipbuilding industry, household appliances, construction machinery, business machinery, electronic products, engineering plastics, advanced furniture, aluminum die-casting and other industries..
  • MATERIAL USED: The kit is made of hardened carbon steel for high strength and long-lasting durability. Our carbon steel spark plug thread repair kit uses strict quality control standards, improved design, advanced production technology, and more durable products..
  • PACKAGE CONTENTS: The Rethread tool kit includes a tapping reamer and 4 different depths of inserts to repair deep-rooted plugs..
  • SATISFACTION GUARANTEED: We at Tool Liquidators solely believe in 100% customer satisfaction. If in any case, you are unhappy with your purchase, then please let us know, we will do anything required to make you a happy customer..
Check Stock

Yunir Self-Tapping Thread 50 Pieces Stainless Steel Internal Thread Slotted Screw Metal Threaded Insert Set M3 M4 M5 M6 M6.5 M8 M10 M12 M14 M16

  • ۞۞۞【Rigorous Testing】The self tapping threaded inserts have undergone quality assurance testing to ensure dependable and reliable performance.
  • ۞۞۞【Loosening Avoided】With certain elasticity and even load, the slotted thread inserts are resistant to vibration to avoid loosening and the strength and stability of screws connection are greatly improved..
  • ۞۞۞【Good Quality Long Service Life】The tapping thread inserts are made of high quality stainless steel with high hardness and low abrasion that ensures long service life..
  • ۞۞۞【Easy to Use】Easy and quick to install with only one assembly tool..
  • ۞۞۞【Good Replacement for the Damaged Thread】It can also repair the damaged thread by installing into thread hole..
Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

Quick Thread Insert, 50Pcs Brass Tone Self Tapping Thread Slotted Inserts Combination Set Repair Thread Tool with a Storage Case

  • These thread inserts have self-tapping ability so that the base metal does not need to be tapped beforehand..
  • Self-tapping thread inserts have a maintenance effect on damaged threads..
  • Thread repair allows to continue using the same screws..
  • Self-tapping thread inserts have strong resistance to vibration so as to prevent loosening..
  • Simpler, more convenient and faster than ordinary steel wire thread inserts..
Check Stock

50Pcs Stainless Steel Inner Thread Self Tapping Thread Inserts Set Thread Reinforce Repair Tool M3-M12 with a Storage Case

  • Threaded inserts are made of high quality stainless steel ,anti-corrosion and rust, good toughness, high hardness and low abrasion..
  • With certain elasticity and even load，metric thread inserts are resistant to vibration to avoid loosening..
  • Tapping Inserts can be used repeatedly, can also repair the damaged thread by installing into thread hole..
  • These wire threaded inserts are easy and quick to install,only need one assembly tool..
  • Thread reducer can greatly improve the strength and stability of screw connections..
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • ...erted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell Thread Milling Threading Tap 7/16\-20 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: M20 x 2.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 3/8\-24 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Tap Size: M10 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock