Categories

Best Threaded Insert

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 3/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 5/8" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1-1/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1-1/4" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
  • IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
Check Stock

Metal Threaded Star Type Insert for 1 OD Round or Square Tubing - Threaded Star Tube Insert - Round or Square Tubing Insert 1/4-20 Threads - Threaded Tubing Inserts Threaded Tube Inserts 16

  • 16 Pack Threaded Star Type Round or Square Tubing Insert 1/4-20 Threads.
  • Round or Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Metal star type inserts are designed to insert inside steel tubular legs.
  • Round or Square Tubing Threaded Insert - Our metal tube connectors are designed to grip the inside of tubing and prevents the insert from slipping out....
  • Threaded Inserts for Round or Square Tube - These versatile products are commonly used in ductwork supports, rack units, RV ladders, and cross member....
Check Stock

E-Z LOK Coil Threaded Insert For Metal 18-8 Stainless Steel Helical Wire Thread Insert 8-32 Internal Threads, 0.328\ Length, Pack Of 10

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 8-32 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z LOK Coil Threaded Insert for Metal 18-8 Stainless Steel Helical Wire Thread Insert 1/2-13 Internal Threads, 0.750\ Length, Pack of 5

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 1/2-13 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

1/4-20 Threaded Insert for Wood Hex Drive Threaded Wood Inserts 1/4 Wood Nuts 40 Pieces

  • 1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws..
  • Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm..
  • Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided..
  • In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place..
  • In very Harder wood such as white oak or maple, drill a hole size (3/8.
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, #6-40 Internal Threads, 0.138\ Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

1/4-20 Threaded Insert Kit for Wood Furniture Screw Threaded Wood Insert Nut 10mm 15mm 20mm Length 61-Piece

  • 20 pieces of 1/4-20 x 20 mm threaded inserts + 20 pieces of 1/4-20 x 15 mm threaded inserts + 20 pieces of 1/4-20 x 10 mm threaded inserts + 1 piece 6mm hex key..
  • Threaded inserts are made of carbon steel, they feature durable construction for a long-lasting hold..
  • Threads diameter of 1/4-20 x 20mm / 15mm: 0.410" / 10.4mm, threads diameter of 1/4-20 x 10mm: 0.389" / 9.9mm..
  • Threaded Inserts are best for composite materials, soft wood, plywood and hardwood, you just need to drill a hole that the size of the body into the wood for the threaded insert..
  • Hex Drive Threaded Insert with 1/4-20 Internal Thread Size, the hexagon drive allows for easy installation..
Check Stock

20pcs M12 x 1.25 x 1.5D Wire Thread Insert Stainless Steel Metric Helicoil Type Thread Repair Insert

  • There is a box which you can store and convenient to carry.
  • It is convenient and quick to convert and inch threaded holes with wire threaded inserts..
  • In the event of a threading error or repair of a damaged female threaded hole, a threaded insert can be used as a means of repair to provide a cost-effective recovery of the screw hole..
  • The wire threaded insert set are placed in the screw hole of the workpiece such as aluminum alloy to form a high-strength, wear-resistant, high-accuracy female thread..
  • High quality stainless steel material can make sure the durability and stability of the product.
Check Stock

Round Plastic Threaded Tube Inserts - 4 Pack Threaded 1\(OD) Round Plastic Tubing Insert 1/4-20 Threads - Threaded Tubing Inserts Threaded Tube Inserts Round Tubing Inserts

  • 4 Pack Round Plastic Threaded Tube Inserts, Threaded Tube Ends.
  • Round Tubing Threaded Insert fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Threaded Round Plastic Tubing Insert with 1/4-20 metal threads that supports for smooth and frequent adjustments.
  • Threaded Inserts for Round Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

E-Z Lok Threaded Inserts For Metal Assortment Kit Carbon Steel Metric Internal Threads M3-0.5 M4-0.7 M5-0.8 M6-1.0 M8-1.25 50 pieces

  • THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit..
  • AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock