Outus PVC Bulkhead Fitting Water Tank Connector for Rain Barrels, Aquariums, Ponds or Water Tanks (2 Inches)

  • Product size: 2 inches PVC bulkhead fitting, measures approx. 52 mm x 108 mm.
  • Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
  • Please refer to the picture for the detailed size, and please make sure your barrel fits our product before purchasing.
  • Function: locking nut is reversed threaded.
  • The bulkhead fitting with 6 mm thick silicon seal gasket that will contour to the shape of the round barrels.
  • Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Easy to install: requires 3 inch hole saw to install.
  • Threaded from the front end, suitable for commercial and industrial use.
  • What you get: 1 piece oversized PVC bulkhead fitting in your package, efficient to use it on your water tank.
Check Stock

Class A Customs 25 Gallon Water Holding Tank NSF Approved T-2500

  • 25 Gallon Capacity Fresh Drinking Water Safe Holding Tank Manufactured by Class A Customs – NSF FDA Approved & BPA FREE – Fresh & Drinking Water Safe.
  • WATER TANK MEASUREMENTS: 33 1/2” Longest Length (not including fittings) x 10” x 17” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25″ on each measurement).
  • BUILT-IN FITTING: (TWO) 1½ ” Dia screw in balloon fitting (threaded female – NPT Standard) fitting will be closed, to use remove inner membrane with razor knife (TWO) ½ ” Dia screw in fittings (threaded female – NPT Standard).
  • NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish..
  • Great extra water storage in RV, pop-up camper, off road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item here in the US in Elkhart, Indiana. NSF paperwork readily available and NSF logo molded into the tank..
Check Stock

Renator Brass Rain Barrel Spigot Kit. Lead-Free Compliant. 3/4 Inch Quarter Turn Ball Valve. Rain Barrel Kit For Any Barrel Including 5 55 Gallon Drum Spigot Bucket. Spigot with Bulkhead Fitting, Tape

  • A QUALITY SPIGOT DESIGNED FOR MAXIMUM WATER FLOW. Make use of the water collected from your rain barrel easily and quickly. This spigot was specifically designed with a larger flow port to fully take advantage of water pressure in your rain barrel to produce superior water flow. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
  • NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
  • INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
Check Stock

Renator P72-02330G Brass Spigot for Rain Barrel. Lead-Free Compliant, 3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting, Thread Tape, and Polyester Wire

  • A QUALITY SPIGOT FOR YOUR RAIN BARREL. Make use of the water collected from your rain barrel easily. This spigot is designed to provide a strong water flow by relying on pressure from the water in your rain barrel. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
  • NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
  • INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
  • HEAVY-DUTY, DURABLE CONSTRUCTION. From using a brass ball valve and body and aluminu....
Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock

2 Pieces PVC Bulkhead Fitting for Rain Barrels, Aquariums, Water Tanks (3/4 Inch)

  • Function: locking nut is reversed threaded.
  • The Bulkhead Fitting with 4 mm thick silicon seal gasket that will contour to the shape of the round barrels.
  • Size: 47 mm x 58 mm, 3/4 inch, Material: PVC, Color: gray.
  • Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
  • Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Easy to install: one and done installation, threaded from the front end, commercial and industrial use.
  • You will get: 2 pieces PVC bulkhead fitting in your package, sufficient to use them on your water tanks and you can share them with your family and friends, they are good tools.
Check Stock

Icon 437 22-1/2\ x 18-1/2\ x 6\ Bottom Drain Holding Tank

  • Built-in reinforcements for mounting a toilet.
  • Includes: 3" Threaded Fitting, a 2" Slip Fitting and a 3"ID/7"OD Flange Fitting.
  • Features a bottom drain and an 8 gallon holding capacity.
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...ch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

Right Angle SO-239 to 3/8 x 24 Threaded Antenna Mount Adapter

  • Right Angle SO-239 to 3/8" X 24 Threaded Antenna Mount Adapter.
Check Stock

1\ UNISEAL Flexible Tank Adapter (Bulkhead) - 2 Pack

  • Heavy duty bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium.
  • Stock color is jet black to match acrylic tank backgrounds. Trusted AM Brand Only Available By Encompass All!.
  • All kits contain: bulkhead fitting, gasket, lock nut.
Check Stock

LIFEGARD Aquatics Standard Threaded Bulkhead Kit for Fish Aquariums – High-Impact Resistant PVC – Includes Bulkhead Fitting, Gasket, Lock Nut – Jet Black – 2 Inch

  • ELIMINATE AQUARIUM LEAKS: Eliminate the possibility of finding hidden cracks when filling aquariums with this double threaded bulkhead fitting kit from Lifegard Aquatics..
  • HIGH-IMPACT RESISTANT PVC BULKHEAD: Made with only the most durable and high-quality materials, this heavy wall bulkhead is molded with impact-resistant PVC and features a slip base..
  • JET BLACK BULKHEAD KIT: Properly attach plumbing to fish and coral aquariums with this bulkhead fitting kit that includes a jet black bulkhead fitting, gasket and lock nut..
  • MATCH ACRYLIC TANK BACKGROUNDS: Ensure plumbing is in place for your aquariums without distracting from the aesthetics with this Lifegard Aquatics double threaded bulkhead kit for fish aquariums and tanks..
  • YOUR GO-TO RESOURCE FOR AQUARIUM, POND & AQUACULTURE PRODUCTS: Lifegard Aquatics features an extensive line of high-quality aquaculture products that include fountains, pumps, bulkhead fittings and commercial aquatic and pond equipment. From crystal aquariums to full spectrum LED lighting, trust in Lifegard for all of your aquatic needs..
Check Stock

Outus 3/4 Inch PVC Bulkhead Fitting and Garden Hose Adapter Kit for Rain Barrels Aquariums Water Tanks

  • Specifications: size is 3/4 inch, material is PVC, applicable models is universal for most rain barrels, water tanks, ponds, or aquariums.
  • Package include: garden hose kit includes 3/4 inch PVC bulkhead fitting and 3/4 inch PVC garden hose adapter for rain barrels, water tanks, or aquariums, they are good tools.
  • Durable: will not fade, crack or peel, durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Easy to install: drill 1-3/8 inch or 1-1/2 inch hole to install, assemble the bulkhead and hose adapter together, threaded from the front end, commercial and industrial use.
  • Function: locking nut is reversed threaded, the bulkhead fitting with 4 mm thick premium silicone seal gasket that will contour to the shape of the round barrels.
Check Stock

Hayward PVC Basket Strainer, FPM Seal, 2\ Socket/Threaded

  • Strainer/skimmer hose fitting for applications such as construction and agricultural.
  • NPSM threaded hole connection on the top of the fitting.
  • Zinc plated steel for strength and resistance to corrosion.
Check Stock