Categories

Best Thread Tap Kit

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

4 1/4-20 Thinwall Thread Repair Inserts

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Powercoil 3534-3/4K UNF 3/4-16 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing, tap, installation tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Powercoil 3532-10GK UNC 10-24 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Lead Wire Combination Patch Plug 2\ Patch 24/BX Xtra Seal 13-673 5/16

  • Thread repair kit containing, tap, installation tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Powercoil 3534-7/16K UNF 7/16-20 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Powercoil 3532-7/16K UNC 7/16-14 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Powercoil 3521-16.00K M16-1.5 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

R134A Self-Sealing Can Tap Valve Refrigerant Dispenser Tool Bottle Opener, with 1/2" Female Right Hand Thread, 1/4inch SAE Male, T handle for easy fingertip control, for R134A Automotive

  • [R134a Refrigerant Packing] Includes an R134A Can Tap, Thread 1/2In RH internal thread with 1/4In SAE male, connects R134A self-sealing designed cans. Perfect for your car AC recharge tool kit..
  • [Can Tap Compatibility] This R134A self-sealing, T type Can Tap Valve Thread is 1/2In Female Right Hand Thread, 1/4In SAE Male, Can work only with self-sealing 1/2In right-hand thread for use with most R134A self-sealing designed cans. Can not be used on puncture style cans..
  • [134a Can Tap Design] This R134A car air conditioning adapter is a "T" handle for easy fingertip control, Easy to open the R134a can with a valve to turn off/on..
  • [R134a Refrigerant Can Quality] The R134A can adapter is made of aluminum alloy with heavy-duty construction, with a gasket protected to prevent leaks for durable use..
  • [134a Refrigerant Automotive Service Gurantee] This R134A Can Tap come complete with a 1-Year warranty. Our department Usually does a 100% quality inspection on the R134A Can Tap before delivery. We will refund if the R134A Can Tap part is defective. If you have any problems, feel free to contact us..
Check Stock

Neiko 00916A 45 Piece SAE Tap & Die Set, SAE Tap and Die Set, Tap Set, Rethreading Kit, Pro-Grade Large Tap and Die Set, Titanium Threading Tools, Thread Chaser Set, Tap & Die Set Standard

  • HEAVY DUTY TAP & DIE SET: Titanium cutting edges hold sharpness up to 20x longer than steel, making this a perfect SAE tap and die set for any project, big or small..
  • VERSITILE: Create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper, and stainless steel with this tap and die kit..
  • DURABLE STORAGE CASE: This large tap and die set standard is fully equipped in a heavy-duty molded case for easy identification, storage, and portability for all your jobs on the go..
  • PREMIUM MATERIAL: Our SAE thread chaser set is made of a professional grade steel, highly durable and built to last for multiple uses. This tap set is perfect car repairs, DIY projects, and much more..
  • COMPLETE SET INCLUDE: This rethreading kit comes with the most popular SAE taps & dies. T-handle tap wrenches, adjustable die wrench, screwdriver, and thread pitch gauge..
Check Stock

Aceteel 1/2\-28 UNEF HSS Tap And Die Set, 1/2 x 28 UNEF Machine Thread Tap And Round Thread Die Right Hand

  • Durable material: the tap and die set is made of alloy steel and metal, rugged and durable, can be applied for a long time.
  • Equipped with storage box, tap die tool set is easy to store and organize and use..
  • Practical repair tools: the thread tap set can help you to repair partially damaged nuts, bolts and threads.
  • When your worn-out screws are rusty and can no longer match your machine, this set can help you easily eliminate the flaws on the threads.
  • Fine craftsmanship: the polished thread tap kit is made with advanced technology and craftsmanship, which can fit nicely with screws.
  • In addition, after being treated with a corrosion-resistant satin finish, the thread cutting friction is smaller and the surface becomes stainless steel, making it to be more bright and textured.
  • Size information: the package comes with 9 x metric taps and 9 x metric dies in different specifications, namely, M3 (0.5 mm)/ M4 (0.7 mm)/ M5 (0.8 mm)/ M6 (1 mm)/ M7 (1 mm)/ M8 (1.25 mm)/ M9 (1.25 mm)/ M10 (1.5 mm)/ M12 (1.75 mm).
  • Adjustable tap wrench handle measures about 19.5 cm/ 7-11/16 inch long, suitable for M3 to M12 (1/16 to 1/2 inch), and the die wrench handle is about 20 cm/ 7-7/8 inch long, suitable for M25 (1 inch).
  • Suitable for beginners and skilled people: this tooth ....
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock