Best Threaded Cable Compression Fitting
Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06
- 90-degree elbow for connecting two tubes at an angle.
- Female compression tube fitting for connecting to male threaded pipes.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Operating temperature range of -65 to 250 degrees F.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check StockPysrych 304 Stainless Steel Compression Tube Fitting 90 Degree Elbow 1/4 OD x 1/4 OD Pack of 2
- 90-degree elbow for connecting tubing to threaded pipe at an angle..
- Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
- 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation..
- Temperature Range: -50-450℃ / -58℉ -842℉..
Check Stock
Nextech DFS1000 (1000N/220lbf/100kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures
- Made in Thailand. Power adapter/charger input 100-240 volts AC..
- Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode..
- 500 reading can be recorded on internal memory for later viewing or download. Latest version PC Software 'NexGraph' Plot Time vs Force..
- M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32"(M5) & 4x M3 mountable threaded holes..
- Re-calibration feature with password protection Load cell condition and overload counter's display page.
- Power by internal rechargeable NiMH battery pack or directly from wall plug charger..
- Complete set include plastic case, 100-240 volts US Plug charger, USB cable, printed manual, 3x stainless steel accessories (sharp point, hook & compression plate)..
- Factory's calibration certificate included.
Check Stock
Nextech DFS100 (100N/22lbf/10kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures
- Made in Thailand. Power adapter/charger input 100-240 volts AC..
- Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode..
- 500 reading can be recorded on internal memory for later viewing or download. Latest version PC Software 'NexGraph' Plot Time vs Force..
- M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32"(M5) & 4x M3 mountable threaded holes..
- Re-calibration feature with password protection Load cell condition and overload counter's display page.
- Power by internal rechargeable NiMH battery pack or directly from wall plug charger..
- Complete set include plastic case, 100-240 volts US Plug charger, USB cable, printed manual, 3x stainless steel accessories (sharp point, hook & compression plate)..
- Factory's calibration certificate included.
Check StockNextech DFS200 (200N/44lbf/20kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures
- Made in Thailand. Power adapter/charger input 100-240 volts AC..
- Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode..
- 500 reading can be recorded on internal memory for later viewing or download. Latest version PC Software 'NexGraph' Plot Time vs Force..
- M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32"(M5) & 4x M3 mountable threaded holes..
- Re-calibration feature with password protection Load cell condition and overload counter's display page.
- Power by internal rechargeable NiMH battery pack or directly from wall plug charger..
- Complete set include plastic case, 100-240 volts US Plug charger, USB cable, printed manual, 3x stainless steel accessories (sharp point, hook & compression plate)..
- Factory's calibration certificate included.
Check StockHiija RG6 Compression Tool Coax Cable Crimper Kit RG6 RG11 RG59 F81 with 20PCS F Compression Connectors - BlueYellow
- Coax Cable Crimper: Made of heavy duty materials, more solid and sturdy.
- Perfect for Satellite TV, CATV, Home Theater, and Security.
- Advanced Rotating Head: Quickly and easily alternates for compression of RG-6, RG-11, RG-7, RG-58, RG-59 connectors in one tool.
- Adjustable Compression Tool: Ensure every fitting is installed perfectly with the adjustable compression feature.
- Compression Distance: 15.5mm~22.6mm for RG58/59/6, 30.5mm~37.3mm for RG11/7.
- Warranty & Support - Worry-Free 18-Month Warranty and Toll-Free Tech Support, and friendly customer service.
Check Stock304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)
- STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
- SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
- LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
- SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
- APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..
Check Stock
40 Pieces T316 Beveled Washer Angle Washer Stainless Steel Stainless 1/4 Inch 30 Degree Washer for 1/8 Inch to 3/16 Inch Cable Railing Wood Metal Aluminum Posts DIY Balustrade
- Main function: these stainless steel angled beveled washers are designed for termination on end posts that have angled, or off set holes on stair railings, which can be screwed with threaded end terminals, suitable for short and long stud terminals, and even for tuner terminals.
- Size information: the 30 degree angle beveled washer comes in 1/4 inch in inner diameter and 5/8 inch in outer diameter, that suits for 1/8 inch and 3/16 inch staircase deck cable railing.
- Applicable to 1/8 inch stainless steel cable and threaded terminal stud end fitting.
- Reliable material: made of T316 marine grade stainless steel for maximum durability, our angled beveled washers with high tensile strength and strong resistance to rust and corrosion, can serve you for quite a long time.
- Applicable occasions: these reliable stainless steel angled beveled washers are practical and versatile for your own cable railing project and big scale indoor and outdoor applications, ideal for the the angle of garden, aluminum post of decking or stairs and aisle railing kit.
- Package included: you will receive 40 pieces 1/4 inch 30 degree angled beveled washers at once, enough quantity with fine workmanship that will satisfy your indoor or outdoor applications, practical for wood, steel, alum....
Check StockRAINPAL RBL022P Premium Rain Barrel Linking Kit(Two Brass Bulkhead Fittings and One 2 FT 3/4' I.D. Hose)
- Heavy Duty Bulkhead Fitting with Extra Thick and Flexible Hose..
- Brass Bulkhead Fitting Male 3/4" NH Garden Hose Threaded and Female 1/2" NPT Threaded, Large 36 mm Flange.
- 2 Ft 3/4" I.D. Hose with Female Garden Hose Threaded Connector.
- Need 27 mm or 1-1/16 inch Hole to Install.
- Designed for Irrigation with Rain Barrel. Compare Design, Weight, Quality and Choose RAINPAL.
Check StockR&T Tankless Smart Toilet Touchless Auto Flush 1.28-GPF Battery-Operated One-Piece HET Intelligent Toilet for Bathroom
- ...ng System】Low water pressure startup technology enable to flush the bowl with direct water supply from the pipe, applicable for residential house with low water pressure..
- 【Complete Installation Kit】 Comes with everything you need for installation. 2 angle valves available: NPT 1/2" threaded & G15/16" threaded compression fitting. Choose one that suits your current water supply..
- 【Water-Saving】EPA WaterSense: 1.28 GPF (HET: 4.8L per flush)..
- 【Item Dimension】Comfortable toilet seat height:17 inches (bowl height 15.35 inches), width: 16.14 inches, length: 27.16 inches. Rough-in Distance ≧12 inches..
- 【Direct Supply From Manufacturer】 We are global leading manufacturer and supplier of innovative high quality bathroom products. This smart bidet comes with 2 YEARS' warranty for residential application and 1 YEAR warranty for commercial application..
Check StockRefrigerator Icemaker Hose (20 FT) - Lead Free - Universal Fit - Water Supply Line - ¼” x ¼” Connections - Stainless Steel Braided
- ...olers, fridge dispensers and more. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. Our quality system ensures a superior level of product quality..
- ★COMPLETE DO-IT-YOURSELF KIT INCLUDE: 17 foot NSF certified 1/4 ro tubing in white, 1/4" shut off ball valve.
- compression fitting nut *1 set (1 insert, 1 sleeve, 1 nut)., 1/4" Tee fitting, 3/8 1/4 3/8 Tee fitting allows you to connect both 1/4" and 3/8" water line, professional tube cutter and teflon tape ,Everything you need to get professional results with a do-it-yourself install..
Check StockMonster&Master Brass Angle Stop Valve Shut Off Quarter Turn Water Sink Bathroom Toilet Kitchen Shower Plumbing MM-FV-002×5 5 Pack ?
- Long-term flexibility: Based on the universal valve system, you can change the faucet style without replacing any water pipes in the future..
- Ideal for residential and commercial applications. It is suitable for hot and cold-water supply with a water temperature of 40-165 degrees Fahrenheit..
- It should be connected to the power of a faucet, toilet, water dispenser or dishwasher during installation..
- Size: With a 1/2 inch female threaded and 3/8 inch OD compression fitting..
- Contractor 5 pack. 1 / 4-turn ball valve style, solid lead free brass, durable and easy on/off operation..
Check StockYonaka Compatible with Honda Accord 2008-2012 Spec 2 Full Coilovers Suspension Shocks Springs Struts
- All aluminum upper mounts 0-4" height adjustment Adjustment tools included Front springs: 12kg Rear springs: 6kg.
- Inner bump stop to prevent damage caused by rapid compression impacts.
- Wide range of height adjustment without changing the spring compression.
- Bottom of the shock is threaded to allow height adjustments without having to shorten the suspension travel Rubber dust shield protecting piston for....
Check Stock
