Categories

Best Threaded Plastic Insert

Bakelite Ball Knob Ball Handle with M5 M6 M8 M10 M12 M16 Female Thread Brass Insert(M6x20(1pcs))

  • Phenolic Round Ball Knob has a Brass Threaded Insert. The smooth surface gives a dressed-up finished appearance..
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles..
  • high quality phenolic plastic female threaded knobs for durability and long service life.
  • Threaded brass insert knobs are good for control levers and push-pull rods..
  • Black Plastic Round Ball Knob Handle make it an ideal replacement knob for machine handles.
Check Stock

POWERTEC 71127 Jig and Fixture T-Track Hardware Kit w/Knobs and 1/4 -20 Threads | 128 Piece Set

  • Function: A comprehensive selection of hardware perfect for your creating your own t-track woodworking jigs and fixtures.
  • T-Bolts: (20) 1 in. / (20) 1-1/2 in. / (10) 2-1/2 in. / (10) 3-1/2 in. t-bolts - all precision machined of zinc plated hardened steel with 1/4-20 threads.
  • Knobs: (6) 2 in. t-shaped knobs / (4) 5-star insert knobs / (4) 5-star bolt knobs / (6) 4-star insert knobs / (6) 4-star bolt knobs / (10) 1 in. round knobs – all constructed of premium black, hardened plastic with threaded through inserts.
  • Threaded Inserts: (16) 1/4"-20 threaded inserts / (16) t-nuts.
  • Convenient Storage: (1) Plastic sorting case with assorted and movable dividers for quick access and easy hardware organization.
Check Stock

Innovative Components AN4C1750F621 2.38\ Fluted knob 1/4-20 x 1.75\ steel zinc stud black pp (Pack of 10)

  • Female threaded plastic phenolic knob with threaded brass insert.
  • The Gloss finish bulb knob rests comfortably in the palm when gripped..
  • 3/8 16 thread Female Oval Tapered Knob w/ Brass Threaded Insert.
Check Stock

DimcoGray Female Threaded Ball Knobs - 1 7/8 Dia., 3/8-16 Thread Brass Insert, Female Black Phenolic Plastic Ball Knob with Threaded Insert- Inch. Female Round Thread Machine Handle (1 Each)

  • 1 7/8" Diameter Threaded Knob Threaded Insert. The smooth surface gives a dressed-up finished appearance..
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles..
  • Threaded brass insert knobs are good for control levers and push-pull rods..
  • Black Plastic Round Ball Knob Handle make it an ideal replacement knob for machine handles.
Check Stock

DimcoGray Female Tapered Knob - 1 5/8 Dia 3/8-16 Thread Oval/Tapered Plastic Phenolic Knob Brass Insert Black Plastic Knob with Threaded Insert 1 Each

  • Female threaded plastic phenolic knob with threaded brass insert.
  • The Gloss finish bulb knob rests comfortably in the palm when gripped..
  • 3/8 16 thread Female Oval Tapered Knob w/ Brass Threaded Insert.
Check Stock

DimcoGray Threaded Ball Knobs - 1 5/8\ Dia., Brass Insert 7/16-20\ Depth, Female Black Phenolic Plastic Ball Knob with Threaded Insert- Inch Female Round Thread Machine Handle (1 Each)

  • Phenolic Round Ball Knob has a Brass Threaded Insert. The smooth surface gives a dressed-up finished appearance..
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles..
  • high quality phenolic plastic female threaded knobs for durability and long service life.
  • Threaded brass insert knobs are good for control levers and push-pull rods..
  • Black Plastic Round Ball Knob Handle make it an ideal replacement knob for machine handles.
Check Stock

Qty 20 M3 3mm M3-0.5 Brass Threaded Metal Heat Set Screw Inserts for 3D Printing

  • ➨ Pack of 20 (Twenty) threaded inserts - great for restocking one of our insert assortments..
  • ➨ These create much more convenient and professional parts than using "captive nuts" (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work..
  • ➨ These are inserted into a hole in the print that is slightly smaller than the insert, and set in place using a soldering iron to melt the plastic around the insert. The inserts have a slight taper and small fins that the plastic flows around, resulting in an extremely strong bond..
  • ➨Rather than adjust designs around the limitations of 3D printing (supports, print bed size, etc), divide your parts into separate components that fasten using these inserts and machine screws. Not only does this give you greater flexibility when designing a part, but also allows you to re-print only failed components rather than full assemblies - saving time and money..
  • ➨ These are threaded M3-0.5 with an overall length (OAL) 3.85mm Outer diameter at the top (wider end) is 5.6mm, bottom is 5.12mm Hole size in your product should be slightly smaller than the insert, to allow plastic ....
Check Stock

DimcoGray 1-277-012 Fluted Knob 1\ Diameter, 1/4-20 Thread, Oval/Tapered Plastic Phenolic Knob Brass Insert. Black Plastic Knob with Threaded Insert (1 Each)

  • 1/4-20 thread Female Oval Tapered Knob w/ Brass Threaded Insert.
  • The Gloss finish bulb knob rests comfortably in the palm when gripped..
  • Fluted Tapered knob with oval style 1" in diameter.
  • Female threaded plastic phenolic knob with threaded brass insert.
Check Stock

XINGYHENG 210pcs M3 M4 M 5 M6 M8 M10 M12 Wire Thread Inserts Steel Sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for soft wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard hex shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREAD INSERTS – This threaded insert tool is used exclusively to quickly drive in Hex Drive Inserts..
  • IT’S AS EASY AS 1-2-3 – Installation is easy. Simply drill a hole with a standard drill. Thread an E-Z LOK thread insert into place with this optional drive tool..
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts

  • 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 3/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 5/8" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock