Categories

Best Threaded Anchor Adhesive

PC Products PC-Concrete Epoxy Adhesive Paste for Anchoring and Crack Repair, Two-Part 102 oz in Two Pails, Gray 71021

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

PC Products 70086 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 1.4 oz in Applicator Syringe, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

LORADAR Laptop Cable Lock Hardware Security Cable Lock Anti Theft 3 Keys 6.7Ft Compatible for Tablets Laptops, iMac,TV Mac Mini& Other Devices Longer Cable & Stronger Lock Head (Keyed Different)

  • *【For The Laptops】It is suitable for all laptops with kensington3*7mm keyhole. Those without kensington3*7 keyhole and wedge-shaped keyhole need to be used with the adhesive anchor plate. If you mind using the adhesive anchor plate, the lock will not be suitable for your computer..
  • *【FIT FOR ALL THE TABLETS】 : With a anchor plate hardware cable lock fit for Mac Book and all the Tablets, Smart Phones, such as Apple iPad, Microsoft Surface, Kindle, iPhone, Samsung, Android Tablets and phones etc.The lock body and key have a traceable number, you don’t have to worry about losing the key..
  • *【Strong Steel Wire Rope】The length of the cable is 2M/6.7f, Is made of 7 * 19 strands of steel wire, made of hardened steel wire instead of iron wire. The diameter of the steel core is 3.0mm, thicker than similar products on the market,and the diameter after encapsulation is 5.0mm. The cable has anti-cutting capability. The steel cable joint can withstand a pulling force of up to 1800N, while the steel cable ring can withstand a pulling force of 1200N without breaking..
  • *【HOW TO USE】For notebooks, monitors, and desktop mainframes with 3*7mm security keyholes, you can insert the lock head and use it directly without using the anchor plate. For laptops, t....
Check Stock

Better Boat 4 Foot 1/4\ Stainless Steel Anchor Chain and Double Shackle Link Ends Marine Grade

  • ...UM STAINLESS STEEL: Our Marine Grade 4 ft stainless anchor line is made from 1/4" 316 Stainless Steel along with 2 bow shackles also constructed from 316 stainless steel. Unlike the galvanized chain alternatives, these boat anchor chain options are designed to last and avoid corrosion..
  • SAFE AND RELIABLE: Our double threaded bow shackle pins prevent the screw from coming loose and falling from the anchor chain. The chain is abrasion resistant and weighted to properly keep your anchor shank parallel with the sea floor. The chain offers a 5110lbs break load while the shackles offer a break load of 5510 lbs..
  • COMPATIBILITY AND FLEXIBILITY: Our large 5/16" stainless bow shackles are designed to work with almost all anchor rope. Works great with our separately sold anchor lines and their pre spliced stainless thimble. The screw pin anchor shackles with chain will work with traditional fluke anchors, box anchor, spade anchor and others..
  • EASY SEAMLESS UPGRADE: Whether your upgrading your boat anchors and looking for a more reliable anchor chain, or outfitting a new boat, this is your solution. Not all chains are created equally, and we completely stand behind our stainless chains to provide superior performance. This allows you to worry about the anchor less,....
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Boernfnso 14G Dermal Piercing Jewelry Dermal Anchor Tops and Base Titanium Microdermals Piercing for Women Men Jeweled CZ Moon Deamal Piercings Jewelry 2mm 3mm 4mm

  • ①、Order Includes:36PCS 14g dermal piercing jewelry,2mm/3mm/4mm Dermal Anchor Tops,Moon, Peach Heart ,Diamonds, Five-Pointed Star, Round Ball, Flat Ball CZ Dermal Anchor Top..
  • ②、Wearable on:Dermal Piercing Dermal Tops Jewelry Dermal Anchor Top Dermal Anchor Jewelry Dermal Anchor Base Dermal Anchor Kit Dermal Anchor Set Dermal Piercing Kit Base Titanium Microdermals Piercing For Women Men.
  • ③、Size:Bar Diameter: 1.2mm(16g) Internally Threaded for 14 Gauge Anchors, Bar Length: 2mm, Top Size: 2mm 3mm 4mm, Base Length is 6.5mm, Base Width is 2.5mm. It's the best gift for for Birthday, Christmas Day, Anniversary Day, Valentine's Day and more..
  • ④ Material quality: surgical grade 316L stainless steel, non elastic, non fading, high quality Cubic Zircon, diamond..
  • ⑤、After sales service: 90 days worry free return and exchange, 180 days after sales service, 24 hours reply to your questions, give you the best shopping experience..
Check Stock

Sweepa - Fixed Broom Handle (Handle Only)

  • Standard threaded handles are made of lacquered hardwood for consistent dependability.
  • Metal thread handles have a heavy duty tip to provide extra strength.
  • Lumathread handles have 3-1/4-inches metal tips. Tapered handles have precision cut tapered end.
  • Measures 1-1/8-inches diameter by 60-inches length.
Check Stock

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (30') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

1SHOT Steel Stud Anchor 250 Pack

  • Thread Dia.: M12, Pitch:1.75mm, Total Length: 250mm / 9.84"..
  • Material: 304 Stainless steel, anti-rust, anti-corrosion, durable to use..
  • Advantage: Designed for assembly fastening, screw into threaded nuts or tapped holes..
  • Application: Suitable for anchor bolts, clamps, hangers and U-bolts and many more projects..
  • Package: Includes 2 pack M12 x 250mm Fully Threaded Rod. Any questions feel free to contact us..
Check Stock

Murtenze 2Pcs M5 x 250mm Fully Threaded Rod, 304 Stainless Steel Long Threaded Screw Right Hand Threads (Silver)

  • Package & Size - You will get 2 pcs 5mm x 250mm threaded rods worth of.
  • Total length: 251 mm/9.84 inches. Fully threaded rods and studs can be drilled, cut, heated and formed.
  • Durable Material - These m5 threaded rods are made of 304 stainless steel, with excellent corrosion resistance and rust resistance, and long service life.
  • How to Use - Our stainless steel threaded rods can be used for assembly and fastening, screwed into nuts or threaded holes, and cut to the length you want.
  • Widely Application - These threaded rods and studs m5 are suitable for various applications, such as anchor bolts, fixtures, hangers, U-bolts, welding protrusions, and even model building, etc..
  • Satisfied Service - 100% Satisfaction If there is any quality problem with our product, we will reply within 24 hours. And you can return the product and get a refund within 30 days from receiving. You have no risk of trying, please order with confidence and no hesitate..
Check Stock