Categories

Best Thread cutting Tapping Screws

M3 Flat Head Wood Screws Assortment Fasteners Kit 420pcs,Phillips Drive Countersunk Head Self-Tapping Screws,Yellow Zinc Plated Finish,Contains 20pcs M6 Screw Anchors

  • 【HIGH QUALITY MATERIAL】:Made of Carbon Steel,resistant to rust,good corrosion resistance in bad environment,commonly have a sharp point that helps penetrate the material..
  • 【MATERIAL & WORKMANSHIP】:Adopting high-precise cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【PACKAGE INCLUDES】:8 Kinds Phillips Flat Head Self-Tapping Screws. Contains M3 x 6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 420 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you..
  • 【WIDE APPLICATION】:Self tapping wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
Check Stock

LIONMAX #8 x 1-5/8" Exterior Wood Screws, 800 PCS Star Drive Deck Screws, Tan Coated for Outdoor Use, Coarse Threads, No Stripping, Anti-Rust, T-25 Drive Bit Included

  • 【Superior Exterior Coating】: Tan coated wood screws through 1000 hours salt spray test against erosion and rust. The screws can be exposed to the sun, humidity, rain and snow condition for a long time..
  • 【Star Drive】: Star drive deck screws with 6 contact points to prevent stripping, saving drive torque and further fasten screws into wood construction, eliminate loose or camout..
  • 【Aggressive Thread + Self-tapping Point】: No pre-drilling, wood screws with self-tapping point and coarse thread increase tapping power, ideal exterior screws for treated deck, fence and outdoor wood projects..
  • 【Finger Protection Shank】: Smooth screw shank protect your fingers from sharp threads, convenient for picking/holding screws up..
  • 【Package】: #8 x 1-5/8 Inch Deck Screws, 800 Pieces, T-25 Star Drive Screws Bit Included..
Check Stock

Spax T-Star Plus, Plate Head Wood Screw, Partially Threaded, 4Cut mm A3J, 251010801205

  • Usage: for fixing rafters or roof insulation. Exclusive WIROX coating from SPAX.
  • Better traction during screwing thanks to washer head. Optimal power transmission and better fit on SPAX T-STAR plus T40 with guide pin, even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 50 wood screws, T-STAR plus, Washer head, Full thread, 4CUT point, WIROX coating, Thread diameter (脴d1)= 8mm x Total Length (Ls) = 120mm, Full Thread Length (LgV) = 80mm, Head diameter (脴dk) = 20mm, Bit not included.
Check Stock

Spax T-STAR Plus, 4Cut Panhead – Universal Screw, fully threaded, Stainless Steel A2, 1.4567 – 0207000350203, 0207000400303

  • Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
  • Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Full Thread Length (LgV) = 27mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

Spax T-STAR Plus, 4Cut Panhead – Universal Screw, fully threaded, Stainless Steel A2, 1.4567 – 0207000350203, 0207000400203

  • Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
  • Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 20mm, Full Thread Length (LgV) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

Spax T-Star Plus, Plate Head Wood Screw, Partially Threaded, 4Cut mm A3J, 251010803405

  • Usage: for fixing rafters or roof insulation. Exclusive WIROX coating from SPAX.
  • Better traction during screwing thanks to washer head. Optimal power transmission and better fit on SPAX T-STAR plus T40 with guide pin, even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 50 wood screws, T-STAR plus, Washer head, Partial thread, 4CUT point, WIROX coating, Thread diameter (Ød1) = 8mm x Total Length (Ls) = 340mm, Length of partial thread (LgT) = 80mm, Head diameter (Ødk) = 20mm, Bit not included.
Check Stock

LIONMAX Wood Screws Assortment Kits 4Size 420PCS Deck Screws 1-1/4 1-1/2 2 2-1/2 Star Drive Screws with Coarse Thread Tan Coated for Exterior Use Self-Tapping Drive Bit Included

  • 【Superior Exterior Coating】: Tan exterior wood screws through 1000 hours salt spray test against erosion and rust. The screws can be exposed to the sun, humidity, rain and snow condition for a long time..
  • 【Star Drive】: Star drive deck screws have 6 contact points with bit to prevent stripping, saving drive torque and further fasten screws into wood construction, eliminate loose or camout..
  • 【Aggressive Thread + Self-tapping Point】: No pre-drilling, wood screws with self-tapping tip and coarse thread increase tapping power, ideal exterior screws for treated deck, fence and outdoor wood projects..
  • 【Finger Protection Shank】: Smooth screw shank protect your fingers from sharp threads, convenient for picking/holding screws up..
  • 【Package】: Deck Screws Assortment Kits 420PCS, T-25 Star Drive Bit Included..
Check Stock

Quick Thread Insert, 50Pcs Brass Tone Self Tapping Thread Slotted Inserts Combination Set Repair Thread Tool with a Storage Case

  • These thread inserts have self-tapping ability so that the base metal does not need to be tapped beforehand..
  • Self-tapping thread inserts have a maintenance effect on damaged threads..
  • Thread repair allows to continue using the same screws..
  • Self-tapping thread inserts have strong resistance to vibration so as to prevent loosening..
  • Simpler, more convenient and faster than ordinary steel wire thread inserts..
Check Stock

Hilitchi 240 Pcs #8 304 Stainless Steel Phillips Truss Head Self Tapping Sheet Metal Screws Assortment Kit Set

  • ♛ Made of 304 Stainless Steel, stainless steel is superior to regular steel and provides excellent rust resistance in water applications, Suitable for indoor and outdoor use.
  • ♛ Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material..
  • ♛ Package Quantity: 240-Piece. All of screws will be packed in a sturdy plastic box, can be use for a storage box.
Check Stock

Self Tapping Screw Assortment Stainless Screws Self Drilling, 600pcs M3/M4/M5/M6 304 Sheet Metal Screws Pen Head Small Wood Screws Furniture Screws Set

  • This stainless screws self tapping are widely used on wood, sheet metal, drywall, plasterboard, plastic and so on. The self tapping screw assortment are perfect for your home improvement, carpentry work , or industrial workplace..
  • This 600pcs wood screw assortment contains 16 commonly used stainless steel self tapping screws, 310 pan head self drilling screws(M3/M4/M5 x12mm/20mm/25mm/40mm) & 290 countersunk head self tapping screws(M3/M4/M5/M6 x /20mm/25mm/40mm/50mm).
  • These 304 stainless steel self tapping screws are known for its dependable and rigid strength as well as its corrosion resistant quality. The screw thread is sharp and sturdy, Cross head keep its original form. Durability withstanding up to 550kgf..
  • There are 600pcs sheet metal screws self tapping set are perfect for home standby. The trim screw assortment will be be classified in a convenience store case which can also be used for a storage box.
  • We are a professional manufacturer of stainless steel metal screws, and have been in this business for 20 years. We offer 100% customer satisfaction guarantee for stainless steel screws. Any question please do free to contact us..
Check Stock

400 PCS 410 Stainless Steel Self Tapping Screws for Metal,Length 1/2" to 2" Hex Head Self Drilling Screws, Rust Proof Wood Screws Assortment Kit #8#10#12 TEK Screws,White

  • PRACTICAL MULTIPLE SIZES：Self tapping screws for metal contain # 8 x 1/2 '', # 8 x 3/4 '', # 8 x 1 '', # 10 x 1/2 '', # 10 x 3/4 '', # 10 x 1 '', 12 x 3-4 '', # 12 x 1-1/2 '', # 12 x 2 '', totally 9 practical sizes. ALl sizes of Self tapping Screws are carefully selected to meet your different need. This screws assortment is consist of 400 pieces Tek Self Tapping Screw of different types, like #8, #10, #12 and three useful length..
  • DURABLE STORAGE BOX： All these self drilling screws are carfully kept and classified in one transparent, durable, solid and high quality tool box.This wood screws assortment kit is clearly attached the corresponding dimension table to facilitate the identification of metal screws with corresponding dimensions and put them back..
  • HIGH QUALITY WORKMANSHIP：This Wall plate screws adopt high-precision cutting technology, and the thread is very sharp, firm, clear, and would not be easily peeled off by the screwdriver. These Hex Head Self Drilling Screws profile provide a direct driving mode, which can easily penetrate wood and plastic without pre-dri....
Check Stock

VIGRUE 510Pcs Stainless Steel Wood Screws Assortment Kit 4#6#8#10#12 Phillips Pan Head Sheet Metal Screws Self Tapping Screws Set,Length 3/8 to 1-1/2

  • Material: 304 Stainless Steel (18-8). For interior/exterior use..
  • ✔Package includes: 510pcs and 18 sizes stainless steel wood screws.
  • Various thread size and length in one set can be applied to wood, metal, plastic, aluminum projects. Save time to pick one by one..
  • #12x3/4",1-1/2" Phillips pan head wood screws..
  • ✔These pan head sheet metal screws with extra sharp point, accelerates screw starts during assembly. Deep and clear thread indentations are specifically designed to resist back-out even after prolonged vibration. Ideal for outdoor/ndoor woodworking..
  • ✔304 Stainless steel ensures these pan head self tapping screws effectively prevent corrosion and avoid break off..
Check Stock

Spax – Universal Screw 3/blank Galvanised Partially Threaded, Countersunk T-Star plus 4Cut, A2J – 0191010350303, 191010400303

  • Usage: Universal indoor or outdoor without direct exposure to weather elements. Exclusive WIROX coating from SPAX聽: Corrosion resistance 20 times stronger than standard white galvanized coating.
  • MULTI head: Easy penetration and simplified screwing. Mills in wood and stops on metal. Optimal power transmission and better fit on the T20 bit, even with overhead work, thanks to the T-STAR plus guide pin.
  • Power and battery saving: no need for pre-drilling (depends on wood). Easy screwing. Reduction of wood splitting with four-sided 4CUT tip. Typical SPAX corrugated profile for easier separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Countersunk head, Partial thread, 4CUT point, WIROX coating, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Length of partial thread (LgT) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock