Categories

Best Threaded Insert Tool

Fafeicy 10Pcs Thread Inserts Kit, Male Female Thread Reducing Nut, Thread Locking Inserts, for Thread Repair Tool, Nut

  • A threaded insert can be used to repair the threaded hole in a costeffective manner when a thread error occurs, or a damaged female threaded hole is repaired..
  • Widely used in aviation, automobiles, steam turbines, electronic communications, computers, lamps, molds, mechanical equipment and radiators..
  • The thread reducing nut is an effective thread repair tool set, including 10pcs threaded inserts, simple to install..
  • The thread repair tool adopt goodquality stainless steel to ensure the durability, and stability of the product..
  • Moderate size: Female thread M6x1.0mm, Male thread M10x1.5mm. Stable structure, excellent performance , and has a long service life..
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

POWERTEC QTI1004 Threaded Inserts for Wood Furniture | Zinc Plated | 3/8”-16 Internal Threads | 18mm Length – Pack of 50

  • INCLUDES: (50 pack) 3/8-16 Threaded Inserts (also referred to as Insert Nuts).
  • FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
  • VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
  • EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71380(not included) after drilling the appropriately sized hole.
  • SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 3/8”-16, Total Length 0. 709 (18mm).
Check Stock

POWERTEC QTI1002 Threaded Inserts for Wood Furniture | Zinc Plated | 1/4”-20 Internal Threads | 11.9mm Length – Pack of 50

  • INCLUDES: (50 pack) 1/4-20 Threaded Inserts (also referred to as Insert Nuts).
  • FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
  • VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
  • EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71383(not included) after drilling the appropriately sized hole.
  • SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 1/4"-20, Total Length 0. 468”(11. 9mm).
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (10 pcs)

  • The hand screw tap used to make new M6 threads or re-thread damaged and/or jammed threads..
  • Wire thread insert tool is a tool specially used when installing (or removing) wire thread inserts..
  • The set also includes 6pcs M6*1*1.5D and 6pcs M6*1*2D threaded insert screw made of 304 stainless steel for use..
  • They are widely widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
  • It is cheap and can satisfies your practice of tapping,screw insert installation and removal.For a beginner,they are a good combination..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • ...universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
  • Use the breaking pin tool to remove tang from insert.
Check Stock

NEXTACK Rivet Nut Tool Rivet Nut Kit with a Step Drill Bit & 80pcs Nutsert Designed for Tight Space, 8' Rivnut Tool with 8pcs Mandrels Incl. 6-32 & 8-32 in Organized Storage Case NT600

  • ONE-STOP-SOLUTION: The rivnut tool kit comes with a step drill bit, 8 universal interchangeable mandrels (4 SAE 6-32, 8-32, 10-24, 1/4-20 and 4 Metric M3, M4, M5, M6), 80 carbon steel threaded nuts (10 for each mandrel), a professional user manual, and an organized storage carrying case. It is an essential one stop solution for your next riveting project..
  • EASY TO USE: The nutsert rivet gun features modular detachable design for easy riveting, mandrels changing and maintenance, rotary knob structure for easy nut loading and releasing..
  • STURDY & DURABLE: The threaded insert hand riveter consists of quality steel arm with blacken and heating treatment, aluminum alloy body, and thick non-slip PVC grips. It prevents from corrosion and deformation and prolongs the life cycle..
  • DESIGNED FOR TIGHT SPACE: The rivnut tool kit is packed in a well-organized compartmented case for safe storage and convenient portability. It is designed for grab-and-go use and to solve out-of-reach riveting problems for any confined narrow spots..
  • WIDE APPLICATION: The threaded insert riveter tool kit can be used to securely join together materials including metal, fiberglass, plastic or wood in different occasion like van wall, metalworking, railway, aviation, bicycle, off-road, RV ....
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts

  • 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock