Categories

Best Threaded Copper Pipe

DANCO Decorative Bathtub Faucet Spout with Pull Up Diverter | 6 Inch Length | Chrome Finish (10315)

  • MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub..
  • CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple..
  • ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout..
  • DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead..
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 1/2 in. reach..
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation..
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures..
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...s durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule..
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right..
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • ...rn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule..
  • 100% QUALITY GUARANTEE – ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 1-year product warranty. Have any problem, please email us, we'll reply within 12 hours..
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush

  • Non-hardening, non-toxic paste with PTFE.
  • Use on threaded brass, copper, stainless steel, aluminum, black pipe, tin, polyethylene, polypropylene, polybutylene, ABS, PVC nylon and galvanized pipe threads, hoses and more.
  • Remains pliable in cold temperatures, working range is -100 degrees to 600 degrees fahrenheit.
  • Pressure range is 10,000 psi when sealing liquids and 3,000 psi when sealing gases.
Check Stock

DANCO Bathroom Tub Spout with Front Pull Up Diverter, Chrome Finish, 1-Pack (88052)

  • CLASSIC DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and has a versatile design that ONLY FITS A THREADED PIPE connection.
  • it DOES NOT FIT a copper pipe slip-fit connection.
  • CONNECTION SIZE: This Danco diverter tub spout has ½ in. IPS inside threads and will fit a 4 in. – 4-1/2 in. stub out from tiled wall.
  • DIVERTER INCLUDED: This tub spout includes a front diverter lift rod to allow water stream to flow downward into the tub or upward into showerhead.
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 in. reach.
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • BATHTUB SPOUT THREADED DIMENSIONS: The bathtub faucet spout metal threads measures 3-3/4 inch to threads from back of tub spout, so it is important to measure your stub out nipple to ensure it is at least 4 in. long.
  • HASSLE-FREE INSTALLATION: You will need adjustable pliers and plumber sealing tape to help prevent leaks and provide a better seal during installation. (VIDEO SHOWS MODEL INSTALLATION NOT THE EXACT SAME PRODUCT).
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures.
Check Stock

Starrett Bi-Metal Unique HSS Safe-Flex Hand Hacksaw Blade - Ideal for Contractors and Tradesmen - 12\ Length, 1/2\ Width, 0.024\ Thickness, 32 TPI, 2-Pack - KBS1232-2

  • T2 Technology provides a long hacksaw blade life.
  • Shatter-resistant, bi-metal construction allows saw blades to bend and flex without breaking.
  • Saw blades cut through black pipe, Unistrut, copper pipe, hardened steel, threaded rod and rebar.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

(60 pcs) M8-1.0, DIN 908, Metric, Pipe Plugs, Hex Socket Drive, Straight Thread, Steel, Plain

  • Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
  • Also known as Threaded Pipe Fittings or Threaded Screw Plugs..
  • An internal hex socket drive is also known as an Allen drive..
Check Stock

Sharkbite 24632LF 45° Hose Bibb 1/2" x 3/4" Multi Turn

  • INSTALLS IN SECONDS: 1/2 inch x 3/4 inch threaded hose bibb valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

PTFE Plumbers Tape, VCELINK Teflon Water Sealant Thread Tape, 520\ Length 1/2\ Width, Industrial Plumbing Tape Stop Leaks for Shower Heads and Pipe Threads (2 Rolls）

  • VCELINK Teflon Tapes can be used to connect threaded pipes. A good solution for enhancing the tightness of pipes..
  • WIDELY APPLICABLE: Plumbing tape is designed for home and threaded pipe applications. Suitable for the most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • GOOD QUALITY: the pipe sealant tape has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • EASY TO USE: Simply wrap the waterproof Teflon tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • PACKAGE AND AFTER-SALES: 2 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock