Categories

Best Thread Sealant Kit

DAP Extreme Stretch Kit - 10.1 oz White Premium Crackproof Elastomeric Sealant. Stretches Over 600%, Seals Gaps up to 3\ Wide. Includes 12 Extreme Stretch Tubes and Applicator Gun

  • ALL-PURPOSE SEALANT! Looking for a high-quality sealant that won't let you down? Look no further than DAP Extreme Stretch! This waterproof and weatherproof sealant stretches over 600% and seals joints up to 3" wide. This low odor urethane acrylic sealant can be used for indoor and outdoor projects..
  • WIDE RANGE OF USES! DAP Extreme Stretch is ideal for windows, doors, cornices, chair rails, baseboards, trim, siding, vents, soffits, eaves, countertops, and sinks. Paint can be applied over it after at least two hours of drying..
  • AWESOME VALUE KIT! Our AWF PRO DAP Extreme Stretch Kit comes with everything you will need. The kit includes: White Extreme Stretch 10.1oz Tubes (12) and AWF PRO Heavy Duty Caulk Gun (1)..
  • SIMPLE TO USE! 1. Surface preparation. It is imperative that the project surface is clean, dry and clear of old sealant. Extreme Stretch will not adhere to old sealant. 2. Cut the nozzle at a 45° angle to desired bead size. 3. Load into caulk gun. 4. Fill gap with sealant, pushing the bead forward. 5. Tool within 15 minutes. FOR EXTRA WIDE GAPS: Ensure to use backer rod on any joint sizes that are deeper or wider than ½”..
  • EASY CLEAN UP! Clean up with a damp cloth or sponge before it skins over. Cured sealant must be cut or scraped away..
Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

Atlantic Water Gardens Basin Kit with Pump for Formal Waterfall Spillways for 36-inch Spillways

  • Basin features built-in plumbing channels and pre-filtered pump chamber.
  • Includes Complete Installation Kit including pump discharge, flow valve, spray glue and thread sealant so there's no need to run to the hardware store.
  • Compatible with all Atlantic Formal Spillways.
  • Can be installed above or below grade for a variety of different installations.
  • Includes TidalWave2 energy efficient pump with 32' power cord.
Check Stock

WYNNsky Air Tool Coupler and Plug Kit, 1/4 Inch NPT Fittings Industrial Type, 7 Piece w/Storage Case

  • I/M Type air coupler and plugs with max pressure of 300psi.
  • All the outside thread with sealant, better sealing.
  • Zinc plated steel coupler features high corrosion resistance and long life.
  • Air fitting kit for air tools, air compressor, air nailer, air blow gun, pressure washer, air hose.
Check Stock

WYNNsky Air Coupler and Plug Kit, 1/4 Inch NPT Air Fittings Industrial Type, 7 Piece Air Compressor Accessories Kit

  • I/M Type air coupler and plugs with max pressure of 300psi.
  • All the outside thread with sealant, better sealing.
  • Zinc plated steel coupler features high corrosion resistance and long life.
  • Air fitting kit for air tools, air compressor, air nailer, air blow gun, pressure washer, air hose.
Check Stock

Craftsman 20-pc Air Accessory Kit (CMXZTSG1139NB)

  • Starter Kit: includes essential accessories needed to equip a new air compressor.
  • Applications: Attachments included for inflating tires, sport balls and air mattresses.
  • connecting compressor to air hoses and air tools.
  • Recoil hose connects to all included accessories with included quick-connect fittings.
  • Specifications: standard 1/4-inch NPT male or female threads.
  • Includes: recoil air hose, 2 - sport ball inflation needles, blow gun, safety nozzle, rubber nozzle, tapered nozzle, blow gun nozzle adapter, 2 - 1/4-in female brass quick-connect couplers, 3 - male steel quick-connect plugs, 2 - female steel quick-connect plugs, dual-chuck tire inflator, 1/4-in male adapter, 1/4-in female adapter, tire pressure gauge, and thread sealant tape.
Check Stock

Certified Appliance Accessories CERT77300 Universal Gas Line Connector Kit, 4 Feet, gray

  • 4ft heavy-duty stainless steel connector with 5/8” MIP (Male Iron Pipe) x 5/8” MIP on each end.
  • Two 5/8" OD (Outer Diameter) flare x 1/2" MIP tapped with 3/8" FIP (Female Iron Pipe) adapters.
  • 5/8" OD flare x 3/4" MIP tapped with 1/2" FIP adapter.
  • Supplies up to 106,000 BTU (British Thermal Unit)/hour.
  • Includes one 4-Feet heavy-duty stainless steel connector, one 5/8-Inch od flare x 1/2-Inch m.i.p. (tapped with 3/8-Inch f.i.p.) adapter.
Check Stock

Poly-Temp 36536 Anti-Seize Ceramic Filled PTFE Thread Seal Tape, 600\ Length x 1/2\ Width x 3.5 Mil Thickness, Cream

  • The Combination of PTFE along with Copper Powders provide the ultimate protection from oxidative chemicals and protects against rust and corrosion, Ideal for all tapper thread connections.
  • PTFE's high lubricity makes for easy assembly, only three wraps needed for most applications, excellent pipe thread sealant up to 550F.
  • Copper filler can withstand temperatures up to 1800F for anti-seize applications, pressures up to 10,000psi.
  • Never dries out, unlimited shelf life, Extremely versatile lubricant and sealant..
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...etween pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Check Stock

Porter Cable FC350A/FR350A/FM350A OVERHAUL Kit # 910450

  • Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
  • The 10” braided steel hose is flexible which prevents breaking and kinks..
  • Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
  • Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
  • Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.
Check Stock

Cramer 40407US Silicone Profiling Kit7 – professional Caulking Tool Kit with Sealant Finishing Tools and Caulk Removal Tools – easy silicone caulking with guides

  • The Original: CRAMER Profiling Tools – made in Germany. Professional Tool Kit for removal and renewing silicone joints. Kit contains 5 sealant finishing tools, 2 guides and a caulk removal tool with 3 interchangeable metal blades. Everything in a practical storage box..
  • Removal of old sealant: Old silicone joints can be removed with the CRAMER silicone removal tool and the saw blade, for residues use the scraping blade (incl. replacement blade)..
  • Simple silicone caulking with guides: 5 sealant smoother with 16 needed profile variants and 2 guides. The cleverly attached guides help bridging intersections and prevent any subsidence when working at these intersection grout lines. All sealant tools have tool edges at 90° angle: The only way to ensure that the corners are also properly grouted!.
  • Processing without soapy water: The caulking is carried out much easier in small sections – additionally, blemishes can be simply reworked without removing the existing joint..
  • With this Kit the most complex silicone profiling becomes child's play. Delivered in a practical plastic box – all tools stored in one place, so that nothing gets lost!.
Check Stock

Green Water Tracing & Leak Detection Flourescent Dye - 1 Gallon

  • Can't Find a Leak in your Spa or Hot tub? AquaDoc's advanced spa fix a leak sealer helps find and stop leaks - even if you can't find the water leak....
  • Stop leaks within 24 Hours - With our Hot Tub Leak sealant, you can fix a leak for hottubs and spas quickly. Our spa leak sealer & hot tub leak seal....
  • Hot Tub Crack Repair Kit - Repair spa leaks without having to drain your water. If you own a hot tub stop leak sealing by draining water first. With....
  • The only Fix a Leak Seal Kit you Need - With AquaDoc's hot tub sealant, there's no need for spa sealant tools or extra hot tub sealing kits. Our hot....
Check Stock

TOMEX Thread Seal Tapes,PTFE Pipe Sealant Tape,Teflon Thread Tape 1/2x520 Inch, Industrial Thread Sealants for Leak Water, Plumbers, Plumbing, Air Head, Thread Pipe(10 Rolls,White)

  • Package Includes: These tapes measuring 1/2 x 520 inches in size, totally 10 rolls pipe sealant tape, enough quantity for your different needs and also can be applied for a long time..
  • Good Quality: TOMEX Thread sealant tape is made of teflon with good density,4 times heavier than standard tapes,is suitable for most kinds of soft water pipes, Teflon tapes will not harden or crack anytime.
  • They have the good characteristics of corrosion resistance, anti-aging,helps prevent leaks on pipes and plumbing..
  • Widely apply: thread sealant tape is suitable for most kinds of soft water pipes, it is designed for home and piping applications.Working for both air and water , plastic and metal pipe fittings.good for gas, drinking water pipes and garden hose faucets ..
  • Simple & Efficient to Use: simply wrap the tape around the threaded male end of the pipe or connector and screw it in.
  • Less stickiness on the fingers and easy to remove.
  • Standard Grade: Standard quality for home, commercial and industrial piping applications. Fit all types of pipe threads for hundreds of applications..
Check Stock