Categories

Best Threaded Hardware

Continuous Sweep Mini Quartz Movement - Medium Shaft

  • Clock Movement Measurements: Total hand shaft length is 20.6 mm (13/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 7.9 mm (5/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 9.5 mm (3/8 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 9.5 mm (3/8 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Long Shaft

  • Clock Movement Measurements: Total hand shaft length is 28.6 mm (1 1/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 17.5 mm (11/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 19.1 mm (3/4 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If length is shorter or equal to 19.1 mm (3/4 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Short Shaft

  • Clock Movement Measurements: Total hand shaft length is 14.3 mm (9/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 3.2 mm (1/8 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 4.8 mm (3/16 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If the length is shorter or equal to 4.8 mm (3/16 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

Quartex Q-80 Quartz Clock Movement, 3/16” Max Dial Thickness, 5/8" Hand Shaft Length

  • Clock Movement Measurements: Total hand shaft length is 15.9 mm (5/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 4.8 mm (3/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 6.4 mm (1/4 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 6.4 mm (1/4 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

Chief RPAU Universal Projector Ceiling Mount

  • Convenient lamp and filter access on most projectors. Disconnecting maintains registration and does not affect preset adjustments..
  • Integrated cable management through top of the mount without additional accessories..
  • Multiple installation options: Flush mount to ceiling, 0.25" threaded rod, or 1.5" NPT threaded extension column..
  • All-Points Security Systems provides exclusive steel into steel locking hardware at all connection points to protect against theft..
Check Stock

Marks Hardware 91A-RH Mortise Lock, Right Hand

  • Marks Hardware Inc. 91A-RhDescription2-1/2" Backset, solid brass 1" throw deadbolt, rocker switch to lock or unlock outside knob, 2-piece threaded spindle, 5-pin solid brass 1-1/4" cylinder, solid polished brass knobs with set screws. Exterior plate 2-3/4" x 10", interior plate 2-1/4" x 7". Right hand. Min. Order: 1 EA - Manufacturer: Marks Hardware Inc..
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

CDHPOWER Black BB Bottom Bracket Conversion Kit (American to Euro) Black Color

  • Black BB Bottom Bracket Conversion Kit (American to Euro).
  • Converting a non-threaded 68mm American BB shell to an English threaded Euro BB bottom bracket.
  • This product Comes with 12months Warranty. Any questions,please contact us firstly! we can help you solve the problem until you are satisfied..
Check Stock

Prime-Line M 6151 Tub Enclosure Rollers, 3/4 inch, 4-Pack , White

  • Used by a variety of tub and shower door manufacturers.
  • Use of these rollers replace worn and rusted wheels to help restore smooth sliding of shower doors.
  • Threaded hex head hub with 3/4 in. diameter roller.
  • Constructed of (convex/round edge) nylon rollers with steel ball bearings and non-threaded hubs.
Check Stock

VideoSecu 5 White Universal Satellite Studio Speaker Mounts/Brackets for Walls and Ceilings 1Y0

  • Ideal for mounting home theater satellite speakers on walls or ceilings weighing 8 pounds or less.
  • Made of durable, weather resistant, injection molded fiber resin reinforced polymer.
  • Multiple tilt and swivel pivot points allow perfect directional speaker aiming.
  • Designed to fit most home theater satellite speakers with one threaded mounting hole, two threaded mounting holes or keyhole mounting systems.
Check Stock

Incra IMS2 24-Inch Incra Miter Slider

  • Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist.
  • Locks securely in any standard miter gauge slot with another twist of the wrist.
  • Includes threaded mounting holes and hardware for easy attachment to any application.
  • Includes plans for a wide variety of shop-made jigs and fixtures.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Weber 69857 Logo Label for Spirit 200 and 300 Series Grills (2013-2015 Models) and Genesis 200 & 300 Series Grills (2007-2010 Models).

  • Genuine Weber part 69857 Logo Label for many Spirit 200 and 300 series grills (2013 - 2015 Models) and Genesis 200 and 300 series grills (2007-2010 Models)..
  • Threaded post with nut in the center and smaller, non-threaded post 1-3/8" to the right (when viewing back of logo)..
Check Stock