Categories

Best Threaded Insert Tool For Wood

POWERTEC QTI1002 Threaded Inserts for Wood Furniture | Zinc Plated | 1/4”-20 Internal Threads | 11.9mm Length – Pack of 50

  • INCLUDES: (50 pack) 1/4-20 Threaded Inserts (also referred to as Insert Nuts).
  • FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
  • VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
  • EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71383(not included) after drilling the appropriately sized hole.
  • SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 1/4"-20, Total Length 0. 468”(11. 9mm).
Check Stock

1/4-20 Threaded Insert for Wood Hex Drive Threaded Wood Inserts 1/4 Wood Nuts 40 Pieces

  • 1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws..
  • Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm..
  • Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided..
  • In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place..
  • In very Harder wood such as white oak or maple, drill a hole size (3/8.
Check Stock

40 Pack Threaded Insert Nutsert, 1/4\-20 x 15mm Screw in Nut Threaded Wood Inserts, for Wood Furniture(with 1/4\ Allen Wrench)

  • Size: Insert head diameter: 0.445" (11.3mm), body diameter: 0.315"(8mm), threads diameter: 0.410"(10.4mm),1/4-20 threaded insert length: 0.591"(15mm).
  • Material: High quality carbon steel with high hardness, can keep a long-lasting hold..
  • Application: These furniture screws are suitable for wood furniture, hardwood or solid wood, such as furniture combinations(Threaded inserts are used to drill the right size hole and Install with hex key provided, and screw in nut connector screws)..
  • Recommended drill bit for wood: For Soft Wood-- 3/8" (8.5mm/9mm)dirll bit in soft wood, the threads cut will easily go into the wood.
  • For Hard Wood-- 3/8" (10mm),pls drill a hole that close to the outside threads diameter.If the hole is too small, Screwing it may split the wood or insert. If you are not sure the harness of the wood material, pls drill a proper sized hole for test before installing it..
  • Package included: 40 *1/4-20 Threaded Insert Nutsert + 1*1/4"(6mm) Allen Wrench..
Check Stock

NEXTACK Rivet Nut Tool Rivet Nut Kit with a Step Drill Bit & 80pcs Nutsert Designed for Tight Space, 8' Rivnut Tool with 8pcs Mandrels Incl. 6-32 & 8-32 in Organized Storage Case NT600

  • ONE-STOP-SOLUTION: The rivnut tool kit comes with a step drill bit, 8 universal interchangeable mandrels (4 SAE 6-32, 8-32, 10-24, 1/4-20 and 4 Metric M3, M4, M5, M6), 80 carbon steel threaded nuts (10 for each mandrel), a professional user manual, and an organized storage carrying case. It is an essential one stop solution for your next riveting project..
  • EASY TO USE: The nutsert rivet gun features modular detachable design for easy riveting, mandrels changing and maintenance, rotary knob structure for easy nut loading and releasing..
  • STURDY & DURABLE: The threaded insert hand riveter consists of quality steel arm with blacken and heating treatment, aluminum alloy body, and thick non-slip PVC grips. It prevents from corrosion and deformation and prolongs the life cycle..
  • DESIGNED FOR TIGHT SPACE: The rivnut tool kit is packed in a well-organized compartmented case for safe storage and convenient portability. It is designed for grab-and-go use and to solve out-of-reach riveting problems for any confined narrow spots..
  • WIDE APPLICATION: The threaded insert riveter tool kit can be used to securely join together materials including metal, fiberglass, plastic or wood in different occasion like van wall, metalworking, railway, aviation, bicycle, off-road, RV ....
Check Stock

50pcs 1/4-20 Threaded Insert for Wood Furniture Insert Nuts Screw in Nuts 3/5\ Length

  • Pack of 50 Hex Drive 1/4-20 Threads x 3/5" Length Threaded Insert Wood Insert Nuts Furniture Screw in Nut..
  • Threaded insert head diameter: 0.461" / 11.7mm, body diameter: 0.315" / 8mm, threads diameter: 0.410" / 10.4mm..
  • 1/4-20 Insert nut goes into a predrilled hole in wood and has internal threads, the Screw-In insert offers a strong permanent thread for wood..
  • In Soft wood, recommended drill bits are 8.5mm, 9mm, 3/8 inch, (As best practice varies between applications, you should decide the proper drill bit yourself according to the hardness of your material.).
  • In Hard wood such as white oak or maple, recommended drill bits are 3/8 inch, 9.5mm, 10mm, (As best practice varies between applications, you should decide the proper drill bit yourself according to the hardness of your material.).
Check Stock

1/4-20 Threaded Insert Kit for Wood Furniture Screw Threaded Wood Insert Nut 10mm 15mm 20mm Length 61-Piece

  • 20 pieces of 1/4-20 x 20 mm threaded inserts + 20 pieces of 1/4-20 x 15 mm threaded inserts + 20 pieces of 1/4-20 x 10 mm threaded inserts + 1 piece 6mm hex key..
  • Threaded inserts are made of carbon steel, they feature durable construction for a long-lasting hold..
  • Threads diameter of 1/4-20 x 20mm / 15mm: 0.410" / 10.4mm, threads diameter of 1/4-20 x 10mm: 0.389" / 9.9mm..
  • Threaded Inserts are best for composite materials, soft wood, plywood and hardwood, you just need to drill a hole that the size of the body into the wood for the threaded insert..
  • Hex Drive Threaded Insert with 1/4-20 Internal Thread Size, the hexagon drive allows for easy installation..
Check Stock

E-Z LOK EZ-329-6 Thread Repair Kit for Metal Carbon Steel Threaded Inserts 3/8-16 and Installation Tools

  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair tool kit..
  • CARBON STEEL INSERTS – Kit includes standard carbon steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • KIT INCLUDES – Convenient kit includes threaded inserts for metal, drill, tap, and threaded insert installation drive tool..
Check Stock

E-Z Lok Threaded Inserts For Metal Assortment Kit Carbon Steel Metric Internal Threads M3-0.5 M4-0.7 M5-0.8 M6-1.0 M8-1.25 50 pieces

  • THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit..
  • AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

1/4-20 Threaded Inserts for Wood T Nuts 1/4-20 Bolts Fully Threaded Button Head Hex Socket Screws 1 1-1/4 and Washers

  • This kit contains 40-Piece of 1/4-20 Threaded Inserts - 3/5" Length, 20 Piece of 1/4-20 tee nuts - 2/5" length, 30-Piece of 1/4-20 Bolts - 1" length, 10-Piece of 1/4-20 Bolts 1-1/4" length, 40-Piece of 1/4-20 washers..
  • 1/4-20 threaded inserts and t nuts are made of Carbon Steel ,zinc plated. 1/4-20 bolts and washers are made of stainless steel, they feature corrosion-resistance and rust-resistance..
  • Drilling Size for threaded inserts: ~soft wood - 23/64", if small, use 3/8", ~ hard wood - 3/8", if small, use 25/64"..
  • T nuts are great for furniture making and many wood project while leaving a flush surface, Barrel Height: 5/16″/ 7.9mm, Flange Diameter: 11/16″/ 17.5mm, Barrel diameter: 5/16″/ 7.9mm, Overall Height: 3/8″/ 9.5mm..
  • Wood threaded insert kit with screws, washers and t-nuts is ideal for wood furniture repair projects..
Check Stock

Glarks 175Pcs M4 M5 M6 M8 M10 Threaded Insert Nuts Kit Including 7 Sizes Hex Socket Screw Inserts and 6 Sizes T-Nuts 4 Pronged Tee Blind Nuts with Hex Wrenches for Wood Cabinet Furniture

  • ➤[Package Includes]: This package includes 60pcs 6 sizes alloy steel threaded insert nuts: M4 x 10, M5 x 10, M6 x 10, M6 x 15, M8 x 20, M10 x 25.
  • 50pcs 5 sizes carbon steel threaded insert nuts: M6 x 10, M6 x 15, M8 x 15, M8 x 20, M10 x 25.
  • 60pcs 6 sizes T-nuts: M5 x 8, M6 x 10, M6 x 16, M8 x 10, M8 x 16, M10 x 20.
  • and 5pcs M4/M5/M6/M8/M10 hex wrenches, which are well packed in a transparent plastic box for convenient transportation and storage..
  • ➤[High Quality Material]: These furniture screws are divided into 2 set, one set is made of zinc alloy steel, and the other set is made of carbon steel, both feature rust, corrosion and oxidation resistance, durable enough to withstand bad weather and environment change. T-nuts are made of zinc alloy steel, zinc coated makes it stronger and last longer than other nuts on the market..
  • ➤[Threaded Insert Nuts]: Threaded insert nuts design with flat standard hex socket head to make nuts head at the same level with applied surface, and maintain the surface of applied furniture clean and tidy. Fully threaded inserts can insert into wood firmly, not easy to pull out..
  • ➤[T-Nuts]: These T-nuts with serrated design can extend the surface between the nuts and work piece, non-slip and easy to lock. The compact thre....
Check Stock

POWERTEC QTI1001 Threaded Inserts for Wood | 3/8”-16 Internal Threads, Zinc Alloy – 50 Pack

  • QUALITY: Manufactured with premium zinc alloy, these woodworking fasteners are able to deliver exceptional strength, long-term durability and optimal performance.
  • APPLICATIONS: Perfectly suitable for furniture assembly, display cases, and projects utilizing plywood, fiberboard, composition board, pine, or other soft wood material.
  • Drill a hole sized for the body of the insert, and install these flanged nuts with a hex key.
  • SPECS: 3/8-16 threaded insert | 63/64” Long.
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

E-Z LOK 400-428 Threaded Insert, Brass, Knife Thread, 1/4\-28 Internal Threads, 0.500\ Length (Pack of 25)

  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool..
Check Stock